ea872628e6
XXX: note pairwise cascaded test inversion in permit_star.
...
Add checkyesno check_homes_permit_usergroups to allow group writability
when the groupname matches the username. Defaults to off.
2003-11-18 03:23:53 +00:00
4828bcfb5b
check_homes_permit_usergroups=NO
2003-11-18 03:21:40 +00:00
845cc26789
Add iso-image-md-pre and iso-image-md-post targets. Installation media can
...
now be built with the iso-image target from ${NETBSDSRCDIR}/etc.
2003-11-15 08:58:27 +00:00
67702193cc
explicitly pass MACHINE and MACHINE_ARCH to MAKEDEV.awk via environment,
...
so that this works as expected when not invoked via build.sh
2003-11-15 08:50:26 +00:00
96dd3017c1
Adapt to new config file naming convention.
2003-11-13 02:33:39 +00:00
eb0fcf4886
Add html4/hpcsh.
2003-11-05 08:22:16 +00:00
212800e523
/usr/share/man/{cat,man}4/hpcsh
2003-11-05 02:53:38 +00:00
07a0e27c44
Revert the change in default value of ipv6_v6only. Further discussion
...
on this topic is required. It should be reintroduced and pursued in
the IETF.
2003-11-03 15:12:06 +00:00
6f4bc2c877
Announce a reason for the shutdown.
2003-11-01 23:04:54 +00:00
4318508981
'rd' under 'all' should be 'rd2', so make it so.
2003-11-01 19:02:54 +00:00
d6fa98c3f0
getttyent(3) was changed to complain about unknown words at the end of
...
tty definitions. Use '#' to separate comments.
2003-10-30 20:40:20 +00:00
adfa67a197
Oops, fix comments.
2003-10-30 17:42:23 +00:00
87c704cac0
Add dummy scripts for these events.
2003-10-30 17:34:45 +00:00
1455475ac4
Use logger(1) to log errors -- otherwise the output goes nowhere.
2003-10-30 17:32:45 +00:00
9f320f289d
Dig man4 for sparc64.
2003-10-30 08:16:41 +00:00
8098923219
Make the ntp.conf parsing more specific, and therefore more robust. Closes
...
PR bin/23305.
2003-10-29 19:00:14 +00:00
0ff71b5cba
the arm ports are 'arm' and 'armeb'
...
pointed out by Shoichi Miyake
2003-10-28 11:34:14 +00:00
5a770ba2d8
Toggle the default value of ip6_v6only. Also provide a sample sysctl to
...
retain the existing behavior.
2003-10-28 06:31:28 +00:00
7833f0afc9
now that MAKEDEV is generate, install it from ${.OBJDIR}
2003-10-26 23:34:29 +00:00
3d29fcd1f7
Fix previous:
...
* Restore previous functionality which supported running postinstall
with an extracted etc.tgz set as the "source" directory (i.e,
/usr/src isn't available). We do this by generating the MAKEDEV
to ${SCRATCHDIR} if the real source is available, and leverage off
the compare_dir() code that the rest of postinstall uses to support
this functionality.
* Don't special case MACHINE_ARCH==arm; the MAKEDEV.awk should
be doing that since etc/Makefile doesn't have similar special
case code. In any case, AFAICT the only MACHINE_ARCHs are
"arm" and "armeb"; there is no "armel" in NetBSD.
2003-10-26 23:08:29 +00:00
ef31c1b29a
update for unified, dynamically generated MAKEDEV - change 'makedev' item
...
to generate the MAKEDEV to scratch dir and compare that with the currently
installed /dev/MAKEDEV; also add -a MACHINE_ARCH option to explicitly
set machine architecture for non-native builds
problem with postinstall pointed out by Patrick Welche and Hubert Feyrer
in private e-mails
2003-10-26 21:57:11 +00:00
fd9cf65324
g/c the 'see foo(X)' xrefs; this info is automatically generated
...
into MAKEDEV(8)
2003-10-26 21:21:50 +00:00
b1210ba8ee
style nits - use / re / instead of "re" for constant REs
2003-10-26 13:40:46 +00:00
706fa97ddd
As a temporary workaround, use "ln -sf" to be compatible with the
...
checks in distrib/common/makedev2spec.awk, which insists on "-sf"
usage (which is arbuably a bug, and should be looked at more closely).
