fd25fd5a19
Add a `-d' option to force a dump. From John Kohl.
1995-10-05 05:36:21 +00:00
9b746f76a4
Add code to look at the existing partition entries to deduce the
...
translated geometry of the disk. This code will only change the
disk geometry if it can find a geometry which is consistent with
all partition entries, so it's very conservative about choosing
a new disk geometry. Under some circumstances, it will choose a
number of cylinders which is a little lower than it needs to be,
but this code is enough so that you can create new partitions
with the correct physical addresses.
The right solution to this problem is to have the boot loader
communicate the BIOS geometry of each disk to the kernel, in a
manner similar to the symbol table, and then provide a kernel
interface to get at that information. I'm unfortunately not
really qualified to make such a change, and I want something
that works better than the status quo.
1995-10-04 23:11:19 +00:00
db3185152f
Fix typo (from Mark Weaver PR#1556);
1995-10-02 19:47:11 +00:00
0e91488536
Prevent loop in SIGCHLD handler (Frank van der Linden; PR#1539).
1995-09-30 11:39:53 +00:00
b12a0162d9
Fixed example. The "-o -b" flags aren't needed unless the arguments
...
(directory and uniondir) are swapped. (PR #1469 ).
1995-09-29 06:44:02 +00:00
a2784ea2fb
Changed to write the first 1k bytes that includes the disklabel and
...
the boot image information. For some reason, a lseek and write of
just the image information scrambled the disklabel. Since we have
a copy of the entire first 1k, just write it.
1995-09-28 07:08:49 +00:00
2a549b83f7
Fix the case where stat() fails, so that the file system is still unmounted.
1995-09-22 02:03:48 +00:00
c94617858b
Just use umask(0);
...
Use mktemp() for temporary file creation.
1995-08-25 11:35:35 +00:00
4edc2f666b
Ensure the hints file is readable.
1995-08-25 10:10:15 +00:00
32b3e66891
New way to calculate load address from Matthias Pfaller.
1995-08-25 05:11:36 +00:00
38634f3a18
Fix up a printf(), from Chris P. Ross.
1995-08-23 01:06:59 +00:00
1f3a168f04
Call mount_ffs instead of mount_ufs; PR #1379
1995-08-22 19:58:33 +00:00
aabb577203
add adosfs.
1995-08-19 16:08:05 +00:00
d014b18a86
Remove junk (from Masanobu Saitoh; PR#1378).
1995-08-18 15:01:19 +00:00
28aa17e348
Add missing commas (from Masanobu Saitoh; PR#1377).
1995-08-18 14:51:35 +00:00
3376de53d9
Build ccdconfig.
1995-08-17 16:38:53 +00:00
9a422ea24a
Configuration utility for the ccd.
1995-08-17 16:37:17 +00:00
f091151dc9
don't complain about errors opening 'on' ttys, if the error is ENXIO.
1995-08-13 05:24:03 +00:00
705e61651e
fix a couple of bugs pointed out by John Birrell, though fix some
...
differently he did. (1) don't assume that the timeval in
the packet is correctly aligned, (2) don't compare beyond the end
of the packet, (3) minor cast for printf happiness.
1995-08-11 22:37:58 +00:00
ea00559d41
Convert to use err(3)
1995-08-11 00:08:18 +00:00
7320c39038
makedev(8) -> MAKEDEV(8); PR #1306
1995-08-10 23:47:32 +00:00
9df0a9a560
Add boot_sun3.8
1995-08-08 20:46:20 +00:00
8920da128d
Parse library names better; takes care of PR#1291
1995-08-05 00:16:36 +00:00
34f94f0c70
Add and document options -w (to specify a maximum wait timeout, useful
...
for testing network interfaces) and -S (to specify a source address
on a machine with multiple interfaces).
