af7a34f15a
A version of etc/Makefile that doesn't contain the word WAIT.
...
Only slightly dissimilar to the one Chuck Silvers posted to tech-toolchain.
Builds are now likely to proceed as far as running out of space in the
install media.
2006-02-17 22:09:33 +00:00
ff442725b0
Update the default targets file to reflect the new syntax.
...
Don't try to be cute with magic values like "any" here, since the netmask
is probably more easily understood in "slash notation".
2006-02-16 19:30:57 +00:00
4975ba94fa
Add some more .MAKE so that we don't run multiple parallel makes.
2006-02-15 21:59:08 +00:00
977304b7cd
Remove the dependencies against 'check_DESTDIR' and 'check_RELEASEDIR' from
...
snap_pre so that make will execute it before building the kernels.
This is all because .WAIT doesn't recursively apply to dependencies.
Add some .PHONY and .MAKE so that child makes use the same job pipe.
2006-02-11 20:56:29 +00:00
8ea6bf9b52
Install the iscsi/auths file as mode 600.
2006-02-11 09:33:16 +00:00
bcbff1364b
Add evbmips and manual pages to distribution files, as requested by wiz@
2006-02-11 01:51:22 +00:00
2235f2dadf
Add distribution entries and supporting files for the iSCSI target.
2006-02-08 19:02:58 +00:00
1dec6a8251
remove sushi records.
2006-02-08 17:19:00 +00:00
689068aead
remove reference to sushi
2006-02-08 15:32:24 +00:00
121de2c74e
Follow up the rename of the PB1000 kernel to ALCHEMY.
2006-02-06 20:14:36 +00:00
d1be1d7143
Add some dirs for groff-1.19.2.
2006-02-06 18:35:27 +00:00
779483779d
EP93xx has 8 GPIOs. I increased /dev/gpio*.
2006-02-06 13:12:41 +00:00
17c8f9e65d
PR 32666: /etc/security may cause tapes to rewind. By Duncan McEwan.
2006-01-29 23:17:24 +00:00
37bd5c7de8
mkisofs is in pkgsrc/sysutils/cdrtools now, not pkgsrc/sysutils/cdrecord.
...
Reported by Jukka Salmi.
2006-01-29 14:03:59 +00:00
c5a4ad0143
Explicitly include ${.OBJDIR} in the definition of CDROM.dir
...
and CDROM.pathlist. This probably makes no difference,
but is less confusing.
2006-01-28 21:37:11 +00:00
182dbda602
Until someone fixes .WAIT (see PR/32594) add a .NOTPARALLEL so that we
...
don't try to build the kernel sets before the kernel itself is built.
2006-01-22 20:19:52 +00:00
00d4bf02ec
Do ${MAKESUMS} for miniroot image.
2006-01-22 14:46:45 +00:00
76dc80af73
Do ${MAKESUMS} for install floppies.
2006-01-22 14:42:34 +00:00
ce1abcb4d5
zoneinfo/SystemV is gone; forgot to commit this with tzdata2005r.
2006-01-21 09:54:03 +00:00
708af10eb8
Add the pjlfilter to the HP printer example entry.
2006-01-20 08:41:29 +00:00
13f83a7396
Add /libdata, /libdata/firmware, and /usr/libdata/firmware directories.
2006-01-17 06:58:28 +00:00
d3b456094f
don't build any kernels, for now
2006-01-14 23:05:28 +00:00
e58608126f
copied from etc.amiga/
2006-01-11 16:06:36 +00:00
98d3b4882a
Install bootloader binaries into ${RELEASEDIR} for netboot.
2006-01-09 01:36:29 +00:00
f5d380b30d
Remove the sp#9600 from the entry for Pc|Pc console.
...
wscons will have set 9600 somewhere, and if it is a real serial port the
kernel will have set the baud rate based on information passed by /boot.
Now an unmodified system will boot in a Soekris net4801 at 38400 baud.
2006-01-08 22:23:46 +00:00
722d027127
Remove ./usr/X11R6/include/X11/fonts/codeconv, its contents have
...
been obsoleted quite some time ago.
