3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
883ff3e7f3
Changes from Walter Ruetten for P550 support.
1996-02-28 04:14:05 +00:00
92c6f5f0ee
Get rid of some unneeded constants.
1996-02-27 03:29:16 +00:00
6ec37fa3df
Use IOBase instead of INTIOBASE.
1996-02-27 03:25:47 +00:00
db2f33c640
Clean out some unneeded constants.
1996-02-27 03:23:42 +00:00
1dcd5f9d15
For a bus error in nofault, if it's an 040, load the address from the
...
correct frame offset. This is required for the 5380 driver to work
properly.
1996-02-27 03:17:00 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
568f862aeb
PR 2111: Do not update system clock until we can keep more accurate time.
1996-02-23 12:40:37 +00:00
738faf922f
Add ^^ and ^_ codes to default keyboard layout
1996-02-23 05:43:48 +00:00
946696f064
Add m68k/db_memrw.c
1996-02-22 23:35:07 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
89179744bd
Use unsigned variables to calibrate delay_factor.
1996-02-22 02:04:14 +00:00
5fd93a11ca
Clear interrupt before enabling in calibrate_delay() (from John P. Wittkoski)
1996-02-19 21:40:48 +00:00
8fe7b2bbb7
Be a bit more careful when setting up the timer for calibrating delay().
1996-02-19 05:20:54 +00:00
ab3f741911
Update to latest Atari driver, but with some local modifications.
1996-02-19 02:51:03 +00:00
2efbb04ae0
Make delay() match prototype.
1996-02-17 19:23:03 +00:00
f851e3e8b3
Move spl stuff from param.h to psl.h. Prototype delay() in param.h.
1996-02-17 14:50:40 +00:00
946dc72362
Get d_npartitions right.
1996-02-14 14:20:54 +00:00
ef9b75f679
HZ used to be in Makefile.mac68k... It is 60 on the mac, not 100.
1996-02-14 04:26:38 +00:00
9401e46ed0
Change readdisklabel to check block 0 of the disk for a Macintosh magic
...
number before attempting to load the Macintosh partition info. If the
first 32-bits of block 0 contain the BSD disklable magic number, treat
it as a NetBSD disklabel.
When loading the Macintosh partition map, check the first 32 partitions
for the root, usr, and swap partitions--instead of the first 8. Still
only allows 8 total partitions for NetBSD use.
1996-02-11 22:31:47 +00:00
d03a91c75f
KNF-ified by Scott Reynolds a long time ago.
1996-02-11 15:23:19 +00:00
4323ae0307
Remove via_inited, as it is unused.
1996-02-11 01:20:46 +00:00
6945798b81
Correct ROM vectors for the LC 475.
1996-02-11 01:20:37 +00:00
ffc19f58b0
Back out last change. Bad karma to initialize the VIA that early.
1996-02-11 01:20:23 +00:00
0ae8a51904
PETE was pretty useless; SPOT is my own machine, and will better
...
reflect the status of sbc driver configuration.
1996-02-11 00:17:13 +00:00
af4f29bcb3
Identical to GENERIC, but uses the `sbc' driver.
1996-02-10 23:42:31 +00:00
ed73ac3b48
New SCSI driver for Macintosh II family machines, implemented using
...
the MI 5380 driver. It has been verified to work on the IIx, IIsi,
and IIci only, but should work with any Macintosh 5380-based SCSI
controller.
- This driver is _not_ intended to be a general purpose replacement
for the `ncrscsi' driver. It is an alternative for those having
problems with that driver.
- Disconnect/reselect doesn't (yet) work, so don't expect SCSI tape
or magneto-optical disk drives to function properly.
1996-02-10 23:28:41 +00:00
01c43471b9
Make a message more verbose for folks who try to boot in 24-bit mode.
1996-02-10 23:12:46 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
3c8605f0f7
Add sbc driver.
1996-02-07 16:34:28 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
2a878c9a3a
Move debugging defines, etc. into mac68k5380.c and use them instead of
...
something similar but different. Make a few cosmetic changes.
1996-02-03 23:17:53 +00:00
3d8d566948
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:50:22 +00:00
6b6a46ed2f
Implement mac68k_register_via1_t1_irq(). Also, remove via_inited warning.
1996-02-03 22:50:19 +00:00
d13a039f24
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:49:52 +00:00
20123d5253
O2 breaks on this port. Use -O until we can fix it.
1996-02-03 15:14:39 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
5336dade8e
Force the talley counters to be read when we get the interrupt. GCC was
...
nicely optimizing the reads out for us. Kudos for this one go to
Steven R. Weiss <srw@hvcn.org>.
1996-02-02 15:30:56 +00:00
cec913603e
Don't special-case conf.c.
1996-02-02 13:38:05 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
af9bcab2ce
Clean up and comment a bit.
1996-02-01 03:40:26 +00:00
cde62d494a
Fix for delay(usec) for small usec. From Scott Reynolds <scottr@edsi.org>.
1996-01-29 04:10:00 +00:00
229c36d3dd
Patch a few of the holes in the machine-dependent part of this driver.
...
Sync the m.i. part with the Atari.
1996-01-24 06:02:06 +00:00
1fd44da3df
Change an &= to an & -- the former stopped working for some reason
...
that I need to delve into when I have time.
1996-01-24 05:52:58 +00:00
af016e6224
Updates from Kelly Campbell <camk@ksu.ksu.edu> for some ROM addresses.
1996-01-15 12:29:48 +00:00
57219ebad3
Remove vnode_if.[ch] during a "make clean", per PR#536 from
...
Dan Carosone <danielce@ee.mu.oz.au>.
1996-01-14 21:06:47 +00:00
cgd