f9175d6bc7
NetBSD/x68k boot loader. The xxboot now can boot NetBSD from
...
1. >1GB SCSI disks,
2. any of the top 7 partitions on disks, and
3. any SCSI interface.
1998-09-01 20:02:32 +00:00
ecc30b1784
New boot program.
...
Load and execute NetBSD/x68k kernel from Human68k.
1998-09-01 19:55:32 +00:00
8f7b16dd71
X680x0 IOCS library.
1998-09-01 19:53:54 +00:00
f67f070984
Human68k DOS library.
1998-09-01 19:53:25 +00:00
16964edb07
The files are moved to stand/xxboot/gunzip/.
1998-09-01 19:52:48 +00:00
bfd67e9c16
Files used in common.
1998-09-01 19:51:56 +00:00
19f52a192c
New utility program.
...
Convert a.out to Human68k ".x" format executable.
1998-09-01 19:51:07 +00:00
330356bc46
The files are moved to stand/xxboot/.
1998-09-01 19:49:33 +00:00
b8e89a2507
Removed unused files.
1998-09-01 19:48:00 +00:00
1bf1486a77
Added an include file on port dependent boot information.
1998-09-01 19:47:38 +00:00
62f989f832
Removed unused files.
1998-09-01 19:44:14 +00:00
e97803df25
Typo.
1998-09-01 15:05:21 +00:00
7f4ad4748e
Eliminated vm_offset_t and vm_size_t.
1998-08-22 14:38:36 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
cdf829a998
Assign copyrights to TNF.
1998-08-15 04:22:45 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
a6b5ab0c92
Moved parioctl.h to the system header directory.
1998-08-07 16:16:36 +00:00
4c4cdda003
Switched to MI zs driver.
1998-08-07 11:19:13 +00:00
d082dd3db4
Moved grfioctl.h and iteioctl.h to the public include directory.
1998-08-06 14:08:53 +00:00
4df8f47ebc
Switched to MI zs driver.
1998-08-05 16:08:33 +00:00
e8551dcab3
Fixed stray pointer access reported by Yasufumi Itoh.
1998-08-05 15:57:43 +00:00
89f91f85fa
Fixed typo.
1998-08-05 14:40:20 +00:00
b72d8d17f9
__BROKEN_INDIRECT_CONFIG fixes.
1998-08-04 16:51:51 +00:00
ea7f1dbe36
Some files were not deleted with make clean.
...
Keymap files are now installed in /usr/share/keymaps/x68k.
1998-08-04 16:39:55 +00:00
aced90770c
Message fixes.
1998-08-04 16:10:45 +00:00
233cd5d60b
RB_POWERDOWN is now supported.
...
Check if the power switch is open (off) in the shutdown_hook,
and try removing the power in cpu_reboot.
poffd default action is now shutdown -p.
1998-08-04 16:07:53 +00:00
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
1b46ebe1d9
Add elf_machdep.h to the INCS list.
1998-07-12 17:53:29 +00:00
639cc899cf
Basic elf_machdep.h for m68k; doesn't include relocations, yet.
1998-07-12 01:17:58 +00:00
d47ea67c1f
Define one page free list, and put all pages on it.
1998-07-08 04:43:18 +00:00
d275e56dee
* defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID.
...
TODO: revisit interaction between native compat and emul compat usage.
1998-07-05 08:49:30 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
94b9143ddd
add RCSID
1998-06-30 12:22:36 +00:00
c0eed6da3d
sync with -current after a long silence
1998-06-30 11:59:09 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
37b378d836
defopt COMPAT_HPUX
1998-06-25 23:56:39 +00:00
8aee7782f5
defopt COMPAT_SUNOS
1998-06-25 23:40:33 +00:00
971b8956ef
defopt KTRACE
1998-06-25 21:18:11 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
00ede2160e
Change ddb_init() for a.out to provision for kernels which are not booted by
...
the current 'bootblock' method, like the Shark, which preloads and preformats
the symbol table right in the boot code.
1998-06-09 01:57:41 +00:00
9ef6fa7387
Build pmap_boostrap.o without profiling; we can't call mcount before the
...
mmu is enabled!
1998-05-31 23:28:07 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
7a0f63f982
Back out the defopt for M680?0. As pointed out to me, this breaks ports which
...
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
1998-05-24 19:32:34 +00:00
6a6812fd92
Move M680[2346]0 to opt_m68kcpu.h.
...
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
1998-05-23 20:51:06 +00:00
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
aa36ad1f55
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:01:41 +00:00
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
1ed8ea9966
note second parm of sysarch() is now void *, + trivial KNF, etc.
1998-02-25 21:41:55 +00:00
772da350d4
Disable the message buffer during crash dumps by clearing msgbufenabled,
...
not msgbufmapped.
1998-02-19 04:18:30 +00:00
3bbb7f7d45
Move pmap_map() function definition to MD headers, as appropriate. It's
...
an internal function, and the VM system shouldn't try to prototype it.