2006-01-06 16:59:20 +00:00
6e6270281c
After running ${TOOL_MTREE} to create directories from the
...
specification in .../mtree/NetBSD.dist, run ${TOOL_MTREE} again with
different args to register the new directories in the metalog.
Previously, these directories were not mentioned at all
in the metalog.
Reviewed by agc
2006-01-04 15:27:12 +00:00
968e3b9beb
Add INSTALL_IPAQ to build.
2005-12-30 11:37:06 +00:00
8675bf897f
Add GENERIC_ACPI and INSTALL_ACPI kernels to the build.
2005-12-30 11:31:36 +00:00
6d7a926f8c
Add md etc files for ews4800mips.
2005-12-29 15:28:36 +00:00
611aa56a92
Add 4 new protocols: rsvp-e2e-ignore, mobility-header, udplite and mpls-in-ip.
2005-12-18 21:39:52 +00:00
01a1429f89
add altq.
2005-12-18 03:01:40 +00:00
3c194e239e
Add an extra argument to "setvar" to indicate whether a keyboard,
...
display or mouse variable should be changed. This is backwards compatible
with the old setvar style: if the argument is not specified, it defaults
to `keyboard'.
2005-12-13 21:46:47 +00:00
c77312c21b
set the query source address to 53; with this setup, the vanilla config
...
file will work in most situations.
2005-11-29 21:08:13 +00:00
6491f15ca3
fix migration problems:
...
1. missing slash created namedb127 files in the dest dir.
2. /etc/named.conf was not getting migrated.
2005-11-29 21:07:25 +00:00
7acb962baa
RFC 3879 deprecated the IPv6 site-local prefix (fec0::/10):
...
* remove all references to $ip6sitelocal and output a warning
message if the variable is defined.
* introduce $ip6uniquelocal (defaults to 'NO') that will control the
behaviour of the system when $ip6mode is ``router'' (i.e. fc00::/7
will not be routed if the variable is ``NO'') as per RFC 4193.
Thanks to Jonathan A. Kollasch for pointing this out in PR 32152.
2005-11-24 17:28:45 +00:00
5fcffc47a7
Build small INSTALL kernel for bootstrap with the cobalt native bootloader.
2005-11-23 08:22:54 +00:00
db8440ab65
Add smtps: 465 tcp/udp. We need it for postfix since we ship it with
...
TLS support.
2005-11-21 12:29:41 +00:00
850fd51087
Add /usr/share/legal.
2005-10-22 12:31:52 +00:00
3b644e49b3
Per Christos (board):
...
* move src/etc/COPYRIGHT to src/share/legal/COPYRIGHT and install that
(in /usr/share/legal)
* nuke src/share/man/man0/COPYRIGHT
* mark /usr/share/man/COPYRIGHT as obsolete
2005-10-22 06:04:57 +00:00
df48f941aa
Fix comment: "Below", variables are assigned with += not =
2005-10-22 05:46:06 +00:00
07a01daf00
Load Veriexec signatures after mountall. Use veriexec_strict and
...
veriexec_verbose to set strict level and verbose level in rc.conf.
Defaults are 0.
2005-10-15 23:26:30 +00:00
387175fffe
- tty0? -> ttyZ?
...
- add ttyE0
2005-10-15 03:00:30 +00:00
822346a086
tty0? -> ttyZ?
2005-10-15 02:58:31 +00:00
78df0b1930
Revert previous commit; I'll find a better solution.
2005-10-11 21:36:11 +00:00
d8980923a4
We need mountall here.
2005-10-11 21:24:09 +00:00
6de0a4bd6a
Add entries so that ./usr/share/doc/html/bind9/arm gets created,
...
now that we want to install something there.
2005-10-11 06:12:43 +00:00
38f5f32c9c
After building sets, make sure and checksum the kern-* files in binary/sets.
2005-10-07 17:22:12 +00:00
a1987ab423
Remove old tty0? entries and add new ttyC? and ttyM?.
2005-10-07 16:20:43 +00:00
76540c92cb
Remove compat symlink entries for old dca(4), dcm(4) and apci(4).
...
Now they might cause other problems.
2005-10-07 16:15:41 +00:00
dsl