56db5baced
print slot number as decimal, not hex
1996-06-05 01:32:00 +00:00
666c7f6fd4
interrupt counters for TurboChannel systems.
1996-06-05 00:30:48 +00:00
78937ab274
change > to >= in #endif comment, too.
1996-06-04 20:01:58 +00:00
6110ea9366
#ifdef tty_attach() with PCVT_NETBSD >= 120 (rather than just >),
...
since tty_attach() is now in the 1.2 release.
1996-06-04 19:53:28 +00:00
abc294c9d9
don't tty_attach() the mouse emulator tty.
1996-06-04 19:47:51 +00:00
2d03e599c7
don't depend on being able to read the IMR. Apparently, it doesn't
...
work (as documented in the DEC 3000/[3-9]00 System Programmer's Manual)
in some of the older 3000/500 systems.
1996-06-04 19:02:16 +00:00
6959d64eeb
Some more constants from Bob Nestor--MacTV ADB works, now.
1996-06-04 03:04:49 +00:00
3dfb6ab8c0
Code the residual computation a bit differently.
1996-06-03 23:48:41 +00:00
b58401e04e
Not needed. This was identical to the VOYAGER config.
1996-06-03 22:50:07 +00:00
8477987501
Fixed lots and lots and lots of -Wall compiler warnings.
1996-06-03 22:44:53 +00:00
f2a8347cc4
Fixed -Wall compiler warnings.
...
Implemented a setsoftintr() function.
1996-06-03 22:44:36 +00:00
bfe01da7b5
Tidied up the prototype declarations.
1996-06-03 22:41:14 +00:00
4732cc6c39
Make sure that the ethernet address has been set correctly before
...
attaching the interface to the network code.
1996-06-03 22:39:12 +00:00
45842a3af6
Merged in the latest changes that have been mode to the isa lpt driver.
...
Merged in the latest plip code from the pc532 port.
1996-06-03 22:36:23 +00:00
0217e55278
Fixed the softnet interrupt code to properly use netisr.
1996-06-03 22:33:51 +00:00
e2391b47fd
Merged in the latest changes that have been made to the isa com driver.
1996-06-03 22:30:36 +00:00
f941f8cdb9
Fixed -Wall compiler warnings.
1996-06-03 22:20:32 +00:00
1c9f0501fc
Don't complain about a drive type of zero, just treat it as no drive
...
present.
1996-06-03 22:19:21 +00:00
59e4127d96
Use the sync information in the mode definition to set the VIDC sync
...
polarity.
1996-06-03 22:14:56 +00:00
2f6e37b679
Fixed -Wall compiler warnings.
1996-06-03 22:11:34 +00:00
d4b96c659d
Fixed -Wall compiler warnings introduced when fixing the vt220 printing
...
bug.
1996-06-03 22:08:37 +00:00
a2a08dd859
Removed the old QUADMOUSE_* ioctl names. Everything now uses the
...
generic mouse ones.
1996-06-03 22:07:39 +00:00
aa4be90f73
General code format tidy up.
...
Added missing function prototypes.
1996-06-03 22:04:40 +00:00
0ba929925d
Added proper definitions of quadrature mouse button register.
1996-06-03 22:03:36 +00:00
258f83367c
Added setsoftintr() prototype.
1996-06-03 22:00:50 +00:00
0b265889c6
RCS Id police.
1996-06-03 21:58:25 +00:00
515759c222
Added PLIP soft interrupt.
1996-06-03 21:57:52 +00:00
10d9fbd5fe
RCS Id police.
1996-06-03 21:55:46 +00:00
89711a59f0
Fixed -Wall compiler warnings.
1996-06-03 21:53:33 +00:00
17582aa655
Removed some dead code from cpu_exit().
...
Fixed -Wall compiler warnings.
1996-06-03 21:46:15 +00:00
7d3a5033a5
Use special versions of the IRQdisable and IRQenable macros that
...
keep FIQ's active.
1996-06-03 21:43:06 +00:00
2d9f11e999
Add visibale debugging info for the RC7500 board.
1996-06-03 21:41:09 +00:00
2a56b05b3d
Implemented cache and tlb flush functions for the StrongARM.
...
RCS Id police.
1996-06-03 21:38:05 +00:00
8251f6e1f7
Fixed copyright message.
1996-06-03 21:36:14 +00:00
6da55f03ee
RCS Id police.
1996-06-03 21:35:10 +00:00
6ecba1cbe0
Added extra diagnostic information that can be printed when the ARM700
...
prefetch abort bug occurs.
Fixed -Wall compiler warnings.
1996-06-03 21:32:11 +00:00
ff542922fa
getdevice() now defaults to returning the a partition if no partition
...
is specified in the string.
Fixed -Wall compiler warnings.
1996-06-03 21:28:59 +00:00
bd72d43fdc
Major code clean up. Now satisfies the source code style guide.
