938aca290c
Don't try to spill entries from the kernel's pmap. As of now, they can no
...
longer be evicted, only user-mappings can be evicted.
2003-08-08 06:10:43 +00:00
330dc2e202
Allow only user-mappings to be evicted (spillage). This prevents the
...
dreaded eviction of a kernel stack page.
2003-08-08 06:06:48 +00:00
3af5adac38
fix description of MAKEOBJDIR. from Martin Husemann
2003-08-08 01:52:24 +00:00
8c46e68137
Add more sh7709 interrupt sources. Split sh3 and sh4 specific
...
switches because of conflicts in exception codes.
2003-08-08 00:52:42 +00:00
d1e6225495
add lubbock_pcic.c
2003-08-08 00:11:21 +00:00
c17ec7adc5
* RTC can now be set to a new date.
...
Thanks to Ryo Shimizu for sending in a patch.
* Use proper G2 bus space functions to enforce locking protocol.
2003-08-07 23:14:13 +00:00
a8f065cf19
Add "esiop" driver to PCI bus table, so mapping OF boot device pathes
...
to autoconfig device nodes works when booting from a esiop attached drive
(instead of the old siop)
2003-08-07 22:24:34 +00:00
5e1e6d519e
Added three scsi IDs which were tested by Dave Barnes who sent in
...
three PRs regarding them: 17836, 17837, 17838. Did a few kernel
compiles with them just to make sure they are okay. Approved by
christos@, thanks to Dave for sending the PRs and verifying to me
that they work.
2003-08-07 17:54:26 +00:00
1f2944e8e5
Add esiop at pci to GENERIC which already have siop at pci.
...
esiop has been tested enouth now.
esiop not added to INSTALL kernels because of possible space constraint.
siop should be able to drive all adapters supported by esiop.
2003-08-07 17:17:58 +00:00
02087c6497
make this compile again. (arm32_bus_dma_tag._cookie)
2003-08-07 16:58:35 +00:00
eb7c1594f1
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22280, verified by myself.
2003-08-07 16:42:00 +00:00
aad01611e7
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22364, verified by myself.
2003-08-07 16:26:28 +00:00
208a93d254
fix dont reset register when every interrupt.
...
pointed by Shoichi Miyake port-arm/22392
2003-08-07 13:32:27 +00:00
b22ef904f5
Enable ahd(4) by default. There are some problems with higher speeds /
...
packetized mode, but those can be disabled in the Adaptec BIOS setup.
2003-08-07 12:06:15 +00:00
79f7012e02
Delete 'pf'.
...
NetBSD/evbsh5 will pick up the 'pf' entry from arch/sh5/conf/majors.sh5.
2003-08-07 11:57:48 +00:00
f84513a754
add TNF copyright
2003-08-07 11:32:34 +00:00
326b2259b7
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22366, verified by myself.
2003-08-07 11:25:11 +00:00
89aaa1bb64
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22365, verified by myself.
2003-08-07 11:13:06 +00:00
075022b349
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22309, verified by myself.
2003-08-07 10:30:41 +00:00
bf2d0ca599
Mention /etc/sysctl.conf. Bump date. Closes PR 22213.
2003-08-07 10:11:02 +00:00
276d62f603
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22308, verified by myself.
2003-08-07 10:04:22 +00:00
0402922a63
Sort usage, and move a word.
2003-08-07 10:04:21 +00:00
bf07c8719a
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22308, verified by myself.
2003-08-07 10:04:11 +00:00
136392f22f
Add arguments to options in long description.
2003-08-07 10:04:01 +00:00
1c976c2b9c
Bump date for callout_invoking; fix macro usage; remove superfluous "The".
2003-08-07 09:53:33 +00:00
73b0a7eafd
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22307, verified by myself.
2003-08-07 09:51:08 +00:00
0afb7885e6
Remove empty line, and use Aq instead of \*[Lt]\*[Gt].
2003-08-07 09:49:31 +00:00
8e6ab8837d
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22284, verified by myself.