(Note that some ports _don't_ prototype it.)
1998-02-18 02:05:32 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
f49dd3ef30
Avoid declaring the "astpending" and "want_resched" globals in cpu.h,
...
as this breaks C++ code that happens to indirectly include this header.
Both Matthias Scheler and I noticed this, independently.
This problem notably does not affect the atari and sun3/sun3x ports,
which have already implemented a similar solution.
1998-02-13 07:41:45 +00:00
b5c132e4d2
Prototype __flt_rounds() consistently.
1998-02-03 01:26:20 +00:00
b3fa451227
Amiga uses the common m68k/sig_machdep.c now. Also moved its definition from
...
the other 68k ports' files.${port} to arch/m68k/conf/files.m68k.
1998-02-01 21:23:24 +00:00
3a83745247
In some hp300-derived pmaps, in pmap_page_protect(), don't walk off the
...
end of the list of physical->virtual entires into NULL space if the last
entry is (mysteriously) wired in the pmap. Add a DEBUG printf on alpha.
1998-01-31 01:32:55 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
f32f947061
Update for changes to config.
1998-01-12 20:52:29 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
6ac24f05df
Garbage-collect VM_PMAP.
1998-01-06 08:46:11 +00:00
2317f9064e
Garbage-collect pm_stchanged.
1998-01-06 08:40:50 +00:00
07f835de1f
Garbage-collect PMAP_ACTIVATE() call here; it's no longer necessary.
1998-01-06 07:49:36 +00:00
61567b54de
Garbage-collect pm_stchanged; it's not used by anything.
1998-01-06 07:02:58 +00:00
d11b109f2b
Garbage-collect use of the PCB's copy of the user segment table pointer.
1998-01-06 06:51:40 +00:00
2ec6474b31
RCSID Police.
1998-01-06 04:44:59 +00:00
a8f80ad4fd
Fix a bogosity apparently inherited from when the Utah 4.3BSD code base
...
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
1998-01-05 23:16:21 +00:00
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
dd966fca05
Change an argument name to PMAP_ACTIVATE() to more accurately describe the
...
semantics of the argument.
1998-01-01 20:05:23 +00:00
287b63b321
- Make pmap_activate() and pmap_deactivate() take a struct proc *.
...
- Define active_user_pmap() and use it in the appropriate places (from hp300
port).
1998-01-01 19:52:50 +00:00
ac86463ce3
Make compile without options MACHINE_NONCONTIG.
1997-12-24 17:48:10 +00:00
49779c8c5a
Add MDP_STACKADJ.
1997-12-24 17:46:08 +00:00
bb7bb0093d
Add COMPAT_13.
1997-12-01 16:33:39 +00:00
315f8de9c2
add pseudo-device rnd, commented out
1997-11-20 08:11:14 +00:00
e8cb388f65
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:58:31 +00:00
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
2793a8e02a
use CPPFLAGS instead of CFLAGS
1997-10-26 22:09:43 +00:00
a16fd7d74e
Make these compile after m68k/m68k.h 1.4->1.5.
1997-10-26 21:41:34 +00:00
a6dfd800c9
Test device is configured in interrput handler.
1997-10-19 20:45:11 +00:00
3e2d17592a
add support for MK-HA2 Mach-2 SCSI host adaptor.
1997-10-19 20:41:02 +00:00
968a155917
Add options M68060, mha driver.
1997-10-19 16:04:57 +00:00
742eb9d713
new bootfloppy kernel configuration file.
1997-10-19 16:03:11 +00:00
ad0f2e276a
pretty message.
1997-10-19 15:32:57 +00:00
9e3da87164
Use common m68k/sig_machdep.c.
1997-10-19 15:17:24 +00:00
624322fb6a
Make this compile new bootblock code.
1997-10-19 11:03:38 +00:00
3f9967ed1d
New bootblock code (compressed kernel support).
...
mostly written by ITOH Yasufumi.
1997-10-19 11:00:51 +00:00
bbe9571856
Make this compile again.
1997-10-19 10:59:55 +00:00
cfe6621afa
Support of MK-HA1 Mach-2 SCSI adaptor.
1997-10-19 09:29:25 +00:00
73c0b0f2a6
for ramdisk kernel
1997-10-19 08:16:40 +00:00
ea023e3b94
Use rnd.h and #if NRND > 0.
1997-10-17 20:28:06 +00:00
e8b2ab848c
Make this compile again.
1997-10-17 20:24:35 +00:00
3846baf664
Fixed gcc warnings.
1997-10-16 16:24:47 +00:00
3f6dddc5cd
Remove use of register.
1997-10-16 15:43:54 +00:00
0154e69e5a
Pulldown from marc-pcmcia branch: minimal changes to change x68k port's
...
"com" (now "xcom") driver to avoid name collision with the more
heaviliy-used "com" driver.