1996-06-03 21:27:21 +00:00
5a66df3d3d
RCS Id police.
1996-06-03 21:21:29 +00:00
c6dd609e7f
gross hack to get around the fact that there are currently devices with
...
common back-ends that live on multiple very-different busses (e.g. PCI and
TC), which need bus-specific DMA mapping support. As a nice side effect,
this will allow the especially nasty (vtophys(va) | 0x40000000) expressions
to go away in favor of less nasty bus-specific function calls.
1996-06-03 20:18:48 +00:00
e038a84b34
add "le* at pci?", because it compiles and may actually work.
1996-06-03 20:10:52 +00:00
729d7a8aa8
only do tty_attach() for first tty of each chip; that's the only real tty.
1996-06-03 19:43:31 +00:00
7aaddee417
#define GRFIOCBLANK_LIVE and GRFIOCBLANK_DARK in grfioctl.h to make absolutely
...
clear which switches the video signal on and which off.
Make all grf_??.c (which supported it) use the same polarity of the test.
While being here, use a > test instead of implicit != to make it extensible
to darker than dark values for power managment systems.
1996-06-03 18:55:08 +00:00
afe080291e
fix pasto: s/NETISR_CCITT/NETISR_PPP/ at the appropriate place in
...
netintr(). From Matt Thomas <matt@lkg.dec.com>.
1996-06-03 18:32:37 +00:00
1530e15480
Don't get fooled by the CyberSCSI MK I, which uses the same man/prod id
...
as the Fastlane Z3, but is different enough to let the kernel crash.
Closes PR #2492 by Matthias Scheler. [thanks also to Ralph Schmidt for
confirmation of the patch]
1996-06-03 17:07:20 +00:00
d9953b15c4
Minor cosmetic cleanup left over from reverting interrupt handlers
1996-06-01 06:10:34 +00:00
701205b00d
Add tty_attach() as appropriate (for pstat -t)
1996-06-01 00:13:39 +00:00
460d3403be
Initialize video parameters if the board is not yet running. Useful if
...
the cg3 is not the console.
1996-05-31 09:59:22 +00:00
d4b462666e
if PCVT_NETBSD > 120, do tty_attach() calls so that pstat -t will work.
...
If these changes are pulled up to the 1.2 release branch, they should
be changed so that they are included if PCVT_NETBSD >= 120.
1996-05-31 00:03:59 +00:00
311886cbbe
add call to tty_attach() so pstat -t will work with pccons ttys.
1996-05-30 23:59:11 +00:00
99a50a5e0d
now that the bug has been fixed, we can go back to using the
...
Alpha-optimized in_cksum().
1996-05-30 23:18:14 +00:00
ea82d613ab
Fix from Matt Thomas to fix problem where packets like
...
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x01 would be checksummed
incorrectly: rather than adding two 32-bit quantities together to
sum a quadword (which was losing a carry bit), add as four 16-bit
quantities.
1996-05-30 23:08:36 +00:00
a6539cd434
add options LKM, INSECURE
1996-05-30 22:36:49 +00:00
00a630739d
don't use pcvt any longer
1996-05-30 22:35:46 +00:00
a8deff302c
Clamp synch-transfer parameters at our maximum values on device-initiated
...
synch negotiation.
1996-05-30 22:19:10 +00:00
4c4c6e7b5f
Pull INSTALL into the trunk.
1996-05-30 20:50:48 +00:00
6e6fc14f32
add tty_attach() calls where appropriate
1996-05-30 18:44:30 +00:00
e81bea0de0
Add loadkmap
1996-05-30 13:44:36 +00:00
0b59a91269
Add missing spl(x). (Jason Thorpe)
1996-05-30 13:41:58 +00:00
601c0013e0
Fix the third LBA extraction from a 6 byte SCSI command that I missed.
1996-05-30 03:15:07 +00:00
c393eae7c5
event_var.h changed location.
1996-05-30 01:40:07 +00:00
9a9cf8c3f5
Put back a `#if defined(SUN4M)' for now.
1996-05-30 00:57:35 +00:00
e86275a0b6
Some slight optimizations.
1996-05-30 00:02:09 +00:00
f7dcef06d4
add missing splx(). From Jason Thorpe
1996-05-29 22:24:47 +00:00
b3666a87b4
Swiatch to `sys/dev/sun/event*'.
1996-05-29 21:57:51 +00:00
3d1e64415a
Switch to `sys/dev/sun/event.c'.
1996-05-29 21:56:38 +00:00
f9f5f23ee3
We really need a ring buffer for every unit.
...
Eliminate extraneous ttyalloc() calls.
1996-05-29 21:45:28 +00:00
4899447ffc
Add missing splx(), per Jason.
1996-05-29 21:08:28 +00:00
57e61589e7
Fix two cases of handling stale page table information:
...