2003-10-26 12:42:55 +00:00
f85d2d1c14
Use ${HOST_SH} instead of `sh'.
...
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
2003-10-26 07:25:33 +00:00
b9e3ec284d
Add the -T etc_pkg arg back to the MAKEDEV install.
2003-10-25 03:55:26 +00:00
3b77895e3d
adjust the device descriptions for better MAKEDEV(8) manpage output
...
note PF is not in tree (for the manpage)
2003-10-24 23:39:42 +00:00
ebbe98fcaf
Now that MAKEDEV is generated, just do an ordinary ${INSTALL_FILE} instead
...
of going back to the source dir (and losing) with ${ETC_INSTALL_FILE}
2003-10-24 22:39:51 +00:00
1b00681156
switch over to unified MAKEDEV
2003-10-24 20:12:04 +00:00
dd2276a2ee
make friendlier to objdir builds; now expect the caller to set ETCDIR
...
to the directory with src/etc; top of kernel sources is assumed
to be ETCDIR/../sys
fix error message for case when platform MAKEDEV.conf is not found
2003-10-24 19:57:36 +00:00
930959c6c0
fix floppy & ramdisk targets
2003-10-24 11:05:23 +00:00
9e9c552bb7
g/c SCSI-related entries
2003-10-24 10:26:44 +00:00
b2607ae4cb
make 'sd' optional
2003-10-24 10:25:08 +00:00
6108862993
fix pasto in pty target
2003-10-24 08:41:11 +00:00
3b5469b94c
fix various mistakes, such as using hardcoded majors or typos/pastos
...
add some more necessary device entries
introduce makedisk_minimal() and use it to create the CD-ROM & md entries;
this procedure only creates 'a' and RAW_PART device entries
remove pf from 'all' target - it's not part of tree, so shouldn't be
created by default
2003-10-24 08:29:57 +00:00
53d9446257
fix handling of ARM ports' majors file
...
fix handling of sbmips majors - it uses the evbmips majors
fetch information about platform RAW_PART, and make it available
to MAKEDEV.tmpl
2003-10-24 08:27:26 +00:00
1eeb241e42
sync with reality, put back some entries mistakely omitted
...
in the initial conversion from MD MAKEDEV
2003-10-24 08:20:26 +00:00
72bc77e103
No INSTALL kernel for ofppc.
2003-10-24 05:01:39 +00:00
7234f6fb3c
don't put GENERIC into BUILD_KERNELS
2003-10-22 20:40:42 +00:00
a9b5015c6d
fix bug in pty target (pasto from some other port)
2003-10-22 20:22:26 +00:00
c5808c177b
no dmoverio either
2003-10-22 17:13:50 +00:00
bc7edb6f2d
add stic0 to 'all' (used to be created in alpha 'wscons' target)
2003-10-22 17:09:50 +00:00
0f5caa8622
no apm
2003-10-22 17:08:50 +00:00
ed841056c7
no USB/openfirm on acorn32, remove from lists
...
put back some stuff which was in the original MAKEDEV lists
2003-10-20 17:56:35 +00:00
4c5a46429b
use tty0 instead of com0
2003-10-20 16:42:13 +00:00
520acde2ae
com0/com1 is exactly tty00/tty01, so g/c them from the list
2003-10-20 16:41:39 +00:00
836389dfbc
Supply the usual default setting of $commmand. Omission pointed out by
...
Launey Thomas in private mail.
2003-10-20 16:09:15 +00:00
b5aee30a01
set fsck_flags=-p in /etc/defaults/rc.conf instead of checking if it is
...
empty in /etc/rc.d/fsck. From Bernd Ernesti.
