driver (and for eventual synchronization w/ Sam's enhancements to
FreeBSD).
From dyoung@netbsd.org, factor ieee80211_create_ibss and
ieee80211_match_bss out of ieee80211_end_scan for re-use in the
forthcoming ADM8211 driver.
Define two new status codes for management frames.
Define 802.11 durations of important frame sequences, as will be
needed for ADMtek ADM8211 driver and others.
saving bit is set in incoming frames from a station, and buffers the
outgoing frames for the station until they are polled for. This
requires support in the driver to set a bit in the TIM bitmap sent
during 802.11 beacons.
So far, support for power saving in Host AP mode is only available
for the PRISM2 chipset.
<kml@patheticgeek.net>.
This patch does NOT add monitor mode support for the Lucent radios.
awi(4) was only modified for compatibility with the new mediaopt.
It does NOT support monitor mode.
Tested by Kevin, Daniel Carosone, and I.
Change the name for the size of driver private structure:
ic_bss_privlen -> ic_node_privlen
Add a hook to free node for the driver private structure, though there are
no consumer of the structure in the tree for now.
correctly. To avoid massive extra code in each driver, now if_iee80211subr.c
also handles non-standard old lucent adhoc-demo mode.
This also fixes PR 14227.
Change the name of structure ieee80211_bss to ieee80211_node, which is
used for management of stations in hostap mode, and peers in ibss mode.
Split off ic_opmode, ic_phytype from ic_flags.
Preparation to merge 'wi' driver into 80211subr.c.
* SIOCS80211CHANNEL, SIOCG80211CHANNEL -- set/get the 802.11 channel.
* SIOCS80211BSSID, SIOCG80211BSSID -- set desired/get current BSSID.
From David Young <dyoung@ojctech.com>.
- aging ang clear inactivity stations
- DTIM field in beacon/probe response.
- ignore IFF_PROMISC for hostap mode, since 802.11 has 3 address fields,
so that promisc mode is not required for AP function.
XXX: FH chanset should be calculated by FH hop pattern, but BayStack 650 AP
always specify chanset to fixed value 1. The previous code try to this
hack into awi driver, but it is insufficient because the chanset value
in awi driver may change while scan and it may be different from the
value in receiving beacon/probe-response. So we save encoded FH chanset
into channel in 802.11 common bss information for now.
if_ieee80211subr.c, which can be shared between any IEEE 802.11
drivers.
However, most of current working IEEE 802.11b wireless LAN cards
have rich firmware and we cannot have a control to management frames
for such cards.
IBSS creation is now supported for the awi driver.
u_int8_t array to struct ieee80211_nwid to prepend length field.
The length field is necessary because IEEE 802.11 spec doesn't prohibit
even '\0' for SSID.
Though the name and the value of SIOC... macro is unchanged, this change
breaks binary compatibility. The only affected userland program on the
tree is ifconfig(8).
As Jason suggested on tech-net, it is better than live with problems
since there are no releases for this ioctls yet.
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
