ETA might be over and will appear to drop rapidly, rather than being under
and appear not to change. the original code makes sense when you're testing
by suspending & resuming the client. however, the unfudged number is probably
better in reality, especially for slow spurty networks.
requested by ITOH Yasufumi <itohy@netbsd.org> in [bin/7977]
lpage page local files
pdir as dir, but through your $PAGER
pls as ls, but through your $PAGER
* implement docase() (a la dotrans() et al) and use appropriately, rototilling
some duplicated code
* globulize(): modify to return a pointer to the strdup()ed result in all cases,
and hack the code that calls it to take this into account
* replace strcpy() and strncpy() with strlcpy()
* put(), getit(): use some aptly named local vars instead of argv[...]
* delint
prototype for idle() in <unistd.h> (which i thought was against namespace
and sensibility guidelines, but...)
* consistently use xsignal() instead of signal(). we get known behaviour
in all cases (SA_RESTART), which is good for some borken foreign systems.
* remove signal.h from most files; it's unnecessary now
* fetch_url(): use `long chunksize' instead of ssize_t; it's more portable, and
we're setting chunksize with strtol() anyway
* xsignal(): only use SA_RESTART if it exists. SunOS 4.x doesn't have it
but has the inverse (SA_INTERRUPT). the original function i was inspired
from had this support (lib/signal.c, W. Richard Stevens' `UNP 2nd ed Vol 1').
* remove <termios.h> from util.c; it should be unnecessary now
it's more portable and more obvious
* remove the mkgmtime() && HAVE_TIMEGM stuff:
a) why should netbsd have to define HAVE_TIMEGM to compile cleanly?
b) foreign compiles of ftp should just be linked with working
timegm function
a more portable version of this ftp client will be released as a 3rdparty
product; no use polluting our code with half-baked attempts...
add lots of comments about how to size up the buffers, and add extra
checks to hopefully ensure that there won't be an overflow (unless
someone modifies the length of the sprintf()s).
* as part of the above, slightly rework the way the `*' bar is calculated.
also fixes a display bug when > 160 stars were needed to be printed.
the maximum progress bar width at this time is 256.
* remove some code that checks the port that was #if 0-ed out as part of the
ipv6 migration; it's not going to be used again.
* document the above three commands
* rototill the way the sndbuf and rcvbuf work. remove resetsockbufsize()
* use the appropriate socket buffer size as the size of the buffer that
the read()/write() loops use. speeds up things in some cases.
the an empty directory (e.g, between `some' and `path' in
`ftp://host/some//path'), then execute `CWD ' (without a path).
This command will probably fail on rfc 959 compliant servers, so
issue a warning in this case and bail. [noted by cgd].
(i wonder if the people who wrote rfc 1738 actually realised that this
requirement appears to contravene the spec for `cwd' in rfc 959 ?)
* replace isurl() with isipv6addr(), and use appropriately. fixes
auto-login with `classic ftp URLs' (e.g, `ftp somehost:')
* cleanup and rework some of the ipv6 stuff in parse_url()
* prevent potential coredump in fetch_ftp() when parsing `;type=X'
* KNF a few lines
* fix a couple of comments
* cleanup the man page a bit
features:
---------
* transfer rate throttling with the new `rate' command. syntax:
rate direction [max [incr]]
where direction is `all', `get' or `put'.
if max is not supplied, the current settings are displayed.
if max is supplied, then transfers in the given direction will
be throttled to this value.
if incr is supplied, the increment for the `on-the-fly' scaling
will be set to that, otherwise `1024' is used.
currently implemented for binary get, binary put, and url fetches.
not yet supported for ascii get or put, or local file copies.
* on-the-fly scaling of the throttle based on signals:
- SIGUSR1 raises the throttle rate by the increment for that direction
- SIGUSR2 lowers the throttle rate by the increment for that direction
* -T dir,max[,incr] option to set rate from the command line
* `k', `m', `g' suffix support for bytecounts in the `hash', `rate',
`rcvbuf' and `sndbuf' commands)
bug fixes and code mods:
------------------------
* fix up ftp_login() so that ruserpass() is always called, even for
command-line url fetches.
* implement strsuftoi(), which parses a given number into a int with
suffix support. replaces getsockbufsize()
* implement parserate(), which does the argv parsing for -T and rate
* save and restore errno in signal handlers (may not be necessary, but
it doesn't hurt)
notes:
------
the rate command has had reasonable testing, but I'd like feedback
if it doesn't do the right thing, especially from people on slower
(i.e, modem) links.