2003-10-20 15:02:15 +00:00
fbdef6175b
remove entry for clockctl; that is created in the MI 'all' target
2003-10-19 19:08:59 +00:00
7a46124ea4
determine the platform number of disk partitions by looking
...
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
cf58aa2b57
remove copyright notice accidentaly carried over from the hp300
...
MAKEDEV script
2003-10-19 18:50:35 +00:00
c852a48a4f
g/c audio0-3 (created by target 'audio')
...
g/c wscons-related devices (all created by target 'wscons')
2003-10-19 17:32:13 +00:00
3d2b1548ac
g/c audio0-3 (created by target 'audio')
...
g/c duplicate ttyv0 entry
2003-10-19 17:30:35 +00:00
808373beb6
use target 'wscons' to create wscons-related devices; this creates
...
also some additional control devices besides the terminal devices, which
are needed for full operation
2003-10-19 17:29:08 +00:00
54bd322b10
no need to duplicate creation of wskbd/wsmouse - target 'wscons'
...
creates these
2003-10-19 17:26:24 +00:00
7822738b47
use 'audio' target to create audio devices, instead of creating
...
/dev/audio0-3; 'audio' makes some additional device files which are
necessary for full operation
2003-10-19 17:24:14 +00:00
46bdb9f87e
target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
...
the files again
2003-10-19 17:22:42 +00:00
7c7f293c24
add platform MAKEDEV config file for unified MAKEDEV, based on info
...
from platform MAKEDEV script
2003-10-19 17:06:30 +00:00
663be81e89
Allow for a syntax extension for "ntp.conf" with ntp 4.2.0.
2003-10-19 13:31:28 +00:00
b703c0fa68
Use "$command", instead of hard-coded "ntpdate", so that the user can
...
override the path using the usual mechanisms.
2003-10-19 13:23:57 +00:00
a5e3bdad73
Add ibmnws {cat,html,man}8.
2003-10-19 09:08:40 +00:00
14573b928a
Add ibmnws specific files. (XXX someone should checkout MAKEDEV and make
...
it complies with how MAKEDEV is done now).
2003-10-19 03:36:45 +00:00
82729ccc95
Really remove ed0 and ed1
2003-10-18 23:23:43 +00:00
4480d87326
Fix iso-image support.
2003-10-18 03:00:05 +00:00
1af201c35f
g/c ed0/ed1 nodes, the hardware is not present on amd64
2003-10-17 19:22:58 +00:00
ad4acc4abb
allow also tty[0-9] for serial ports, they are convenient synonyms
...
for tty0[0-9]
as pointed out by David Laight
remove spaces between makedisk_p*() functions, so the output script looks
neater once some of them are filtered out
2003-10-17 19:06:33 +00:00
edf6a76108
improve error checking, and bail out early, instead of looping
...
when filtering the template, leave only the wanted makedisk_p*() routine
in the output
as pointed out by David Laight
also make it mandatory for MACHINE and MACHINE_ARCH to be set in
environment; it would be possible to use use uname -p/-m, but better
to catch possible cross-build mistakes sooner than later
2003-10-17 19:01:49 +00:00
20282f8b2e
change minor of /dev/zero for ARM ports to 12, so that it is same as on other
...
ports; follows the kernel change
2003-10-17 17:56:28 +00:00
89159c0540
minor KNF
2003-10-15 21:40:49 +00:00
401cc27682
read the MD MAKEDEV.conf file and appropriately massage the template
...
contents; outputs fully functional MAKEDEV script now
2003-10-15 19:43:00 +00:00
db5fa0cba5
add MI 'all' target - this calls MD 'all_md' and then creates miscellaneous
...
devices supported on all plaforms
and MI 'init' target, which just calls 'all'; this is used if platform
doesn't define it's own 'init' target
2003-10-15 19:16:01 +00:00
7126da0813
MD part of unified MAKEDEV
...
