6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
da499b1e3a
make the wait_ready loop use pcic_delay() (thus tsleep) too for cards
...
that take a while to become ready
2000-01-25 19:38:18 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
3f72e2e3f9
Oops; fix a bug in the previous:
...
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
2000-01-25 18:04:07 +00:00
b9a4fe55b5
Switch the HSE and HCPE messages. Pointed out my mycroft.
2000-01-25 17:31:05 +00:00
9d17b2ca6a
bring in stabilization codes in freebsd PAO/bsdi cnw driver.
...
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
not enabled by default - try it if you see performance problem on
heavy traffic)
2000-01-25 16:48:47 +00:00
c02060ba9b
Regen.
2000-01-25 15:44:21 +00:00
d1c481fc31
Fix a typo.
2000-01-25 15:43:59 +00:00
e33c595472
Do a CARDBUS_BM_ENABLE just to be sure.
2000-01-25 15:29:43 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
0335569abc
Make it compile even if you leave out the ucom attachment.
2000-01-25 13:56:23 +00:00
a27ee91364
Remove an item.
2000-01-25 13:27:07 +00:00
f0ebd281e5
Add done method for root control transfers.
2000-01-25 12:06:21 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
beaf3d82fc
Ooops, add another ucom file.
2000-01-25 08:46:00 +00:00
a2b1ac707a
Split the umodem driver into two parts: the part that emulates a tty over
...
two bulk pipes, and the setup and status fiddling goo.
This allows the former part to be shared by other drivers that need to
look like a tty.
2000-01-25 08:12:58 +00:00
509c38cc44
Regen.
2000-01-25 08:07:14 +00:00
6a4d06f322
Use the Ethernet vendor ID to differentiate multiple cards with the same
...
vendor,product pair. (Yuck.)
2000-01-25 08:06:49 +00:00
03ebb087f7
Regen.
2000-01-25 06:53:26 +00:00
4d836ce7f2
Fix product code for Aironet PC4800. Should be 0x0007.
2000-01-25 06:52:54 +00:00
b5064330de
The cfe is initialized to the default entry, when a table entry value
...
is present don't OR in the flags with the defaults, replace them.
2000-01-25 06:36:17 +00:00
b50b01e020
Don't enable the interrupt until after we cycle the power, disable
...
interrupt at disable, and make this code look more like the std pcic
code. From Mycroft and I.
2000-01-25 06:16:34 +00:00
8c090e4862
set havenet to 0 when we are switching between operating modes and only
...
after association in ifrastructure mode. Also, deal with roam start
and rejoin net commands.
2000-01-25 05:32:28 +00:00
be3c43687c
Make sure the latency timer is set to a reasonable value.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2000-01-25 03:44:27 +00:00
c4d8a60bac
Handle Cobalt Networks interfaces, which are 21143 pass 4.1 devices
...
with a simple (MAC address only) SROM format.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:23:56 +00:00
8f7ad1f798
When checking for a non-standard address ROM format, allow the
...
Cobalt Networks address ROM through.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:14:12 +00:00
ea0751f1aa
Finish with fixing the SOFTCURSOR stuff.
2000-01-25 02:44:03 +00:00
43311a870f
Regen
2000-01-25 01:17:40 +00:00
97597e1d12
Add ID for BayStack 660 (DS version of 650)
2000-01-25 01:15:06 +00:00
7acb650645
- fix comment style/indentaion.
...
- add comment to refer aic_pcmcia_enable.
2000-01-24 23:14:23 +00:00
7d55178466
support switching to/from adhoc/infrastructure mode with media opt.
...
fill in 802.11 correctly for 802.11 infrastructure.
code not verified with base station yet.
2000-01-24 22:05:53 +00:00
e2e27455dd
Use config_pending.
2000-01-24 18:35:51 +00:00
0c93dded4a
Use config_pending. Addresses kern/9247.
2000-01-24 18:34:44 +00:00
7ac1ad97ba
The TI 2030 is a PCI-PCI bridge and doesn't belong here
2000-01-24 15:51:59 +00:00
4b45d02e15
regen
2000-01-24 15:50:16 +00:00
a8308ddfd4
TI PCI2030 is a PCI-PCI bridge
2000-01-24 15:49:50 +00:00
29ffb365e2
Use format_bytes to convert drive capacity into human familier string (like
...
sd.c does).
2000-01-24 14:51:07 +00:00
bbd7b89f19
Recognize Linksys USB10T.
2000-01-24 08:47:43 +00:00
50f87c16d8
Regen.
2000-01-24 08:44:33 +00:00
46ada10a40
Add Linksys USB10T.
2000-01-24 08:44:07 +00:00
7b17d59536
Revamp the VAX interrupt handling code. Make it compatible with all the
...
other ports. Clean up some things.
