Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
110,396 Commits 606 Branches 0 Tags 3.1 GiB
64b9a0f283
Commit Graph

14810 Commits

Author SHA1 Message Date
he
f8cb6d60a7 Allow this file to be included if either of audio, midi or midibus 
is non-zero (earlier only allowed it if audio was non-zero).  Fixes
build problem seen on the prep port.
 2003-03-29 13:57:43 +00:00
dyoung
243f751604 Support so-called "PLX" bridge for wi(4). From FreeBSD via Simon 
Burge. Simon writes,

"Here's the patch that Grant and I have been using on a combinations of
architectures and both NetBSD 1.6 and -current.

"This is based on FreeBSD - look for
        /* We have to do a magic PLX poke to enable interrupts */
in
        http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/wi/if_wi_pci.c
 2003-03-29 03:25:22 +00:00
perry
935d1a04e3 Fix PR/20903 for real. 
Identical patches supplied by:
Masuda Hideo <h-masuda@ootani.nagata.kobe.jp>
Christopher SEKIYA <wileyc@rezrov.net>
 2003-03-28 13:58:40 +00:00
perry
964bf1e7f5 ifdef out something dependent on PCI_VENDOR_COREGA for now. 2003-03-27 20:09:07 +00:00
drochner
ba0f309a91 Before checking the (Intel specific) SCR_T4 register, make 
sure the chip implements 100T4 (in BMSR).
The 82562 (which doesn't implement 100T4) has the SCR_T4 bit
(always?) set, which led to wrong media status reports.
approved by thorpej
 2003-03-27 19:36:49 +00:00
yamt
77312f97f8 read-only configuration support. 2003-03-27 15:34:36 +00:00
perry
3086473c25 Tell driver to accept the Corega CGWLPCIA11. 
Submitted by h-masuda@ootani.nagata.kobe.jp in PR #20903
 2003-03-27 14:43:30 +00:00
ichiro
cb6506defc regen 2003-03-27 12:20:07 +00:00
ichiro
26d61dcb91 add product TOSHIBA PA2673U CBIDE2 (IODATA OEM) 2003-03-27 12:19:44 +00:00
dyoung
bfdccc21aa 802.11 MLME-JOIN.request is an abstract MAC function that is not 
necessarily exposed to the host, so Lucent/Agere/whatever is correct
in not supporting it.
 2003-03-27 07:22:47 +00:00
matt
8909c240f2 Add GT_PCI{0,1}_{IO,MEM}{SIZE,START} options 2003-03-27 07:21:30 +00:00
matt
caff52554f Only print IRQ is it's not the default value. 2003-03-27 07:20:48 +00:00
dyoung
016e6c270f HostAP broke in version 1.4.2 of station firmware. Try 1.3.x, 1.4.9, 
or later.
 2003-03-27 05:00:21 +00:00
dyoung
913d1b877a Cosmetic: move sc_reset closer to its siblings sc_disable and sc_enable. 2003-03-27 04:53:52 +00:00
dyoung
404d2ac6e8 Introduced sc_reset to wi_softc. The bus-specific front-end gets 
to fill this.
 2003-03-27 04:34:16 +00:00
thorpej
ecb44c329e Add PCI VPD access routines. From psi.cz!freza, PR kern/20889. 2003-03-25 21:56:20 +00:00
tsubai
2a1daaf4ea Regen. 2003-03-25 18:30:14 +00:00
tsubai
f95ee615c8 Add new Apple devices. 2003-03-25 18:28:15 +00:00
mjacob
183d384362 Fix even stupider fix. It was, in fact, right the first time. Add 
a comment clarifying things.
 2003-03-25 06:25:35 +00:00
matt
0e5392f73f Make reset delay depend on the baud rate. 2003-03-24 20:03:23 +00:00
matt
bd800e6684 Fix tyops. Add 2 defines. 2003-03-24 17:03:18 +00:00
matt
a69a0868cc Make gtmpsc configurable via config file. (baud rate source, frequency). 2003-03-24 17:02:14 +00:00
matt
a09a7e1927 Update bpf interface to current. Make output buffers aligned to a 
cacheline bounary.  Only put hash table and descriptors in uncached
memory, buffers are in cached memory.
 2003-03-24 17:00:54 +00:00
pk
3592333cbb #include <sys/lock.h> 2003-03-24 14:46:00 +00:00
tron
ea710d8119 Don't print a kernel message like "bge0: gigabit link up" when a Gigabit 
link is detected. No other ethernet driver does this and this driver
doesn't do it for other modes.
