normal operation (/var can get filled up by flodding bogus packets).
sysctl net.inet6.icmp6.nd6_debug will turn on diagnostic messages.
(#define ND6_DEBUG will turn it on by default)
improve stats in ND6 code.
lots of synchronziation with kame (including comments and cometic ones).
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
multiple addresses from same prefix, onto single interface. PR 10427.
more info:
- 4.4BSD did not check return code from in_ifinit() at all.
4.4BSD does not support multiple address from same prefix.
- past KAME change passed in{,6}_ifinit() to upwards, toward ifconfig(8).
the behavior is filed as PR 10427.
- the commit inhibits EEXIST from rtinit(), hence partially recovers old
4.4BSD behavior.
- the right thing to happen is to properly support multiple address assignment
from the same prefix. KAME tree has more extensive change, however, it needs
much more time to get stabilized (rtentry refcnt change can cause serious
issue, we really need to bake it before bring it to netbsd)
address/routing table too much).
in6_ifloop_request()
not to request rtrequest to return an rtentry except for the ADD
operation, in order to avoid misdecreasing the refcnt (which might
cause leak of rtentry)
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
it was a bit too strong, and forbids multiple addresses from
same prefix to be assigned.
now the behavior is the same as previous - memory leak on interface address
addition failure.
http://orange.kame.net/dev/query-pr.cgi?pr=218
- remove net.inet6.ip6.nd6_proxyall. introduce proxy NDP code works
just like "arp -s".
- revise source address selection.
be more careful about use of yet-to-be-valid addresses as source.
- as router, transmit ICMP6_DST_UNREACH_BEYONDSCOPE against out-of-scope
packet forwarding attempt.
- path MTU discovery takes care of routing header properly.
- be more strict about mbuf chain parsing.
addresses. (in_control has the same problem - I'll need to check it as well)
obsolete the following two ioctls, they do not fit well against IPv6 addressing
model. (the kernel support them for some period of time, we'll remove them
in the near future)
SIOCSIFDSTADDR_IN6
SIOCSIFNETMASK_IN6
kludge entries. the situation would occur if you take the following steps:
- join multicast groups (default ones like linklocal all-node is fine)
- remove all IPv6 addresses manually
- remove pcmcia card
to thorpej: pls call in6_ifdetach() when PRU_PURGEIF is raised (just before
removing ifnet). it should do the right thing (unable to perform real test
though)
when the last IPv6 address on an interface is get removed.
in6_ifattach() configures it and in6_ifdetach() removes it.
XXX last part of in6_purgeaddr looks very ugly, but there's no event for
"interface detach" (events are for "address detach").
although this version has been changed somewhat:
- reference counting on ifaddrs isn't as complete as Bill's original
work was. This is hard to get right, and we should attack one
protocol at a time.
- This doesn't do reference counting or dynamic allocation of ifnets yet.
- This version introduces a new PRU -- PRU_PURGEADDR, which is used to
purge an ifaddr from a protocol. The old method Bill used didn't work
on all protocols, and it only worked on some because it was Very Lucky.
This mostly works ... i.e. works for my USB Ethernet, except for a dangling
ifaddr reference left by the IPv6 code; have not yet tracked this down.
code, from netbsd-current repository.
#ifdef'ed version is always available from ftp.kame.net.
XXX please do not make too many diff-unfriendly changes, we'll need to take
bunch of diffs on upgrade...
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