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
e2ba1d7082
Allow overrides via fsck_flags
2003-10-15 17:38:04 +00:00
5351b51128
the main parts of new unified MAKEDEV framework - MAKEDEV template
...
and script for generating the MD MAKEDEV
this is work in progress, some parts are still missing
2003-10-13 09:37:45 +00:00
d8eef4e074
Allow an IPv6 default route to be set from /etc/mygate6 or $defaultroute6.
...
Approved by itojun@.
2003-10-12 09:50:05 +00:00
2d42eb283b
reassing majors for crypto and pf to use the newly defined MI major range
2003-10-10 22:47:10 +00:00
e38ba7f567
add manual section 8 directory entries for evbsh5
2003-10-04 13:40:32 +00:00
5470a1ba9d
g/c empty device groups
2003-10-04 13:15:37 +00:00
faaca95782
remove 'cbq' from the list of supported special devices
2003-10-04 12:13:10 +00:00
5c2824bce4
Revert 'console' back to /dev/console (from /dev/constty)
2003-10-04 07:41:11 +00:00
e5217087d8
Change 'console' login to use /dev/constty so that its output isn't
...
stolen by code that requests system messages using TIOCCONS.
2003-10-03 14:54:20 +00:00
fca3294820
Add a /dev/constty == /dev/console but with minor 1.
...
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
74f5f0da45
Redirect stderr as well as stdout in run_calendar (calendar -a)
2003-10-01 05:34:50 +00:00
6a61a211cf
Suppress output when running security.local if it produces no output.
...
/etc/security should produce no output (and thus suppress the report)
when nothing is wrong.
While we're here, use printf instead of two echos, like the rest of
the script.
2003-10-01 04:29:03 +00:00
f32195ffa6
turn off calendar -a by default and mention why.
2003-09-30 00:23:23 +00:00
fdc3c14ea7
Default to the public servers from the ntp public pool project.
...
The servers will be dynamically assigned on a round-robin basis from
a list of volunteers.
Fix provided by Wolfgang Rupprecht in PR 22416
2003-09-24 11:36:31 +00:00
964c040962
add ./usr/X11R6/lib/modules/extensions
2003-09-23 23:07:35 +00:00
448afe509a
add wscons support to amiga mouse
2003-09-22 18:17:30 +00:00
dd0c7f2f44
Get rid of "$highpartoffset" baggage and use fill 16-number ranges for
...
sd,fd,wd, etc devices. Fixes problems with disk-style devices greater
than unit 0.
Thanks to Charles Hannum for clue-stick.
2003-09-22 04:25:16 +00:00
12cd483962
add isdn telephony dialout devices
2003-09-19 11:11:37 +00:00
9398373099
add ./usr/X11R6/include/X11/pixmaps
2003-09-14 06:39:11 +00:00
6869cb17c5
add ./usr/X11R6/share/examples/ssh-askpass
2003-09-14 06:11:40 +00:00
d5157aa5fd
Add /usr/X11R6/* and /etc/{X11,fonts}
2003-09-12 02:16:45 +00:00
ea949da1c7
Add a knob to turn off automatic configuration (via rc.d) of
...
non-auto-configured (via kernel) raid devices. oster says ok.
2003-09-10 14:50:19 +00:00
48fc13b7c2
dd icmp6 as alias
2003-09-08 21:02:55 +00:00
fc3574d3bf
Correctly fix pty majors
2003-09-05 17:11:30 +00:00
35bb292640
Put back port specific majors for ptys
2003-09-05 17:02:52 +00:00
d671884ac3
pty (pts) is major 4, not 6
2003-09-05 03:10:36 +00:00
d1b485c800
Now that we have nuked /sys, change the cdpath to contain /usr/src/sys
...
rather than /sys.
2003-09-02 18:39:27 +00:00
d1c665c08e
Add UTF-8 ctype locale support for Korean.
...