 2003-03-24 12:06:05 +00:00
drochner
4b3ca2b813 Remove an aprint_normal() so that the output looks reasonable 
at least in the non-error case.
(The aprint_* stuff makes it hard to keep track of newlines and
device name tags, and it suffers from lack of rules.)
 2003-03-24 09:12:55 +00:00
ragge
a6f8cf96f1 Add rfc/rf. 2003-03-23 11:03:04 +00:00
ragge
281464eb81 Driver for RX01/02 floppies, written by Jochen Kunz. 2003-03-23 11:01:16 +00:00
simonb
ea65230233 Regen: Add device id for Trumpion T33521. 2003-03-23 00:58:16 +00:00
simonb
3dd66de041 Add device id for Trumpion T33521 (used in (at least one) Creative MP3 
player, almost attaches as a sd@umass).
 2003-03-23 00:57:15 +00:00
thorpej
8f70c6754b Add a work-around for the "short cable problem" that some DP83815 
revisions have, as discussed on the soekris-tech mailing list a
while ago, whereby one can experience excessive recieve erros when
using < 30m cables.  The patch detects overflow in a DSP filter
parameter, and corrects it by writing a known good value.
 2003-03-23 00:56:15 +00:00
matt
d641dc322f Don't malloc channel_queue, put it in the softc instead. 2003-03-22 20:09:35 +00:00
matt
3a494ed040 Don't malloc the channel_queue, put it in the softc. Print modes too. 2003-03-22 20:05:20 +00:00
matt
7ba7388e87 Don't malloc channel_queue, put it in the softc. 2003-03-22 20:01:05 +00:00
matt
0d90a1db08 No reason to malloc channel_queue, put it in the softc instead. Clean up 
a few other things while here.
 2003-03-22 19:57:14 +00:00
jdolecek
36dc52ad95 regen - add 3Com TCM6790 entry 2003-03-22 14:31:28 +00:00
jdolecek
eede41c54a add TCM6790 entry 2003-03-22 14:30:48 +00:00
nakayama
14a2f27862 Make it compile in big endian. 2003-03-22 11:32:38 +00:00
nakayama
a8e1b2f5c5 PCI-CardBus bridge support for sparc64: 
- add pccbb_attach_hook in pccbbattach for MD initializations.
- omit arithmetics to bus_space_handle_t.
- remove use of IST_LEVEL; not defined on sparc64 and unused.
 2003-03-22 06:25:14 +00:00
nakayama
64f7818314 PCI-CardBus bridge support for sparc64: 
- use u_long for extent_alloc_subregion result instead of bus_addr_t.
  (sizeof u_long != sizeof bus_addr_t on 32bit kernels of sparc64)
 2003-03-22 06:18:22 +00:00
dsl
bd99e3429d Use 'void *' instead of 'caddr_t' in prototypes of VOP_IOCTL, VOP_FCNTL 
and VOP_ADVLOCK, delete casts from callers (and some to copyin/out).
 2003-03-21 23:11:19 +00:00
thorpej
3f2184def7 Work around a buggy PHY in some Seagate S-ATA drives which get confused 
by the way some S-ATA controllers packetize data when the sector count of
the transfer mod 15 is 1.
 2003-03-21 22:40:56 +00:00
dsl
60418b39b7 Change 'data' argument to fo_ioctl and fo_fcntl from 'caddr_t' to 'void *'. 
Avoids a lot of casting and removes the need for some line breaks.
Removed a load of (caddr_t) casts from calls to copyin/copyout as well.
(approved by christos - he has a plan to remove caddr_t...)
 2003-03-21 21:13:50 +00:00
mjacob
2b72827e41 Fibre Channel doesn't need bus reset settle time. 2003-03-21 18:05:16 +00:00
uwe
f6280fb246 Add igsfb. 2003-03-21 09:59:30 +00:00
thorpej
35b45642d8 Regen; add more LSI MPT IDs. 2003-03-20 05:50:12 +00:00
dbj
1820cd2e5c use PRId64 to printf bp->b_blkno, which is of type daddr_t 2003-03-20 05:49:21 +00:00
thorpej
5d2e1c600f Add some more LSI MPT IDs. 2003-03-20 05:49:20 +00:00
thorpej
d7e289bb70 Add support for the Silicon Image SATALink 3112 Serial ATA controller. 2003-03-20 04:22:49 +00:00
christos
fb66693ce7 It is not appropriate for pcivar.h to include "locators.h" 
The two files that need it, should include it themselves.
 2003-03-19 17:56:58 +00:00