default label. Allows creating an FFS filesystem on an unlabeled disk
without needing to use the RAW partition. If an RDSK block is found,
reset the default label prior to processing the PART blocks.
media. (Will this ever be anything other than 2048?)
- bounds_check_with_label() has been fixed, so put the correct partition
size in the default disklabel.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
(allocating TX padding buffer in RX DMA mem to save resouces)
and use it where appropriate
- add a comment about the hack in re_attach() too
- pass a correct size on bus_dmamem_unmap() for RX DMA mem
the Reaktek's driver, which are also used in FreeBSD.
Fixes RX FIFO overrun errors on my Duron 1300MHz PC.
(Note the configuration values for rtk(4) are not changed)
Also add some debug printf's in RX error case (disabled by default).
sense when chaning the MAC address of the virtual interface as pointed
out by Hans himself.
So, introduce ether_nonstatic_aton() and make etherip(4) and tap(4) use it.
* XXX: This is bogus. There's an obvious race condition between the time
* XXX: the disk is open for writing, in which an attacker can access a
* XXX: monitored file to get its signature cached again, and when the raw
* XXX: file is overwritten on disk.
* XXX:
* XXX: To solve this, we need something like the following:
* XXX: open raw disk:
* XXX: - raise refcount,
* XXX: - invalidate fingerprints,
* XXX: - mark all entries with "no cache" flag
* XXX:
* XXX: veriexec_verify:
* XXX: - if "no cache", don't cache evaluation result
* XXX:
* XXX: close raw disk:
* XXX: - lower refcount,
* XXX: - if refcount == 0, remove "no cache" flag from all entries
Notable changes:
* Fixes PR 34268.
* Separates the code from gif(4) (which is more cleaner).
* Allows the usage of STP (Spanning Tree Protocol).
* Removed EtherIP implementation from gif(4)/tap(4).
Some input from Christos.
USB2/highspeed: This is an exponent now, not milliseconds.
(There are wrong example descriptors for hubs in the USB2 spec; tolerate
invalid values and assume 256ms which is good for hubs, just in case
someone blindly copied from the book.)
-being here, fix an obvious memory leak
mhitch