From Min Sik Kim <minskim bawi org>. tshiozak@ ok.
2003-09-02 09:30:31 +00:00
1279eb3872
fix typo in previous, where "pty*" had been changed to "ty*". (hi dsl@ !)
2003-09-01 08:19:57 +00:00
42efd94df9
add back st* creation, which was accidentally removed in rev 1.32. (hi dsl@ !)
...
this should fix arc autobuild
2003-09-01 08:10:19 +00:00
818622e67a
Change the way pseudo tty devices are generated in order to avoid
...
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
d3ab92da6d
Fix ttyEcfg/ttyEstat confusion.
2003-08-25 20:40:25 +00:00
dfdf058a44
Add comment for /dev/crypto.
2003-08-23 23:14:35 +00:00
a276117721
Optimise DISTRIBUTION_DONE= KERNELS_DONE= nbmake snapshot
...
- If DISTRIBUTION_DONE is defined, don't add the 'root' directory to METALOG.
(maybe install -M shouldn't write to the METALOG file if it doesn't install
the file either)
- Don't re-compress the kernels if the compressed file is newer than the
kernel.
Useful if all you want to do is rebuild the ramdisk image.
2003-08-22 19:03:03 +00:00
777a312e0f
ipnat needs to be before SERVERS - one may need NAT for servers to work
...
(eg, ntpdate).
2003-08-22 08:43:26 +00:00
4440262659
create /dev/crypto
2003-08-22 05:06:22 +00:00
f48b602669
Don't use depricated "-f" option to mixerctl(1). Patch supplied by
...
Bruce J.A. Nourish in PR misc/22524.
2003-08-18 13:04:10 +00:00
efc0a23c7d
Add lpt (for explora) as char 20.
...
This major number is unused in macppc.
2003-08-17 11:06:46 +00:00
499d0081dd
Add radio(4) devices.
2003-08-08 16:41:41 +00:00
ef6f82b46b
Remove nntp line -- it refers to a non-existing daemon.
...
Closes PR 22388, from Nate Hill.
2003-08-07 06:44:29 +00:00
47a6970dac
Put boot32,ffa into the release tree so people can use it for booting ramdisk
...
kernels.
2003-08-02 18:02:36 +00:00
b51dfb6979
Add some MI SCSI devices.
2003-08-01 02:17:48 +00:00
3f14c71f75
reserve cdev major # for PF. ok'ed by technical-exec
2003-07-27 14:17:57 +00:00
6d7e3e1b0d
Add "*,v" to the list of scratch files to skip.
...
Suggested by Johnny Lam / Alistair Crooks
2003-07-26 05:13:47 +00:00
cf25ac5ebd
Add /usr/include/crypto for userspace API to opencrypto framework.
2003-07-25 22:59:58 +00:00
f4f8071598
add new g++ dirs
2003-07-25 16:55:15 +00:00
7264d9073d
add new locales: bg_BG.CP1251 el_GR.ISO8859-7 hy_AM.ARMSCII-8 lt_LT.ISO8859-13
2003-07-21 17:30:33 +00:00
f134f3dc38
Add MKUNPRIVED; if not no has the same semantics as if UNPRIVED was defined.
...
Replace defined(UNPRIVED) tests with ${MKUNPRIVED} != "no"
Add MKUPDATE; if not no has the same semantics as if UPDATE was defined.
Replace defined(UPDATE) tests with ${MKUPDATE} != "no"
Improve documentation for these and other make flags.
2003-07-18 08:26:01 +00:00
ccf314363b
Move the libmilter headers to where they belong.
2003-07-10 13:07:24 +00:00
001c68bd94
Rename a large chunk of the make(1) variables which refer to a
...
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
2003-07-10 10:33:58 +00:00
f91480b342
Replace some spaces with tab and remove trailing spaces.
2003-07-08 03:32:00 +00:00
22e98152fc
Add a few more services showing up regularly in my IP filter logs.
