as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
This may be done either by embedding newlines in the value,
or by using semicolons to represent line breaks (but not both at once).
* Allow shell quoting insode $ifconfig_xxN variables or /etc/ifconfig.xxN
files. This allows something like ifconfig_wi0="ssid 'my network'; dhcp"
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
XXX: maybe ramdisk kernels should be installed into binary/kernel dir
XXX: as other ports rather than installation dir, and
XXX: kernel config names should be preserved in their filenames.
image is installed properly
- INSTALL_IPAQ should be in BUILD_KERNELS rather than KERNEL_SETS
since it requires ramdisk image by mdsetimage(8) in src/distrib
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.
Should close PR port-sgimips/38962.
private non-installed build infrastructure from sys/rump.
breakdown of commit:
* install relevant headers into /usr/include/rump
* build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern
from src/lib and install as librumpuser and librump, respectively
+ this retains the ability to test a librump build with just the
kernel sources at hand
* move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib
for general consumption, they are not kernel-space dwellers anyway
* build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs
* add chapter 3 manual pages for rump, rumpuser, ukfs and p2k
* build and install userspace kernel file system daemons if MKPUFFS=yes
is spexified
* retire fsconsole for now, it will make a comeback with an actually
implemented version shortly
This is consistent with several other rc.d scripts
and fixes problem with /sbin not in PATH.
(Tested several times for over three weeks, but not all
parts of this code were used by me.)
and create sums for it.
This means all the pieces to do network installation are easily accessible
following a release build (and will also come out of the build servers).
netbsd-GENERIC is in binary/kernel/
pxeboot_ia32.bin is in installation/misc/
miniroot.kmod is in installation/miniroot/
- Make MULTIPROCESSOR mandatory on i386.
Installation changes:
- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.
Build changes:
- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.
Only a sensor is only returning unknown data, all the other ones
match what the BIOS returns.
- Improve comments and add a note for contacting me if the values
returned by drivers are not correct.
btuartd(8) should be named btattach(8) for consistency
with other parts of NetBSD
make btattach(8) a single-use tool for less complexity
device specicific initialisation (from btuart(4)) is carried
out prior to activating the line discipline (in btattach(8)),
which simplifies the API somewhat and means that the user
tool and the kernel do not need to be kept in sync.
btuart(4) driver is much reduced; naming is made consistent
and all tsleep() and delay() are removed to userland
like "cmd: not found" are also redirected.
This should fix a problem reported by Chavdar Ivanov in which
the message "mtree: not found" appears during installation.
already-existing device nodes. This is done by invoking pax with its
current working directory set to an empty temporary directory.
* Add "-t mtree" command line option, to force MAKEDEV to use "mtree
-e -U" to create device nodes. Here are some timings from "MAKEDEV
${method} all" on an i386 system; each method was executed three
times, first in an empty directory, then twice in an already-populated
directory:
-m mknod
4.56 real 1.58 user 1.68 sys
2.96 real 1.37 user 1.48 sys
2.95 real 1.43 user 1.44 sys
-p pax
1.80 real 0.18 user 0.62 sys
2.35 real 0.25 user 0.80 sys
2.38 real 0.24 user 0.82 sys
-t mtree
1.62 real 0.22 user 0.44 sys
0.23 real 0.29 user 0.04 sys
0.24 real 0.28 user 0.05 sys
* If no command line options force a choice, then prefer mtree, pax, or
mknod, in that order of preference.
No objections in tech-userlevel to an earlier version of this change.
"retro" computers, but NetBSD also runs a growing number of rare
and retro add-on cards. With this patch, NetBSD supports the IDEC
Supervision/16, a black&white image capture board for the 16-bit
ISA bus. Approximate date of manufacture: 1991. Total instances
known to be in use throughout the world: one.
Coming soon; isvctl(8), the utility program for capturing 8-bit,
512x480 images at speeds of up to 6 frames per second.
This is so that md code that tries to call makedev altq or fd does not fail
when the file exists. This was reported in port-powerpc, when building /dev.
Now "etcupdate -s /path/to/src" should no longer complain about being
unable to make atf-run.hooks. build.sh passes NETBSDSRCDIR in the
environment, so it used to work even without this include.
* Add a nooutput function to be used instead of redirecting to /dev/null,
because /dev/null might not exist early in the boot sequence. This
should fix a bug in which the pax autodetection failed when used from
init(8) with a read-only root file system without a /dev/null.
* Move most of the main program into a new makedev_main function,
to allow reuse by MAKEDEV.local.
In MAKEDEV.local:
* Use the new makedev_main function defined in MAKEDEV. This allows
MAKEDEV.local to support all the options understood by MAKEDEV, instead
of only a subset. This should fix a bug in which the setup() function
could try to use pax mode even though that was previously not supported.
In MAKEDEV.local man page:
* Update list of command line options.
* Don't explain all the options, just refer to MAKEDEV(8) man page.
* Remove BUGS section now that all MAKEDEV options are supported
by MAKEDEV.local.
Improve the documentation around that.
* The "-p pax", "-m mknod", and "-s" (mtree specfile) options should
always have been mutually exclusive. Now enforce that.
* The "-f" option didn't ever work with pax or mtree mode; document that,
and make it an error to try something that won't work.
* Make pax mode the default, if no other options prevent this, and if
"pax -w -M" appears to be usable.
* Add missing options to a usage message.
output from MAKEDEV.local.
Fixes PR 37498 from dlagner at rambler.ru, using an idea from David
Laight. The while loop in the old code is executed in a subshell, so it
can't make persistent modifications to the parent shell's variables.
This change converts all the existing regression tests in regress/games
to the new framework provided by atf. As a side effect, this also moves
all the tests programs in regress/games to tests/games.