1997-10-15 23:39:18 +00:00
28558b28eb
rcsid fascism
1997-10-13 14:22:22 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
16bcf097c2
call arpintr() if NARP > 0.
1997-10-12 18:49:25 +00:00
075543ca76
Replace trap1 and trap2 to native 4.3 process.
1997-10-12 18:25:36 +00:00
e2f8a8b9cd
Oops, dk_establish still need.
...
Backout previous commit, added prototype.
1997-10-12 18:23:18 +00:00
787edcfff0
Fix compiler warnings.
1997-10-12 18:20:21 +00:00
f78ab6d1cc
Added 'arp' to Neptune-X ethernet interface.
...
Removed local if_se entry (no longer works.)
1997-10-12 18:16:43 +00:00
570278ec01
Added prototypes.
1997-10-12 18:06:21 +00:00
f5733259c7
Added FPU_68060
1997-10-12 18:02:32 +00:00
fd9fae64cc
Added prototype.
1997-10-12 14:44:12 +00:00
34c4ab5da2
Prune unused function.
1997-10-12 12:15:15 +00:00
9418615252
Added prototypes.
1997-10-12 12:13:48 +00:00
1db0621f0e
Add prototype.
1997-10-12 06:41:45 +00:00
9ce308d6d6
Added header file for prototype.
1997-10-11 11:15:00 +00:00
e23506ac2e
Added header file.
1997-10-11 11:13:54 +00:00
a7aef46287
Use m68k/Makefile.inc.
1997-10-11 09:11:17 +00:00
5c8d588138
Nuke NOOBJ.
1997-10-11 08:44:42 +00:00
acf0e569a5
Update all the tags goo, and use bsd.subdir.mk.
1997-10-11 08:42:02 +00:00
017e6c7f10
Address PR 4120 by synchronizing v{,un}mapbuf() with the i386 vm_machdep.c,
...
v 1.27, pulling in changes made there by Charles Hannum. Also, incorporate
a few tweaks made by Gordon W. Ross in the sun3 version of this change.
1997-10-11 06:38:45 +00:00
8e80f913ed
Use CLEANFILES= instead of target clean.
1997-10-11 01:19:15 +00:00
aca42300b3
Use CLEANFILES= instead of target clean.
1997-10-11 00:26:51 +00:00
051b06a759
Add prototypes.
1997-10-10 21:45:18 +00:00
a9685de195
Fdopen --> fdopen
1997-10-10 21:42:38 +00:00
affaadc59f
Prune unused function.
1997-10-10 21:40:50 +00:00
a6f8cf735d
WARNify, add prototype, remove use of register.
1997-10-10 17:48:06 +00:00
35c6ab7eaf
Add prototype, remove use of register.
1997-10-10 17:46:09 +00:00
5a60f8df47
Remove use of register.
1997-10-10 17:43:09 +00:00
9dfe683ff7
Add missing prototypes.
1997-10-10 12:55:26 +00:00
87e21e080a
Add missing prototype.
1997-10-10 12:54:02 +00:00
9f6d6708f4
Help crosscompiling, by as -> $(AS). Define AS?= as in the calling
...
Makefile.$(ARCH)es. Will hopefully fix the (remaining) part or pr4010.
1997-10-09 20:40:18 +00:00
15d57c4473
Oops, fixed error in previous commit.
1997-10-09 13:26:18 +00:00
deff7d5471
Added prototype.
1997-10-09 13:19:26 +00:00
a6a631ac6c
Added missing prototype.
1997-10-09 13:00:49 +00:00
a947a7eff9
Remove __BDEVSW_DUMP_OLD_TYPE.
1997-10-09 12:59:23 +00:00
2ce1763013
Prototype spl0().
1997-10-09 12:58:31 +00:00
da7890c526
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:31:58 +00:00
fc752db7e8
Use _ASM_LABEL.
1997-10-08 16:02:04 +00:00
37fce9c90f
Oops, forgot to commit this when doing the recent 060SP Makefile change.
1997-10-07 19:26:11 +00:00
7d508b124f
define SIZE?=size, and use ${SIZE} instead of size. makes cross
...
compilation easier
1997-10-03 07:17:00 +00:00
7f41ec0345
PR/4162: Chris Jones: make cleandir does not work properly; it does not
...
remove the object files and the .depend file in the kernel build directory.
1997-09-30 22:50:53 +00:00
d5e867bb03
Build the 68060 support package in the kernel build dir.
...
XXX PCB_ONFAULT is still hardwired to 64 in netbsd060sp.S.
1997-09-28 20:49:56 +00:00
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
5933da103c
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC.
1997-09-12 09:23:18 +00:00
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
e9f392b0a9
Eliminate some uses of FPCOPROC.
1997-09-12 08:08:50 +00:00
49f0bbb105
Nuke Locore.c. It's way too out of date to be useful at this point.
1997-09-12 07:59:20 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
itohy