2003-07-08 02:48:37 +00:00
933836753e
Add port 8080 (http-alt) to the "ports commonly found in security logs"
...
section.
2003-07-07 01:26:15 +00:00
5bc691beb5
Removed references to devices and special targets not actually supported.
2003-07-04 16:34:41 +00:00
8026bccd2c
Revert previous; the "return" if rc.subr had already loaded had issues
...
in some circumstances where run_rc_script()'s sourcing of an rc.d file
which then sourced rc.subr, the `optimisation' in rc.subr to "return as
we're already loaded" would finish more than just the inner-most sourcing.
I haven't tracked down the exact issue, but removing the `optimisation'
fixes the problem I noticed in starting up certain rc.d scripts, and
may fix [bin/22053] as well.
2003-07-04 14:14:10 +00:00
9b040021ec
Make /usr/include/milter for sendmail's milter headers
2003-07-04 04:54:40 +00:00
598ecee001
Add /usr/share/locale/ro{,/LC_MESSAGES}.
2003-07-03 15:17:17 +00:00
7d3ab77f7d
identd can now run as nobody.
2003-06-27 18:40:06 +00:00
1d910e61f7
Citrus iconv support(5)
...
add iconv data files. now ready to use iconv stuffs.
TODO:
- manpages.
- enrich mapper/esdb.
2003-06-27 08:39:59 +00:00
b0f080676b
Support "multicastclient" directives in ntp.conf.
...
Based on [bin/17930] from Stoned Elipot.
2003-06-27 07:22:36 +00:00
151e9a3180
If _rc_subr_loaded=true, "return" immediately, otherwise set that var
...
and continue as normal.
Gains ~ 2 seconds on 110 runs of ". rc.subr" on a shark.
Suggested by Andrew Cagney in [bin/18400]
2003-06-27 05:01:21 +00:00
e85d25db42
run_rc_command(): when checking if ${command} exists before executing it,
...
be sure to check under ${name_chroot} (if set).
Fix from Ed Ravin in [bin/18523]
2003-06-27 04:06:01 +00:00
71a2c91273
Add some dirs to be used by groff-1.19 (coming soon).
2003-06-26 09:24:25 +00:00
78e800a41c
Ifwatchd now uses syslog, so require syslogd.
2003-06-24 09:32:46 +00:00
eaaa8e8699
Invoke makeobsolete with ${HOST_SH} and pass in ${MAKE}.
...
Fixes FreeBSD cross-build problem noted by Valeriy E. Ushakov <uwe@>
2003-06-08 23:49:21 +00:00
9af716fd9a
Make smbfs work on NetBSD/acorn32 ! it missed an entry in majors.acorn32
...
and an entry in the MAKEDEV
2003-06-08 20:12:33 +00:00
5b0bcd4163
Add "kamanda" 10081/udp for Amanda with Kerberos per PR 21756
2003-06-03 16:59:48 +00:00
b224530c28
Use more concise shell syntax:
...
1. for i in $* -> for i
2. foo=$* -> foo="$@"
2003-06-03 14:00:45 +00:00
23ccfa6b2c
Add nsmb support.
2003-06-01 20:25:02 +00:00
846d276e6f
Don't build a big-endian image on platforms which don't run big-endian.
2003-05-26 15:46:48 +00:00
6087671da1
* Always include <bsd.endian.mk>, and include it much earlier so that
...
it's available for the MD etc.${MACHINE}/Makefile.inc
* Set PWD_MKDB_ENDIAN to the cap_mkdb(8) endian flag, rather than
overriding TARGET_ENDIANNESS.
2003-05-18 08:28:05 +00:00
5b143c1fff
No point in a qms device if there is no qms driver.
2003-05-15 19:05:28 +00:00
b0b2ab2055
Not much point in creating a device node for a driver that doesn't exist
...
(qms in this case).
2003-05-15 19:01:38 +00:00
804526377b
Remove device nodes for obsolete olms and omms drivers.