2000-01-24 02:40:28 +00:00
c0214682f7
Add missing \n in attach message, and add a little more information.
2000-01-24 01:32:00 +00:00
9704db4fc4
add driver for raylink/aviator wireless 802.11 FH 2Mbps cards, currently only
...
tested with aviator 2.4
2000-01-23 23:59:21 +00:00
1e33763b41
regen
2000-01-23 23:56:58 +00:00
7527798475
WebGear->Raytheon
2000-01-23 23:55:45 +00:00
3d14a7c591
kluge to make this work with NEC M403 (arc/magnum).
2000-01-23 21:06:01 +00:00
8ac52796d5
add right casts to printf bus_space parameters
2000-01-23 20:44:04 +00:00
1ef6ee50b9
Regen.
2000-01-23 09:55:40 +00:00
9aa167f517
Add Apple KeyLargo and UniNorth.
2000-01-23 09:54:28 +00:00
901082bf1e
Remove code that should not have been added.
2000-01-23 04:02:19 +00:00
75e8c400fa
Add parens so a ?: expression binds correctly.
2000-01-23 00:10:03 +00:00
b176cb0869
Add OPMODE_FD (full-duplex) to the media-related OPMODE bitmask. This
...
will cause the Tulip to be reset when this bit is toggled. This is
apparently required for some chip revs.
From Matt Thomas.
2000-01-22 21:05:53 +00:00
05261ccb43
include "rnd.h" explicitely since the size of sd_softc depends on it
...
(sd_scsi.c and sd_atapi.c missed it, leading to random memory corruption)
2000-01-22 16:35:25 +00:00
dadc2bc21d
pass raw keyboard data unsigned to avoid sign extension
2000-01-22 15:09:00 +00:00
91c88eb52f
PR/9271 (from srp@zgi.com)- recognize (indirectly) HP4000s via density
...
code and do the right QIC type dance (1 FM @EOT, fixed block size).
2000-01-22 04:29:58 +00:00
0b0aecffd6
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:43:10 +00:00
f7c9b87381
Update for sys/buf.h/disksort_*() changes, plus make it compilable on
...
more systems.
2000-01-21 23:41:45 +00:00
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
04b750733c
slight change for platform independence
2000-01-21 21:19:57 +00:00
7faf9d32ea
cleanup SAF-TE attachment code
2000-01-21 21:10:41 +00:00
a914ad6061
- use the raw partition for ioctl; `control device' is gone.
...
- remove `sc_flags' member from md_softc
- add check code whether the md device is configured in mdread/mdwrite
2000-01-21 12:14:53 +00:00
0835b779d1
Simplify sbdsp_pause().
2000-01-20 19:27:03 +00:00
56196ffa4e
Nobody said no to adding a pointer to original scsi inquiry data
...
to the scsibus attach args. Make sure it's nulled for ATAPI. Also,
for scsiconf.c, modify SENA's quirk entry.
2000-01-20 17:10:18 +00:00
3bcc285367
add SES driver
2000-01-20 17:07:41 +00:00
a8f0034523
add SES device
2000-01-20 16:07:43 +00:00
b7868a436d
Don't overwrite cfe->flags.
2000-01-20 08:47:59 +00:00
55c5d10627
Fix typos.
...
Never, never, never commit without compiling first.
2000-01-19 01:16:38 +00:00
fe18229923
Obey the interrupt interval here also.
2000-01-19 01:04:26 +00:00
a97cf3f9ce
Fix a buglet in framelist locking.
2000-01-19 01:02:11 +00:00
3a63eeee63
newline terminate ss: atatch message - from Roger Brooks
2000-01-19 01:00:07 +00:00
8d1b47c24d
Poll the interrupt pipe every 100 ms instead of every 1 ms. The interrupt
...
pipe is only used to collect statistics so it seems rather stupid to bog
down the processor by doing this every ms.
2000-01-19 00:25:23 +00:00
c3716a6bb9
Add an argument to usbd_open_pipe_intr() to specify the polling interval
...
for an interrupt pipe in case we don't what what the descriptor suggests.
2000-01-19 00:23:58 +00:00
331cdec4d2
Add another item.
2000-01-19 00:20:55 +00:00
01c66d1c23
Mute the DAC -- not the master volume -- on close, so that CD passthrough is
...
unaffected.
2000-01-18 22:11:05 +00:00
21863071b1
Move the zeroing of the xfer to the individual methods.
2000-01-18 20:23:42 +00:00
f14036861f
Turn xfer allocation into a method in the HC driver. The reason is that
...
an HC driver may want to subclass the xfer to have additional private fields.