1. when reading the referenced/modified bits the TLB entry must be flushed
before reading the in-core version.
2. when wrapping up an entire segment in pmap_page_protect(), flush the PTPs
from the TLB to prevent a table-walking operation to pick up stale - or
possibly bogus - PTEs.
(hopefully I'll get a few of my hairs back now..)
1996-05-29 20:58:38 +00:00
b042da1f56
fixed reboot problem on Xellent30.
1996-05-29 17:19:07 +00:00
7c5b284636
added missing splx(s). pointed out by thorpej.
1996-05-29 17:03:41 +00:00
cac1b831e9
- Simplify writes in sbc_drq_intr().
...
- When finished writing, if the SCSI bus has BSY asserted, write another
byte to the SBC to ensure we get an interrupt.
- Unflag SCSI interrupts on the VIA whenever we clear the interrupts
on the SBC itself.
1996-05-29 14:26:33 +00:00
5d8d243a6e
Add UCONSOLE option.
1996-05-29 12:28:06 +00:00
fe55416706
Fix autoconfiguration stuff to more closely match the alpha - primarily
...
the IOASIC attached devices. The DS3100 will now configure properly.
Fix the DS5000/25 IOASIC table entry for the RTC so the RTC interrupts
get enabled.
Fix up a moved include file.
1996-05-29 06:29:02 +00:00
d8824f1a84
Fix autoconfig stuff to more closely match the alpha. The DS3100 will now
...
configure properly. Also fix devices with TurboChannel and mainbus
attachments so they will work if no TurboChannel was configured.
Fix clock.c for a missing variable if not including NTP support.
Also remove some extraneous includes files or use the right ones.
1996-05-29 06:25:01 +00:00
038bd4a782
Fix autoconfig stuff to match the alpha. The DS3100 will now
...
configure properly.
1996-05-29 06:19:49 +00:00
de1b9b4230
Fix autoconfiguration stuff to match the alpha. The DS3100 will now
...
configure properly. Also fix devices with TurboChannel and mainbus
attachments so they will work if no TurboChannel was configured.
Fix a panic when the dtop keyboard handler receieves a character
before the device has been opened.
1996-05-29 06:15:40 +00:00
9d8526a68d
Use the MI LANCE drivers - the pmax-specific one no longer compiles.
1996-05-29 06:05:05 +00:00
a2d094fb48
Fixes to make kernel compile: HZ is required to be defined and CPU_R3000
...
is needed to include R3000 support. Also change the le0 to le* for the
3100 LANCE so it configures properly.
1996-05-29 06:01:13 +00:00
e35aa10df8
switch to generic boot
1996-05-29 05:06:21 +00:00
24ac64b87b
fix generic boot code
1996-05-29 05:04:41 +00:00
9f36687189
borrow part of the sparc port's dk_establish to fix generic boot
1996-05-29 05:03:50 +00:00
946f08aa87
note if we are the boot device (for fixing generic boot)
1996-05-29 04:29:46 +00:00
5258929681
detect if we are the boot device (to fix generic kernel)
1996-05-29 04:27:11 +00:00
ac46d3b779
add to fix boot generic problem
1996-05-29 02:32:21 +00:00
e4528e0647
save boot device info from bug/bootblocks
1996-05-29 02:28:30 +00:00
5583238255
impliment ttylist stats based on disk stats.
1996-05-29 02:02:42 +00:00
65d186d8e8
find a couple minor nits from previous change.
1996-05-29 01:58:09 +00:00
6645fec14e
fix off by one error
1996-05-29 01:52:03 +00:00
f057fa41d5
leave room for partition
1996-05-28 19:07:32 +00:00
cd4d6d851b
new kernel call args.
1996-05-28 18:14:24 +00:00
e0923c774b
bug fix: pass address of le to netboot
1996-05-28 18:03:38 +00:00
532b0a8630
fdboot can boot from 512bytes/sector format floppy now.
1996-05-28 17:01:25 +00:00
9a628842cf
fix bootst (sync with sun3 tapeboot)
1996-05-28 15:23:53 +00:00
09e22de574
delete non-working bootst
1996-05-28 15:23:06 +00:00
da573626b4
new bootst (based on sun3 tapeboot)
1996-05-28 15:22:41 +00:00
6ce8e31376
change zsinfo to a zs_softc, and impliment intr counts. mostly from OpenBSD.
1996-05-28 14:06:28 +00:00
08bd090b26
count audio interupts (from OpenBSD).
1996-05-28 13:36:09 +00:00
b7a6989848
NetBSD1_1 -> NetBSD1_2, so use it properly (PR 2475)
1996-05-28 12:28:45 +00:00
9913321bff
CMP_PTE_USER_READ4M: check against PPROT_RWX_RWX; this is the canonical
...
stack protection (saves many excursions into trap.c on window underflows
as was the sole intention of the macro..).
1996-05-27 20:46:39 +00:00
cgd