- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.
They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
transfer as a write to ensure the memory is writable before starting any
transfer. The fault status information does not reflect this in the 'read'
status bit (i.e. it shows up as a read access), so faults with a RMW access
to non-writable memory was not getting the correct protection. The page would
be read-only and the instruction would fault over and over.
A specific example is when a process forks, and the child process attempts
to execute a RMW access to a data page, which is read-only because it's CoP
Copy-On-Write.
When checking if the page needs to be writablek, also check the locked transfer
and treat any locked transfer as a write.
68060 already handled this correctly, since it has separate read and write
fault bits, and both are set on a RMW access and the trap code was checking
the write status bit.
Fixes PR#36848.
need to understand the locking around that field. Instead of setting
B_ERROR, set b_error instead. b_error is 'owned' by whoever completes
the I/O request.
was optimizing away modifications to the frame contents (it's not nice to
trick gcc). Pass the pointer as the first argument to reduce the number
of places that would be changed otherwise. Fixes the getcwd regression
test on most m68k ports.
from proc_trampoline to match the other ports).
A DIAGNOSTIC kernel will now boot and run. LOCKDEBUG still doesn't work yet.
Also, my amiga no longer loses time.
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.
an SR value or an IPL_* constant).
- Take advange of the smaller ipl_cookie_t to shrink kmutex_t from
16 bytes to 8 bytes by overlapping storage where possible.
- Implement a RAS-based _lock_cas() for mc68010 systems (Sun2). See
sun68k/sun68k/isr.c.
Tested on various m68k platforms, but NOT Sun2. In any case, at least
Sun2 compiles now.
to avoid exporting unnecessary files to userland.
Should fix build.sh failure, which was pointed out by isaki@.
XXX: which userland program would require contents of <machine/intr.h>?
int _bus_dmatag_subregion(bus_dma_tag_t tag,
bus_addr_t min_addr,
bus_addr_t max_addr,
bus_dma_tag_t *newtag,
int flags)
void _bus_dmatag_destroy(bus_dma_tag_t tag)
that allow a (normally broken/limited) device to restrict the bus address
range it can talk to. this is used by bce(4) to limit DMA addresses to
1GB range, the maximum the chip can address.
all this is from Yorick Hardy <yhardy@uj.ac.za> with input from several
people on tech-kern.
XXX: bus_dma(9) needs an update still.
by Slava Semushin <slava.semushin@gmail.com>.
To verify that no nasty side effects of duplicate includes (or their
removal) have an effect here, I've compiled an i386/ALL kernel with
and without the patch, and the only difference in the resulting .o
files was in shifted line numbers in some assert() calls.
The comparison of the .o files was based on the output of "objdump -D".
Thanks to martin@ for the input on testing.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
dumpdev. this occurs when we try to set the dumpdev to a device
with no driver loaded. this fixes PR#34872.
in sys_swapctl, if bdevsw_lookup() fails, set dumpdev = NODEV
before calling cpu_dumpconf(). (this also fixes PR#34872.)
XXX: cpu_dumpconf() should probably be changed to take a dumpdev
XXX: and return an error in such cases, but that is a much more
XXX: intrusive change.
XXX2: this is only run-tested on sparc64 and compile tested on a
XXX2: couple of platforms.
of available test candidates. It uses the previously unused (as far as I
can tell) Timer D, in freerunning mode. It only uses a 1/200 prescaler
(20KHz), as anything faster would roll over too fast for the system timer.
(Gotta love 8-bit resolution timers!) Approved for untested commit by core@.
ignored like bpendtsleep, but a clue from the commit skipping the bpendtsleep
label for vax provides a workaround. Move the label to an earlier location
and gcc4 only generates one label. The label just marks the start of
memory protected during a memory test, so excluding a little more memory
from that test should be fine.