2000-01-18 20:11:00 +00:00
cf3cdae016
iodone() -> biodone()
2000-01-18 19:53:42 +00:00
4cf19b07ea
add the NeXT mouse type
2000-01-18 19:52:50 +00:00
4357bf2625
Pretend we can detach. Then we can at least the detach the device
...
if the attach fails in the middle.
2000-01-18 19:46:55 +00:00
aff651d2c6
Sync with reality.
2000-01-18 19:45:58 +00:00
f21b1ede53
Add a little more debug printing.
2000-01-18 18:49:35 +00:00
24ea998b2a
Regen.
2000-01-18 17:20:32 +00:00
069f019108
Add Aironet Wireless Communications' vendor and product codes.
2000-01-18 17:19:33 +00:00
e716b4ba71
Fix register offset problem. This should make EISA boards work correctly,
...
and is also needed for the ISA frontend (some time this week).
2000-01-18 16:50:38 +00:00
0016706a70
Clean up revision stuff for the sis. Suggested by Chris Cappuccio.
2000-01-18 13:58:07 +00:00
a569e4a38f
Correct URLs.
2000-01-18 13:30:32 +00:00
762741c71d
Fix the size of the playback buffer. Patch from Dave Sainty <dave@dtsp.co.nz>.
2000-01-18 04:48:47 +00:00
9efabde18b
Rearrange ex_intr() to use C_INTR_LATCH the same way the ep driver does,
...
to prevent race conditions.
2000-01-18 03:35:40 +00:00
5253149d51
add mii attribute to xe. (Needed to make PHY attachment work.)
2000-01-18 03:11:11 +00:00
e51ae5d23a
Use SCSIPIRETRIES instead of hard-coded value '2' for number of retries in
...
common routines. Define SCSIPIRETRIES as 4, so that the command will finally
succeed after several consecutive downgrades from UDMA2 to PIO4.
2000-01-17 17:59:48 +00:00
5fe2bec33e
Add Bill Paul's FreeBSD driver for the CATC USB-EL1201A chip.
...
XXX The driver is untested since I don't have any hardware with this chip.
2000-01-17 17:12:20 +00:00
bd2e491091
make confusion of ISO 639 and ISO 3166 less likely
2000-01-17 15:51:59 +00:00
57a4fc9141
Regen.
2000-01-17 14:56:23 +00:00
3285aaa9dc
Add a bunch of devices I found at a Linux site.
2000-01-17 14:56:01 +00:00
28c8d7c7bb
Remove some unnecessary cleanup.
2000-01-17 13:25:22 +00:00
3205164ec5
Add missing USBD_NO_COPY flag.
2000-01-17 13:23:05 +00:00
3e2f6f3a41
Regen.
2000-01-17 12:57:54 +00:00
5ebe8e5553
Add two CATC Ethernet adapters.
2000-01-17 12:57:27 +00:00
2367ad5f3d
add shutdown hook
2000-01-17 12:57:26 +00:00
0f75dd5dc4
allow ioctl() on all scanner device nodes - now SANE can work with ss* driver
2000-01-17 11:25:31 +00:00
e9100143aa
in promisc mode, don't inject outgoing packet to bpf twice.
...
this is because the card gets the outgoing packet from itself in promisc mode
(not really IFF_SIMPLEX).
2000-01-17 07:06:57 +00:00
60e70258d2
Compute packet length correctly (from FreeBSD).
2000-01-17 02:20:43 +00:00
ab81119895
Adjust for ADS name change.
2000-01-17 01:43:31 +00:00
f18750a9df
Regen.
2000-01-17 01:43:07 +00:00
4a3938b0d6
Give the ADS Ethernet adapter a better name.
2000-01-17 01:42:41 +00:00
2ea7029408
Add Bill Paul's FreeBSD driver for the Kawasaki LSI KL5KUSB101B USB Ethernet
...
chip.
2000-01-17 01:38:43 +00:00
ed1996fc7d
Be a little more talkative on with UHCIDEBUG on errors.
2000-01-17 01:01:07 +00:00
638e1a6958
Improve the downgrade logic:
...
- If UDMA 2 is failing try UDMA 1 first, it helps in some cases
- downgrade if we get an error in the first 4000 xfers, or if we get
4 errors in 4000 xfers if the first 4000 went without troubles.
While I'm there commit a local change I have since some time to get my CD
probed: issue a "blanck" IDENTIFY before the one used to detect slave ghosts,
with my drive the first IDENTIFY following a controller reset fails with an
aborted command ...
2000-01-17 00:01:00 +00:00
2ec318c2e5
Update some comments.
2000-01-16 23:18:56 +00:00
cc381bcb7c
Add usbd_reload_device_desc() to get the device descriptor again from a device.
...
Useful if e.g. downloading firmware updates the revision number.