...
Except for i386, the driver never existed for that port anyway...
2003-05-15 13:18:05 +00:00
6409af4cfe
use find_file_in_dirlist() (instead of private version) when searching
...
for the ssh moduli file
2003-05-15 05:25:24 +00:00
9f99c49364
Remove kvm.db, reminded by atatat.
2003-05-14 16:36:22 +00:00
003c4a9e6c
Add /dev/icp*.
2003-05-13 15:44:32 +00:00
35bfe45330
Ensure that the exit status in do_obsolete() is correctly determined.
...
Problem introduced in previous, and noticed by Rob Quinn in private email.
2003-05-13 02:41:27 +00:00
91b1808f8e
Remove kvm_mkdb, it's not used anymore.
2003-05-11 18:17:30 +00:00
db48ae2bcb
reverse sort all of the obsolete lists before attempting to removing,
...
incase an obsolete directory appeared in a setfile whose filename
alphasorted before another setfile with obsolete "children" of that directory.
fixes [install/21348] from Rob Quinn.
2003-05-10 10:20:31 +00:00
528dbaae90
Remove ksyms before mknod ksyms.
2003-05-09 00:13:50 +00:00
b8984d0017
etc/mail/aliases.db is optional. From [misc/18536] by Jeremy Reed.
2003-05-09 00:10:52 +00:00
e98429f32c
fix ugen issue from latest shell changes that treat numeric constants
...
differently depending on their prefix.
2003-05-07 13:41:34 +00:00
cd3c6906c0
Add wsfont support. Addresses PR#18388.
2003-05-04 01:18:56 +00:00
8595228212
identd(8) must run as "root" to use TCPCTL_IDENT via sysctl(3). This fixes
...
PR bin/21261 by myself.
2003-05-02 08:51:08 +00:00
e50c267861
Add arc and cobalt html4 subdirs.
2003-04-30 09:40:43 +00:00
14ec4984a1
etc/powerd/** is optional
2003-04-30 09:05:56 +00:00
24a7d37d49
Create man4 and cat4 directories for arc and cobalt.
2003-04-30 09:01:41 +00:00
ce0bf5c28d
Add ksyms to "std" devices.
2003-04-27 13:15:28 +00:00
c42e1fac66
Management, not managment. Mostly from jmc@openbsd.
2003-04-26 22:07:12 +00:00
41f90fa6c0
x86_64 -> amd64
2003-04-26 21:59:43 +00:00
043f21d9ea
x86_64 -> amd64
2003-04-26 19:14:17 +00:00
0945a6df17
x86_64 -> amd64
2003-04-26 19:02:50 +00:00
a6c2c6c171
Add more descriptive header comments for default dotfiles.
...
Text based on suggestions by Igor Sobrado in PR misc/21223
2003-04-24 01:02:26 +00:00
66adc5d938
Add a default .logout file.
...
Suggested by Igor Sobrado in PR misc/21223
2003-04-24 01:01:39 +00:00
c2c36bf309
Make a bunch of names mindlessly consistent with the one true way
...
(e.g., massbus->MASSBUS, unibus->UNIBUS, and similar for some device
names.)
Proposed by Igor Sobrado in PR port-vax/21183 -- but he sent in a
patch that he'd obviously cut and pasted from an xterm or something
that similarly destroyed all the tab characters so I had to re-do it
by hand.
2003-04-23 23:25:02 +00:00
953de79cde
Add a reset_button script.
2003-04-20 20:55:39 +00:00
66baae11eb
Add sysmon.
2003-04-20 17:03:32 +00:00
71dd417eff
{cat4,html4,man4}/arm32 not needed any longer.
2003-04-18 14:54:57 +00:00
860e1121cf
Add /dev/power (part of sysmon).
2003-04-18 06:00:46 +00:00
8332742ea3
Add powerd rc.d script and configuration scripts.
2003-04-18 05:42:04 +00:00
3449ccac0f
Install powerd(8) scripts when installing etc files.
