Like GNU dd(1) similar operands, iflag and oflag allow specifying the
O_* flags given to open(2) for the input and the output file. The values
are comma-sepratated, lower-case, O_ prefix-stripped constants documented
in open(2).
Since iflag and oflag override default values, specifying oflag means
O_CREATE is not set by default and must be specified explicitely.
Some values do not make sense (e.g.: iflag=directory) but are still used
and will raise a warning. For oflag, values rdonly, rdwr and wronly are
filtered out with a warning (dd(1) attempts open(2) with O_RDWR and
then O_WRONLY on failure).
Specifying oflag=trunc along with (seek, oseek or conv=notrunc) is
contradictory and will raise an error.
iflag and oflag are disabled if building with -DMALLPROG
One of motivation of this change is to make the behavior of test(1)
-nt/ot with preserved copy (like cp -p) closer to the NetBSD 6.
Of course whether full timestamps are kept or not depends also on
underlying file system.
The ifdef added in mv(1) since existing ifdefs was our local change
to compile it on solaris (though I couldn't test it):
http://mail-index.netbsd.org/tech-userlevel/2014/11/28/msg008831.html
Rename the following reference documents to match their programs:
shell -> sh
viref -> vi
and rename the following to match their topic better:
ipctut -> sockets
ipc -> sockets-advanced
Also, the old "timed" and "timedop" docs are now ref5/timed and
ref8/timed respectively, as the first of these documented the
protocol.
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.
Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.
Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.
Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.
Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.
- Build and install text, ps, pdf, and/or html, not roff sources.
- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.
- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.
- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.
- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)
- Enumerate the .png files groff emits along with html so they can be
installed.
- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn
- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.
- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.
Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.
Evaluation of commands goes completely haywire if a file containing
a break/continue/return command outside its "intended" scope is sourced
using a dot command inside its "intended" scope. The main symptom is
not exiting from the sourced file when supposed to, leading to evaluation
of commands that were not supposed to be evaluated. A secondary symptom
is that these extra commands are not evaluated correctly, as some of them
are skipped. Some examples are listed in the How-To-Repeat section.
According to the POSIX standard, this is how it should work:
dot:
The shell shall execute commands from the file in the current
environment.
break:
The break utility shall exit from the smallest enclosing for, while,
or until loop, [...]
continue:
The continue utility shall return to the top of the smallest
enclosing for, while, or until loop, [...]
return:
The return utility shall cause the shell to stop executing
the current function or dot script. If the shell is not currently
executing a function or dot script, the results are unspecified.
It is clear that return should return from a sourced file, which
it does not do. Whether break and continue should work from the sourced
file might be debatable. Because the dot command says "in the current
environment", I'd say yes. In any case, it should not fail in weird
ways like it does now!
The problems occur with return (a) and break/continue (b) because:
1) dotcmd() does not record the function nesting level prior to
sourcing the file nor does it touch the loopnest variable,
leading to either
2 a) returncmd() being unable to detect that it should not set
evalskip to SKIPFUNC but SKIPFILE, or
b) breakcmd() setting evalskip to SKIPCONT or SKIPBREAK,
leading to
3) cmdloop() not detecting that it should skip the rest of
the file, due to only checking for SKIPFILE.
The result is that cmdloop() keeps executing lines from the file
whilst evalskip is set, which is the main symptom. Because
evalskip is checked in multiple places in eval.c, the secondary
symptom appears.
>How-To-Repeat:
Run the following script:
printf "break\necho break1; echo break2" >break
printf "continue\necho continue1; echo continue2" >continue
printf "return\necho return1; echo return2" >return
while true; do . ./break; done
for i in 1 2; do . ./continue; done
func() {
. ./return
}
func
No output should be produced, but instead this is the result:
break1
continue1
continue1
return1
The main symptom is evident from the unexpected output and the secondary
one from the fact that there are no lines with '2' in them.
>Fix:
Here is patch to src/bin/sh to fix the above problems. It keeps
track of the function nesting level at the beginning of a dot command
to enable the return command to work properly.
I also changed the undefined-by-standard functionality of the return
command when it's not in a dot command or function from (indirectly)
exiting the shell to being silently ignored. This was done because
the previous way has at least one bug: the shell exits without asking
for confirmation when there are stopped jobs.
Because I read the standard to mean that break and continue should have
an effect outside the sourced file, that's how I implemented it. For what
it's worth, this also seems to be what bash does. Also laziness, because
this way required no changes to loopnesting tracking. If this is not
wanted, it might make sense to move the nesting tracking to the inputfile
stack.
The patch also does some clean-up to reduce the amount of global
variables by moving the dotcmd() and the find_dot_file() functions from
main.c to eval.c and making in_function() a proper function.
We have written a diff to our ls(1) to recover the traditional behaviour
of -f implying -a. This change does not only accommodates POSIX.1
but also matches traditional UNIX.
OpenBSD commit message:
CVSROOT: /cvs
Module name: src
Changes by: sobrado@cvs.openbsd.org 2014/03/31 14:54:37
Modified files:
bin/ls : ls.1 ls.c
Log message:
restore the traditional behavior of -f implying -a; apparently Keith Bostic
forgot to restore it when the -f flag was put back on 2nd of September 1989,
after being removed on 16th of August as a consequence of issues getting it
working over NFS, so deviation from traditional UNIX behavior in all BSDs
looks like an historical accident; as a side effect, this change accommodates
behavior of this option to IEEE Std 1003.1-2008 (``POSIX.1'').
joint work with jmc@ (who found the inaccuracy in our implementation),
schwarze@ (who provided a detailed tracking of historical facts) and millert@
ok millert@, schwarze@