2000-01-16 23:11:43 +00:00
9156026f0f
From chris@openbsd.org:
...
"Don't enable UDMA modes for revisions of SiS 5513 < 0xd0
The only revisions I know which don't actually support UDMA are 0x09 and below..
But the only revision I know which does support UDMA is 0xd0 (and presumably
above that)"
2000-01-16 21:31:28 +00:00
68f1c29b5a
typo
2000-01-16 18:34:42 +00:00
dbed54b091
Get rid of some debug gunk.
2000-01-16 16:07:42 +00:00
1f4b0be350
Turn on interface OACTIVE in case of a transmit error.
2000-01-16 15:52:03 +00:00
48641e166e
Put back line I lost in FreeBSD code when porting.
2000-01-16 15:43:24 +00:00
36987ec1cc
Enable AUE_DEBUG the usual way.
2000-01-16 15:36:28 +00:00
6f571d15c8
Some stylistic changes.
2000-01-16 15:35:06 +00:00
f0cebaeb64
Avoid even more #include for FreeBSD.
2000-01-16 15:12:41 +00:00
ed1c6349a1
Avoid some #include for FreeBSD.
2000-01-16 15:10:27 +00:00
c48388545c
Check for the right vendor/product before fiddling with the Broadcom PHY.
2000-01-16 14:24:33 +00:00
d2d4da8b08
Be consistant when printing haHHBA status.
2000-01-16 14:08:42 +00:00
b4e8010107
Add initial version of a driver for the ADMtek AN986 Pegasus USB to
...
Ethernet chip.
Written by Bill Paul, <wpaul@ee.columbia.edu>, for FreeBSD.
Massaged by Lennart Augustsson.
XXX Needs a thread to avoid a the gruesome USBD_NO_TSLEEP hack.
2000-01-16 13:45:56 +00:00
67ad556c60
Get timeout right in the gruesome hack.
2000-01-16 13:34:51 +00:00
eb7268f16c
XXX Add a temporary, gruesome hack. It allows transfers to
...
XXX be done using delay() instead of tsleep().
XXX This enables transfers to be made from an interrupt context, which
XXX is needed until some more threads are added to the kernel.
XXX Using this hack (which is rare) causes the kernel to busy-wait
XXX for up to 1 ms at splusb().
2000-01-16 13:22:18 +00:00
2b8a0e9b1c
Remove some debug code that was commited by mistake.
2000-01-16 13:14:43 +00:00
537c04e5ee
Add a flag, USBD_FORCE_SHORT_XFER, to transfers. Using this flag will
...
force the last packet of a transfer to be smaller than the maximum
packet size. The only time this matters is if the transfer size is
a multiple of the maximum packet size, in which case a 0 length packet
is sent last.
Some weird devices require this behaviour to determine the end of
a transfer.
2000-01-16 13:12:05 +00:00
d837d7a740
Avoid freeing already free data when attach fails.
2000-01-16 13:05:48 +00:00
9b9e6e6d2c
GC an unused typedef.
2000-01-16 11:19:05 +00:00
f17d5fe839
Change compat defines a little for power hooks.
2000-01-16 10:38:58 +00:00
9e5ce08183
Add framework for doing isoc transfers. The actual scheduling code
...
is still missing.
2000-01-16 10:35:24 +00:00
1a080201cc
Add shutdown hooks to ensure that the host controller is halted when
...
a reboot occurs.
2000-01-16 10:27:51 +00:00
98347a7628
Add comments.
2000-01-16 09:43:43 +00:00
5a91238d5f
Turn on more debugguing flags with USB_DEBUG.
2000-01-16 09:42:36 +00:00
4539a83cdc
Add a DPRINTF on keyboard errors.
2000-01-16 09:41:22 +00:00
5522f8f3ba
Add some files for ethernet adapters (the files are not there yet).
2000-01-16 09:40:07 +00:00
c664f35fc5
Let usbd_set_polling() work on a usbd_device_handle instead of
...
a usbd_interface_handle.
2000-01-16 09:37:18 +00:00
9647c5b871
Another compat define.
2000-01-16 09:34:18 +00:00
d50156f1bd
Start of implementation of UpDown processing unit control.
2000-01-16 09:32:56 +00:00
a9e57ac54d
Fixes for 21143 and MII in full-duplex mode.
2000-01-15 18:39:31 +00:00
c02df4a16e
Typo. Don't worry, nothing that will cause system instability or data
...
corruption.
2000-01-15 18:13:22 +00:00
d2d9ade964
Validate EATA signature in returned EATA configuration data before anything
...
else. More proper than important.
2000-01-15 18:10:32 +00:00
494dc92eb1
allow french keyboard users to swap control and caps lock keys
2000-01-15 17:14:22 +00:00
thorpej