1995-07-27 23:49:07 +00:00
83b019efaa
set dumpsize in dump_exists(), not save_core(), so that minfree check
...
works again. solves pr 1257, but sets dumpsize earlier than suggested
in that pr, so that dumpsize is set if a core doesn't appear to be
present (because dumpsize would be used if the '-f' flag is given).
1995-07-24 20:35:02 +00:00
a2465235f4
RIP address families are still 2 bytes
1995-07-24 13:03:25 +00:00
68b7908bf9
Fix bugs cgd pointed out.
1995-07-13 23:20:10 +00:00
3f230414c7
fix a stupid bug; wrong size was being used for sin_len.
1995-07-13 10:43:23 +00:00
7e0beb510f
clean up (GRAMMAR POLICE!), removed references to now-nonexistent
...
loopback file system (fixes pr 955, but more thoroughly).
1995-07-12 07:08:27 +00:00
3f9f3ddd4e
update docs to match the code.
1995-07-12 06:23:21 +00:00
f03626292f
fix a goof in my previous code, that i thought of while reading pr 749.
...
add a -A flag, which does the same thing as '-a', but doesn't check for
remounts.
1995-07-12 06:05:04 +00:00
a8592b0dd1
add mount_ffs(8). reorganize, to seperate the file system mount commands,
...
and to make it more clear what programs are dependent on a particular file
systems's format.
1995-07-12 03:50:27 +00:00
7fa5edba63
split FFS mount code out of mount(8). the correct way to name fast file
...
systems is now 'ffs', though 'ufs' is tolerated in fstab for backward
compatibility.
1995-07-12 03:46:47 +00:00
723ca902ed
remove FFS mounting code from mount(8); there are now _no_ 'internal' mount
...
types. when using mount(8) with '-a', do _NOT_ remount file systems
that have been mounted once already. (This cannot be 100% precisely
determined (thanks to mfs, union fs, and similar file systems which
don't use a 'real' mounted-from node), and changed options cannot be updated
with mount -a. however, options wouldn't be updated with the old mount -a
anyway, and this solves several annoyances.
1995-07-12 03:45:09 +00:00
e85da9ab29
recognize 'ffs' and 'ufs' as meaning the same thing.
1995-07-12 03:39:53 +00:00
5f6a15bcbe
implement a 'force check' flag, '-f'. I used the SunOS name, but the Digital
...
semantics. now:
(1) dirty file systems will always be checked; nothing new there.
(2) if not '-f' clean file systems will _NEVER_ be checked,
i.e. they won't be checked even if -p isn't specified. This
allows one to 'fsck -p ; fsck' to preen, then clean up
anything that 'fsck -p' barfs on, without waiting for the
clean file systems to be checked again.
(3) if '-f' clean file systems will ALWAYS be checked. This
allows people to put 'fsck -fp' into /etc/rc on systems
where they're leery of the FS clean flag state, need
the extra reliability, and can afford time 'wasted'
in checks.
The assumption made here is that if a file system is marked clean, it
_IS CLEAN_, really, and shouldn't be checked unless fsck is explicitly
told to (with -f). This should be a valid assumption, but may not be in
the presence of file system bugs. Documentation updated to note '-f'.
1995-07-12 01:49:16 +00:00
92174a19ea
Give an argument to the warning message for when realpath() fails.
1995-07-04 23:41:33 +00:00
49c06cb6c4
Reorder man page sources in makefile (alphabetize) and
...
add boot_mac68k.8.
1995-07-02 02:09:50 +00:00
d535998d4b
Use sysctl() to determine maxpartitions. Fixes pr #970 .
1995-06-28 02:21:02 +00:00
beabc1186a
Note the proper name for the core file instead of vmcore, and note the
...
names used when the -z option is present.
