eefae40298
Hide the use of config_interrupts() in one place.
2003-09-25 19:29:48 +00:00
d40837608f
1) Use config_interrupts() to attach IDE and ATAPI drives. This eliminates
...
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
2003-09-19 21:35:56 +00:00
7094514d4d
aha and le uses isadma
2003-08-14 10:03:03 +00:00
8ae8eb43b3
regen
2003-07-08 07:26:26 +00:00
8024e394f6
Add CMI8330/C3D Audio Adapter (wss). This closes PR kern/22081 by Mayukh
...
Bose <mayukh at earthlink dot net>.
2003-07-08 07:26:04 +00:00
1af7cab082
regen
2003-06-10 19:39:12 +00:00
4267622713
add a Rockwell 33.6K modem
2003-06-10 19:39:00 +00:00
1ffa7b76c4
DMA, not dma nor Dma.
2003-05-03 18:10:37 +00:00
3a494ed040
Don't malloc the channel_queue, put it in the softc. Print modes too.
2003-03-22 20:05:20 +00:00
b75bbfd9a4
Regen (add ESS1878 (ess) and ESS0005 (joy))
2003-03-05 13:10:03 +00:00
24c03411b6
Add ESS1878 (ess) and ESS0005 (joy) for ESS ES1878 audio device.
2003-03-05 13:08:27 +00:00
1035faff1d
writable, not writeable.
2003-01-06 20:30:28 +00:00
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
f8dc23efb1
regen
2002-11-19 15:06:37 +00:00
70d7b58096
add another GVC modem
2002-11-19 15:06:05 +00:00
4d00e59ba6
Correct copyright notice since this code was mostly taken from
...
if_ne_isapnp.c, not if_fmv.c.
2002-11-14 16:49:55 +00:00
6dc742c240
Don't include <i386/isa/icu.h>
2002-10-11 19:14:06 +00:00
071330b986
Slightly modify attach messages.
2002-10-05 17:52:31 +00:00
200406b07a
Overhaul of fmv(4) driver:
...
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
(XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
Fixes port-i386/9476.
2002-10-05 15:16:10 +00:00
c56045bf1a
Regen: Added Fujitsu FMV-183/184, MB86964 based ISA-PnP Ethernet adapters.
2002-10-05 14:59:36 +00:00
0c3944d3c4
Add Fujitsu FMV-183/184, MB86964 based ISA-PnP Ethernet adapters.
2002-10-05 14:57:15 +00:00
af5d007ede
- Merge if_levar.h into if_le_isapnp.c since it is included only by
...
if_le_isapnp.c.
- Rename struct le_softc -> le_isapnp_softc
- Fix some messages on attachment.
2002-10-04 16:16:32 +00:00
b449802f93
Regen: Added Melco Inc. LGY-VI, Am79c961 (PCnet-ISA) based network interface.
2002-10-04 15:43:37 +00:00
5d7ea80531
Add Melco Inc. LGY-VI, Am79c961 (PCnet-ISA) based network interface.
2002-10-04 15:42:17 +00:00
c9b3657ce9
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:33:28 +00:00
9bb77522c1
Use CFATTACH_DECL().
2002-09-30 21:31:52 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
6fcbc6b230
regen: Cabletron 22xx (AMD LANCE/PCnet Ethernet) addition
2002-09-03 17:42:54 +00:00
5c2a73c8d7
According to kern/17695, the Cabletron 22xx works with the NetBSD
...
Lance Ethernet driver attached to isapnp. Add it to the list.
2002-09-03 17:42:26 +00:00
7bce3285d4
put back RCS Id
2002-06-22 22:14:09 +00:00
705e75558c
regen
2002-05-31 15:38:55 +00:00
03dc556078
add usr v.everything.
2002-05-31 15:38:43 +00:00
1c66d18529
Make it possible to override the way register access is done.
...
This is needed for some really screwball attachments of the CS8900.
2002-05-21 02:47:04 +00:00
7f7ab48604
Rename the audio "bus" attribute audiobus to avoid confusion with audio
...
device.
2002-04-22 09:41:19 +00:00
ed5298eb2f
Make the LEDs work.
...
Green LED = we have a TEI assigned, yellow LED slow blinking = one B-channel
in use, yellow LED fast blinking = both B-channels in use.
2002-04-15 08:11:00 +00:00
bc96c942e9
This card issues a constant stream of interrupts (from an internal timer).
...
Make it do this only while /dev/isdn is open.
2002-04-15 06:59:51 +00:00
e4998611e9
Fix copyright notice.
2002-04-14 12:24:26 +00:00
0cdadad2cd
Defer initialization of the ISAC chip until we enable interrupts - it gets
...
into a strange failure mode if we do it with disabled interrupt. When
(re-)enabling interrupts reset transmitter and receiver and clear any
pending state.
2002-04-13 10:28:36 +00:00
71d5289a50
regen
2002-04-12 13:12:57 +00:00
9a5cce0e79
add some more devices; sorry I don't remember where they came from.
2002-04-12 13:12:40 +00:00
f12d3f51e7
Remove some redundant tries to disable interupts. We already avoided enabling
...
them.
Fix a stupid typo when enabling/disabling interrupts: we clear pending
interrupts when enabling, not disbling isac interrupts.
2002-04-10 23:51:06 +00:00
58502ab93e
Combine sc_enabled and sc_dying into one field sc_intr_valid, they are used
...
for the same purpose (ignoring invalid interrupts).
For cards that are not able to stop all interrupts (or we don't know a way
to do that in software, at least) run the clearirq callback even when
ignoring an interrupt because we are not enabled. Otherwise the card would
stop interrupting.
Reserve a driver specific callout handle and an int value in the generic
isic_softc to allow card drivers to implement fancy blinkenlights.
2002-04-08 12:20:49 +00:00
e5c92d53f8
Be a nice citizen, enable interrupts only when we are ready to talk
...
to the ISDN (i.e. when userland has /dev/isdn open).
2002-03-30 19:13:44 +00:00
ed4ba39c75
Add a command to layer 1 drivers to update LED state for controllers that
...
have status LEDs.
2002-03-30 17:54:17 +00:00
0bc69b6498
Now that we have all the pieces of the puzzle available start to unriddle
...
and move them in their proper places.
Move the BRI registry from layer 2 (duh!) to layer 4, so active cards
(which don't have layer 3 or layer 2 in their driver). Remove all remaining
hard coded controller and driver types. Remove any arbitrary hard coded
limits, at least those that show up in the internal API.
This fixes PR 15950.
2002-03-24 20:35:43 +00:00
d5f39a2d9c
Add explicit support of OPL3-SA2 (YMF711).
...
Not well tested....
2002-03-10 13:57:10 +00:00
8af2b425a2
Add a missing call to isapnp_config().
...
Do not hardcode IST_EDGE, use the type from the attach args.
Noticed by Christos Zoulas.
2002-02-22 21:26:47 +00:00
df34bbcc7a
Regen
2002-02-22 17:13:46 +00:00
5cdee96e49
PR/15701: Mike Wlodarczyk: ISAPNP data for another SupraExpress 56I SP V.90
2002-02-22 17:13:26 +00:00
mycroft