aymeric
6a808ce8c8
Initialize VIA Technologies' 82C686's ICU as if it were a 82C586.
...
This fixes interrupt allocation problems on modern Compaq laptops.
2001-01-05 18:39:12 +00:00
bouyer
69153b6b36
Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision
...
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
2001-01-05 18:04:42 +00:00
tsutsui
52f9536913
Add isapnp devices.
...
XXX CS4232 is not probed properly.
2001-01-05 17:55:38 +00:00
tsutsui
d78ca7c54a
Add isapnp attachment for prep.
2001-01-05 17:49:43 +00:00
bouyer
cbf42ca2d1
Ops, make it compile again.
2001-01-05 15:34:05 +00:00
fvdl
3950869204
Set Linux version to 2.0.38 for now, until the clone + "real time signal"
...
problems are fixed.
2001-01-05 15:31:15 +00:00
bouyer
5c800a0dab
Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747.
2001-01-05 15:29:39 +00:00
bouyer
2a63f0a46c
Add support for Ultra/100 on the HPT370
...
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
2001-01-05 15:20:53 +00:00
takemura
5d91708fb9
Generating workspace and project files for eMbedded Visual Tools 3.0.
2001-01-05 15:00:56 +00:00
martin
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
martin
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
sato
37682e5488
- print debug message for WSDISPLAYIO_GETPARAM/WSDISPLAYIO_SETPARAM
...
when boot verbose mode.
for debuging LCD control and/or keyboard cmds.
2001-01-05 09:09:48 +00:00
sato
78242b5fd8
- fix WSDISPLAYIO_MODE_EMUL mode redrawing.
...
- avoid null pointer dereference.
- clean up hpcfb_show_screen().
2001-01-05 09:04:55 +00:00
mjacob
6cb4620b76
(some of these changes were made in the previous revision- oops)
...
Say which mailbox command times out (polled or interrupting). Also,
give them a bit more time to timeout (5 seconds instead of 2).
2001-01-05 07:03:54 +00:00
mjacob
9d7f6e219f
Ian McDonnell <apriori@world.std.com> made me see the error of my ways.
...
*Cough*. Ahem. I hadn't been setting error to XS_SENSE when there was
a check condition. Major blunder.
2001-01-05 07:02:00 +00:00
augustss
49f333783f
Don't make local defines for stuff that's already in ac97reg.h.
2001-01-05 03:33:39 +00:00
augustss
5f3c3e0d6f
Add definitions for some bits in ID and STATUS regs.
2001-01-05 03:32:46 +00:00
augustss
cc9f003455
Add some codecs.
2001-01-05 03:32:11 +00:00
marcus
fb7be69768
Fixed initial cache setup to handle launch from P2 as well as P1.
2001-01-05 01:14:31 +00:00
marcus
d1e05bffc3
Updated linker script set include only RAM based image for Dreamcast.
2001-01-05 01:13:23 +00:00
tsubai
0374c83129
Fix lost-software-interrupt bug.
2001-01-04 15:01:25 +00:00
itojun
6562709f3a
typo fix. PR 11889
2001-01-04 11:48:44 +00:00
bouyer
4dc117d433
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed.
...
Thanks to Bernd Ernesti for pointing this out.
2001-01-04 11:34:27 +00:00
itojun
828bec041b
committed local change by mistake :-)
2001-01-04 09:49:29 +00:00
itojun
a8507fa1e7
pkgsrc/cross/sh-* do not supply cpp
2001-01-04 08:55:08 +00:00
veego
3e63d458f0
Use COM_FREQ for COM part of the last commited entry.
...
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
2001-01-04 08:49:31 +00:00
veego
17718db1b9
Add support for boards with an Oxford Semiconductor chip.
...
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
itojun
26b1bcce00
cc -v is too verbose
2001-01-04 08:39:53 +00:00
itojun
973149dcb3
sh3 split
2001-01-04 08:32:02 +00:00
itojun
a629edfcca
use -O1 for now, -O2 dies
2001-01-04 07:55:32 +00:00
sato
c381bbbf74
add missing evtype.
2001-01-04 07:55:15 +00:00
itojun
da0e17f08c
fix pathname to meet pkgsrc/cross/sh*
2001-01-04 07:51:50 +00:00
itojun
8a58f991f6
content were mixed up
2001-01-04 07:50:23 +00:00
sato
58b63998c2
handle pointer type event message and scaler type event message
...
for CONFIG_HOOK_PMEVENT_*.
2001-01-04 07:43:37 +00:00
itojun
156bea1018
nuke obsolete Makefile templates.
...
split build-sh3 into two, for sh3e[bl].
2001-01-04 07:09:47 +00:00
mycroft
f73703a4a6
Set the play and record parameters separately.
...
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
2001-01-04 07:05:00 +00:00
itojun
1e7e3274f4
split MACHINE_ARCH sh3e[lb]. userland build still needs checking.
2001-01-04 07:03:21 +00:00
itojun
f039f89ec5
prepare for sh3e[bl] split
2001-01-04 06:53:45 +00:00
minoura
cd4d6511c8
Correct `Year 2001 problem'.
...
Pointed out by Okamoto Kohichi <GHG03305@nifty.ne.jp> and
URA Hiroshi <ura@hiru.aoba.yokohama.jp>.
2001-01-04 06:45:18 +00:00
mycroft
c142ce184b
Several things:
...
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
2001-01-04 06:20:49 +00:00
sato
46921fecee
Avoid null pointer dereference. dc_sc may be null on early stage.
2001-01-04 06:07:43 +00:00
enami
f306f72978
Use cast where appropriate to avoid integer overflow.
2001-01-04 06:07:18 +00:00
takemura
d403e873db
Delete types.h and int_types.h in stand/include/mips and
...
use types.h and int_types.h with __COMPILER_INT64__ in kernel source.
The version of the binaries get 1.16.4.
2001-01-04 06:01:41 +00:00
mycroft
6ff81e44ec
No really, this is half-duplex for now. Lame.
2001-01-04 05:25:24 +00:00
sato
9d298fafdb
adapt resent config_hook.h
2001-01-04 05:20:37 +00:00
sato
9eb0981033
re-define CONFIG_HOOK NICKNAME.
...
add some macros.
2001-01-04 05:16:26 +00:00
shin
ce0d1ad2fe
- don't ignore DEFCOPTS (Makefile.mips).
...
- DEFCOPTS of hpcmips is "-Os -mmemcpy" (std.hpcmips).
2001-01-04 05:13:30 +00:00
sato
3131dc2c04
make compilable.
2001-01-04 05:01:59 +00:00
itojun
a493f2d3fd
typo. struct fpregs -> struct fpreg
2001-01-04 04:42:59 +00:00
mycroft
ab1d9b87b0
Make some vague attempt to handle devices that do both input and output. This
...
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
2001-01-04 03:53:09 +00:00