Commit Graph

13 Commits

Author SHA1 Message Date
enami a2369d8e97 Cancel active transfers on aic/wdc detach.
Also makes LS-120 drive works for me again.
1999-10-20 15:22:24 +00:00
bouyer a6365676fa Add a new disk flag: DRIVE_OLD for pre-ATA disks. probe routine will now set
DRIVE_OLD, DRIVE_ATA or DRIVE_ATAPI based on register signatures.
The attach routine will issue a IDENTIFY command for ATA/ATAPI disk,
to detect flase matches by the probe routine.
probe/attach should now be fully compliant with ata-4/ata-5. As a side
effect, ATAPI drives which improperly use ATA register signatures should now
be attached as ATAPI.
1999-03-10 13:11:43 +00:00
bouyer ba74f49e60 Keep track of CRC errors in Ultra-DMA mode. If we noticed a CRC error and we
need to downgrade, downgrade to PIO, as it has been shown if we got CRC errors
in Ultra-DMA mode, we will have silent data corruption in multiword DMA mode
(isn't IDE wonderfull ? :).
Set timeout to 1s for "normal" ata I/O, to minimise the effects of missed
interrupts.
1999-03-07 14:02:53 +00:00
bouyer ce870816e0 Cosmetic changes, from Soren S. Jorvan. 1999-01-29 11:36:20 +00:00
bouyer a1471db64a move wd.c:print_wderror() to ata.c:ata_perror().
In wdc_probe_caps() add code to guess the ATA revision supported (if
ATA4 if Ultra-DMA, ATA2 if PIO mode > 2). We can't rely on param.atap_ata_major
here, at last one Ultra-DMA drive claims to support only ATA-3.
Use the ATA version in ata_perror(), and to try a flush cache command
in a shutdown hook for IDE drives.
1999-01-18 20:06:24 +00:00
bouyer c37bf0ccb4 Keep track of DMA errors, and downgrade the transert mode (UDMA ->DMA,
DMA->PIO) in case of 2 consecutive errors. Don't downgrade if the
PIO/DMA/UDMA modes were forced by a config flag.
1998-12-16 13:02:03 +00:00
bouyer c10f6edafc AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner. 1998-12-04 11:17:54 +00:00
bouyer 45675ab14b - change drive_flags from u_int8_t to u_int16_t
- keep the modes supported by the drive in struct ata_drive_datas (will be
  later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
kenh 48f2e0ae6c Add a new flag to wdc_command: ATA_READREG. This will indicate that all
device registers should be read back into the wdc_command structure after
successfull command completion.  Use this this in wdioctl() for
ATAIOCCOMMAND.
1998-11-23 23:00:26 +00:00
thorpej d0a4fb616f Implement controller reference counting on ATA devices. 1998-11-20 01:23:52 +00:00
bouyer a7c841cfbc Donc reset the disk state to 0 in wd.c, set a flag which will cause it
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:24 +00:00
bouyer e8322de657 Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
bouyer 19fddaeeb5 Merge bouyer-ide 1998-10-12 16:09:10 +00:00