entering rtentry's for hosts we're not actually communicating
with.
Do this by invoking the ctlinput for the protocol, which is
responsible for validating the ICMP message:
* TCP -- Lookup the connection based on the address/port
pairs in the ICMP message.
* AH/ESP -- Lookup the SA based on the SPI in the ICMP message.
If validation succeeds, ctlinput is responsible for calling
icmp_mtudisc(). icmp_mtudisc() then invokes callbacks registered
by protocols (such as TCP) which want to take some sort of special
action when a path's MTU changes. For TCP, this is where we now
refresh cached routes and re-enter slow-start.
As a side-effect, this fixes the problem where TCP would not be
notified when a path's MTU changed if AH/ESP were being used.
XXX Note, this is only a fix for the IPv4 case. For the IPv6
XXX case, we need to wait for the KAME folks.
Reviewed by sommerfeld@netbsd.org and itojun@netbsd.org.
basis. default: 100pps
set default value for net.inet.tcp.rstratelimit to 0 (disabled),
NOTE: it does not work right for smaller-than-1/hz interval. maybe we should
nuke it, or make it impossible to set smaller-than-1/hz value.
to protocol handlers, based on src/dst (for ip proto #4/41).
see comment in ip_encap.c for details of the problem we have.
there are too many protocol specs for ip proto #4/41.
backward compatibility with MROUTING case is now provided in ip_encap.c.
fix ipip to work with gif (using ip_encap.c). sorry for breakage.
gif now uses ip_encap.c.
introduce stf pseudo interface (implements 6to4, another IPv6-over-IPv4 code
with ip proto #41).
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
Note, we're reusing the previously unused slot for "MTU discovery" (which
was moved to the "net.inet.ip" branch of the sysctl tree quite some time
ago).
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
where one side can think a connection exists, where the other side thinks
the connection was never established.
The original problem was first reported by Ty Sarna in PR #5909. The
original fix I made to the code didn't cover all cases. The problem this
fix addresses was reported by Christoph Badura via private e-mail.
Many thanks to Bill Sommerfeld for helping me to test this code, and
for finding a subtle bug.
- Don't use home-grown queue manipulation. Use <sys/queue.h> instead. The
data structures are a little larger, but we are otherwise wasting the
memory chunk anyway (we're already a 64-byte malloc bucket).
- Fix a bug in the cache-is-full case: if the oldest element removed from
the first non-empty bucket was the only element in the bucket, the
bucket wouldn't be removed from the bucket cache, causing queue corruption
later.
- Optimize the syn cache timers by using PRT timers rather than home-grown
decrement-and-propagate timers.
This code is now a fair bit smaller, and significantly easier to read
and understand.
thorpej