2003-08-07 09:46:37 +00:00
7539e84445
Bump date for flushall description.
2003-08-07 09:46:17 +00:00
039cc95684
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22270, verified by myself.
2003-08-07 09:44:09 +00:00
b3b0c404d2
Sort SEE ALSO; add commas between Nm entries in NAME section.
2003-08-07 09:41:14 +00:00
e5aeb4ea46
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22269, verified by myself.
2003-08-07 09:36:50 +00:00
74b7d6e9f2
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22268, verified by myself.
2003-08-07 09:27:56 +00:00
865595bdf3
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22253, verified by myself.
2003-08-07 09:20:39 +00:00
dc4f8c2e1a
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22252, verified by myself.
2003-08-07 09:15:17 +00:00
b5b2954259
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22249, verified by myself.
2003-08-07 09:05:01 +00:00
da53b9c28e
make net.inet6.ip6.redirect actually work. from Tomoyuki Sahara via kame
2003-08-07 08:52:32 +00:00
291a252c2e
need to pass flags as argument to TIOCFLUSH ioctl
...
fixes bin/22391 by SAITOH Masanobu
2003-08-07 07:01:09 +00:00
ef6f82b46b
Remove nntp line -- it refers to a non-existing daemon.
...
Closes PR 22388, from Nate Hill.
2003-08-07 06:44:29 +00:00
510efbe0a6
regen (fix ID of Radeon 9100 Secondary)
2003-08-07 05:35:36 +00:00
3bd8bc4f5c
Fix ID of Radeon 9100 Secondary; noted by Quentin Garnier.
2003-08-07 05:35:04 +00:00
190eaf015f
Various updates to sync with mainline code. Nothing of great significance
...
to NetBSD, yet.
2003-08-07 01:12:15 +00:00
cef319e0b4
Note both active and nvram WWNN/WWPNs
...
Fix the bug where the thread worker constantly looped. It was a race as
to whether or not the thread fired up or a polled/probed command happened
first, or maybe it's due to other scsipi changes, but we never set the
value that caused the fc thread worker to actually go to sleep until an
initial loop up.
This was rather ugly as it consumed nearly all CPU time available from thence
on. Bad.
2003-08-07 01:10:53 +00:00
a1c1589fcf
Clean out the 'fw' variable part of a CTIO2- the f/w doesn't actually
...
pass us back anything interesting here.
2003-08-07 01:09:02 +00:00
03782491e6
Update from mainline: add ISP_NO_ZIO option. constify a few items.
...
LINT/ProPolice fixes from OpenBSD.
In isp_reinit, clear the port database.
2003-08-07 01:08:10 +00:00
543f393343
Add in changes from Matt Thomas to check for 64 bit PCI stuff.
...
Note that a Qlogic 1020 is Fast Wide, not Ultra Fast Wide.
2003-08-07 01:05:56 +00:00
18ccc9b90c
Add and use the log_err, log_errx, log_warn and log_warnx functions that act as
...
wrappers for err, errx, warn and warnx respectively when running in foreground
and call syslog functions when running in daemon mode.
Also add and use an extra log_info function for other types of information.
2003-08-06 23:58:40 +00:00
a55ba0a54c
Add example section for action mode.
2003-08-06 22:16:34 +00:00
a79323123c
Add the `action' mode, which can be used to associate commands with mouse
...
button events. This mode needs to be explicitly enabled at runtime, and
does nothing if not configured.
As there are now two different modes available, adjust the manpages
accordingly, describing what they do and how they work separatedly.
While here, remove a bunch of unused stuff (event syntax) from config file
parsing. This was initially added with this new mode in mind, but it has
not been used to make it a lot simpler.
2003-08-06 22:11:48 +00:00
60cc8ce6f9
(FAST_IPSEC): attach PFKEY socket domain when either (KAME) IPSEC or
...
FAST_IPSEC is configured. Likewise for sysctl.
2003-08-06 20:34:35 +00:00
matt