2003-04-18 05:41:47 +00:00
e45c396415
Add a default power_button script for powerd(8).
2003-04-18 05:40:06 +00:00
324cf4c7d6
Add /etc/rc.d/powerd.
2003-04-18 05:38:40 +00:00
7fcb5daedb
Add defaults for powerd(8).
2003-04-18 05:21:20 +00:00
f0150db8f2
Add an rc script for powerd(8).
2003-04-18 05:19:35 +00:00
7591178b00
Create /etc/powerd and /etc/powerd/scripts.
2003-04-18 05:15:29 +00:00
f72721d957
Add man4 acorn32 dirs.
2003-04-17 22:23:47 +00:00
c3065b2a37
Create two ptys in the init case. You never know, you might need them
...
(sysinst does).
2003-04-17 18:51:23 +00:00
750b5b8327
Add an 'init' target, that creates the device nodes in the case where
...
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
4b9534ebf5
Remove quadmouse comment without matching code; remove unused qms and mouse-qms targets.
2003-04-16 10:02:43 +00:00
957075b57b
Change ipsec.conf not to be world-readable and nodiff, so we don't expose keys
...
if they happen to be in that file. Also add /etc/racoon stuff.
2003-04-16 03:16:38 +00:00
a1e70625a5
remove superfluous "uname=root gname=wheel" from etc/postfix/** entries
2003-04-15 06:21:51 +00:00
8c98a58428
Make it "Risc PC" instead of RiscPC.
...
Noted by Ben Harris who pointed at
http://www.riscos.com/faqs/spelling_and_pronunciation.htm .
2003-04-14 11:57:10 +00:00
c08f5994be
Correct casing of RiscPC. From Igor Sobrado in PR 21144.
2003-04-14 06:32:02 +00:00
a20ec90fe2
Uppercase ITE. Addresses PRs 21138 to 21141 by Igor Sobrado.
2003-04-14 05:45:40 +00:00
0db44986d2
Add slovak language libc message catalog.
2003-04-14 05:21:47 +00:00
8fee00a553
... ca/LC_MESSAGES is not needed.
2003-04-13 09:54:41 +00:00
4f7db6cd44
Finally add complete support for Catalan (ca_ES, ca) LC_CTYPE and libc
...
catalog messages.
Thanks to salo for letting me know what was missing.
2003-04-13 09:48:18 +00:00
b5154d96e4
Build a selection of install kernels.
2003-04-10 02:22:06 +00:00
33b8c350b6
Add a Catalan libc message catalog file (plus everything else needed to
...
track the file). Closes my own PR lib/19498.
2003-04-09 20:17:06 +00:00
cb606faa7a
add :ht: to the Pc entry so wscons consoles will have proper tab
...
handling (i.e. not oxtabs.)
From Geoff C. Wing in PR misc/21006
2003-04-04 16:43:38 +00:00
772fa9214a
add /usr/share/examples/smbfs/dot.nsmbrc
2003-04-04 07:53:09 +00:00
f334171ccc
Variable substitution happens at trap installation time, not at trap
...
execution time - so it used to print "Using default configuration of
/etc/passwd".
2003-04-03 11:25:10 +00:00
4beb2262be
Capitalize the word "if".
2003-04-02 18:17:27 +00:00
a7627e5f06
Reorganize/clarify the configuration checks (and subsequent messages)
...
that might block startup, and be more permissive in general about
allowing the daemons to start.
Add some descriptive comments to the top of the smmsp script that
describe the purpose of the process.
2003-04-02 18:00:13 +00:00
8deab10532
Add more style points to a few places in the do_sendmail section, and
...
teach it how to install sample config files so that people aren't as
lost.
2003-04-02 17:56:46 +00:00
c85da95565
For consistency and simplicity, move the default location for cron logs
...
from /var/cron/log to /var/log/cron
2003-04-02 14:38:26 +00:00
jhawk