remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
chip-independent clock code. 'clock' has been renamed 'mcclock' 'clock'
has been renamed 'mcclock' (since it's a driver for that particular
clock, and since eventually there may be another clock chip driver),
and now attaches via seperate match/attach functions to both TC and ISA.
This removes a whole lot of #ifdefs...
'cflag' for the console. Normally set to TTYDEF_CFLAG, may be
overridden by machine-dependent console attachment code, as necessary.
(Alpha uses it to set cs8 -parenb.) Files including comvar.h now
need to include <sys/termios.h>, because comconscflag is of type
tcflag_t.
tech-kern (?)), to get the IPL_* and IST_* types. pass the machine-dependent
cookie given at attach time on to sub-devices, so they can use it to access
the interrupt functions properly.
the isa_chipset_tag_t type, and to define or prototype:
isa_attach_hook()
isa_intr_establish()
isa_intr_disestablish()
i.e. the machine-dependent functions to be used my MI ISA code.
Remove prototypes for the latter two functions from this file.
the bus is configured, interrupts are handled, etc. machine-dependent
header (machine/eisa/eisa_machdep.h) defines eisa_chipset_tag_t and
eisa_intr_handle_t types, and the following functions:
eisa_attach_hook()
eisa_maxslots()
eisa_intr_map()
eisa_intr_string()
eisa_intr_establish()
eisa_intr_disestablish()
Don't define the interrupt establish/disestablish functions directly
in terms of the ISA functions any more (on some wacked out systems,
there can be a difference).
* Add an ACB_RESET flag, so that a BUS DEVICE RESET can be queued within the
driver.
* If ACB_ABORT or ACB_RESET is set during reselection, schedule a message and
assert ATN.
* Optimize aic_datain_pio(), aic_dataout_pio() and aicintr() somewhat.
* Schedule a timeout only when we select the target, so that commands can't
time out prematurely.
influence from the old driver (written by Stefan Grefen) and from
an autochanger driver written by the Systems Programming Group at the
University of Utah Computer Science Department (currently residing
in src/sys/arch/hp300/dev/ac.c).
1) If we get an unexpected disconnect, issue a REQUEST SENSE, as recommended
by the SCSI-2 spec. If the target created a contingent allegiance condition,
this will clear it. Also, if it happened while sending a SDTR or WDTR message,
disable negotiation for that target.
2) Since some lame devices still don't deal correctly, make sure we deassert
ATN if our last message out is interrupted. If we get a MESSAGE PARITY ERROR,
we'll reassert ATN anyway. This should ensure that we never have to send a
MESSAGE NO OPERATION.
3) Set AIC_ABORTING only when actually sending a BUS DEVICE RESET or ABORT,
so we get better error detection.
4) Other internal reorganization of no consequence.
christos