I haven't tested the rate throttle against a http server which does
`transfer-encoding: chunked' because I couldn't find a server to
test against.
transfer stats are printed when verbose is enabled even if ftp is compiled
with -DNO_PROGRESS/-DSMALL. this adds back some feedback that existed
in traditional ftp that was lost when i added the progress meter. (noticed
when ftp-ing from the -DSMALL version of ftp that's on the 1.4 boot floppy)
NO_PROGRESS. -DSMALL still implies all of those. progress meter support
isn't necessary for the smallest possible ftp client, but it adds very
little space and makes users' lives much better. Therefore, it should
be enabled for installation media if at all possible.
the latter only seemed to work for TIS Gauntlet and not TIS fwtk.
thanks to simonb@netbsd.org for testing this. fixes [bin/5556].
* if EOF (e.g, ^D) is entered at a username/password/account prompt which
happens to use fgets(), exit the login rather than treating EOF as CR.
* don't use the comma operator where separate statements are valid
* always use snprintf to copy stuff into malloced buffers, just in case
typos creep in and mean that the buffer ends up being overflowed
.netrc entry exists for the host with a valid user. noted by
Frederick Bruckman <fb@enteract.com> in [bin/7477]
* fix a minor memory leak associated with calling ruserpass() with
an empty user, password, or account.
calculations need to occur to prevent the calculated xfer rate from being
too fast if ftp(1) is backgrounded for a while during the xfer.
bug found by thor lancelot simon <tls@netbsd.org>.
* implement ftpvis(), which \ quotes the following in the given string:
SP, TAB, \, CR, "
* use ftpvis() in complete_ambiguous(), to escape characters in a word
which would confuse makeargv()/slurpstring().
* set setvbuf(ttyout, NULL, _IOLBF, 0) and remove a bunch of fflush(ttyout).
* use fwrite() instead of write() for progressmeter (don't intermix stdio
with non stdio ops)
1. changed to use timegm(3) on NetBSD and
2. supply alternative code for other Unix-like OSs
(NetBSD ftp shall be portable for some reasons :-).
This fix closes PR #6448.
NOTE: This should be fixed again if a portable UTC to time_t
conversion method is specified in some standards.
* fix up progress meter display for files once > ~20.47MB has been
transferred. (noted by darren reed)
* use xsignal() for SIGWINCH, so window resizes don't abort xfers on
drainbamaged systems.
* don't assume that TIOCGWINSZ returns a non zero width.
* support $no_proxy, which is a comma or space separated list of
host[:port] elements for which proxying is to be disabled.
(asked for by cgd in [bin/5027])
* if $FTPANONPASS is defined, use that as the anon ftp password
(instead of "`whoami`@")
* allow http URL's without a filename as long as an output file
is specified.
other stuff:
* implement parse_url(), which breaks up a URL into its bits, and use.
* simplify url_get() and auto_fetch() to use parse_url() and to not
modify the supplied URL or a copy of it.
* implement xmalloc() and xstrdup(); error-checked malloc()/strdup()
* add more consistency to messages, quoting strings in output as `%s'
remove server from using a persistent connection, which speeds
up such requests.
* support http 301 and 302 redirects
* rewrite guts of url_get() to use fparseln() et al instead of
read(s,&p,1)... enables each in the header to be parsed
as necessary
* rename login to ftp_login, to remove conflict with util.h::login
* cleanup verbose messages during http proxy requests
which in turn can allow the use of larger TCP windows. This is a work in
progress; there is not yet support for specifying global defaults or
user prefrences on a host/network basis.
- ensure hostname from gethostname() is nul-terminated in all cases
- minor KNF
- use MAXHOSTNAMELEN over various other values/defines
- be safe will buffers that hold hostnames
* default to passive with active fallback. $FTPMODE modifies this behaviour.
-A forces active connection.
* support '-o outfile' for auto-fetched files. outfile can be a file,
`-' (for stdout), or '|command' (to output each file through command).
* support '-r waittime', which retries the connection after waittime seconds
if it fails.
* fix 'page file' when restart is non-zero.
* try all ip-addresses of a host in a http fetch (as the normal ftp fetch
does).
XXX: a ``broken pipe'' error sometimes occurs with -o '|command';
i haven't tracked this down yet.
SIGINFO and at the end of the transfer):
* display time taken as [[x days?] hh:]mm:ss
* display ETA as [hh:]mm:ss
* print ' (stalled)' if the transfer is stalled
doesn't use garbage for the username. from "Soren S. Jorvang" <soren@t.dk>
in [bin/4559]
* use in_port_t for ports, and USHRT_MAX instead of 0xffff
(from millert@openbsd.org)
* use `NULL' instead of `(.... *)0' where appropriate.
lukem