1995-06-27 22:40:46 +00:00
68ad3878b1
sys/signal.h -> signal.h
1995-06-26 23:26:23 +00:00
45bcb4b8c3
sys/errno.h -> errno.h
...
sys/signal.h -> signal.h
1995-06-26 23:17:26 +00:00
1ce78f01c4
fix verbose printf of dumplo, clean up printfs slightly
1995-06-25 06:28:13 +00:00
a8973a1752
specify precision, not minimum field width. pointed out by John Kohl
1995-06-22 11:15:14 +00:00
21258bad26
Allow exporting regular files.
1995-06-22 02:37:38 +00:00
d8f640e15a
Add a `merge' option.
...
Use err() & warn().
1995-06-20 23:12:33 +00:00
4841cf2927
- Support rip version 2.
...
- Add ansi prototypes.
- Be less internet centric.
- Convert queues to use <sys/queue.h> so we don't need -lcompat
1995-06-20 22:25:51 +00:00
54f83183c8
posixification of 'stat' structure
1995-06-19 21:30:36 +00:00
dd12858b36
stat structure POSIXification
1995-06-19 00:20:11 +00:00
93a2f4ea60
update for posixified stat structure
1995-06-18 21:35:33 +00:00
3d113b326b
don't assume f_fstypename is larger than MFSNAMELEN or is nul-terminated
1995-06-18 10:58:06 +00:00
5827156eb1
Back out previous change.
1995-06-11 05:28:52 +00:00
ae16273156
Back out previous change.
1995-06-11 05:16:04 +00:00
f477ccbfa7
Fix def_anon initializer.
1995-06-09 05:26:58 +00:00
061f2a0c7e
fd_set *'s really aren't compatible with timeval *'s
1995-06-08 12:38:07 +00:00
788733b7a9
typeof(timeval.tv_sec) != time_t
1995-06-07 17:14:21 +00:00
b5e03e8dd4
Fix debugging printf.
1995-06-06 19:54:30 +00:00
d6b0d0788c
Use setegid() explicitly, just to be safe.
1995-06-06 19:53:34 +00:00
7a4a8b6c81
Make sure the SIGHUP handler is actually set. Zero the fd_set before using
...
it.
1995-06-06 19:51:19 +00:00
27093b3eba
Fill in sin_len.
1995-06-03 23:23:52 +00:00
7f26bb202e
Set cr_gid properly, and adjust for getgrouplist() change.
1995-06-02 21:04:24 +00:00
06514eb892
Took away use of vax inline functions. Didn't work anyway.
1995-05-31 20:44:35 +00:00
f4d4fdf315
Make boot_pmax man page. (from jonathan)
1995-05-31 16:46:07 +00:00
53388641d7
Add missing option in example.
1995-05-30 09:09:39 +00:00
470a6be999
<sys/errno.h> -> <errno.h>
...
<sys/signal.h> -> <signal.h>
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:37:32 +00:00
9f28755bff
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:31:01 +00:00
628bd54eb0
this file should be dead.
1995-05-28 05:28:55 +00:00
4d2a8bbae7
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:27:20 +00:00
ec38846844
sys_siglist[] -> strsignal()
1995-05-28 05:25:34 +00:00
afea82ff3c
<sys/errno.h> -> <errno.h>
1995-05-28 05:21:58 +00:00
2b3cba51fb
s/an active/a passive/
1995-05-24 15:55:02 +00:00
312851eab6
Format police.
1995-05-24 15:54:00 +00:00
1f1b61fc49
Fix bug in af_format where the formatted address was returned in the same
...
static buffer. When af_format is used more than once in the same printf
statement, the second call will overwrite the first. Changed af_format to
take a buffer and the buffer size where to place the formatted string.
1995-05-24 15:22:52 +00:00
9cd5391535
Use inet_aton(), not inet_addr().
1995-05-21 15:33:22 +00:00
b581b3e588
Use inet_aton(), not inet_addr().
1995-05-21 15:17:13 +00:00
10f79d3be3
Use inet_aton(), not inet_addr().
1995-05-21 14:22:23 +00:00
6d4cde278d
Use inet_aton(), not inet_addr().
1995-05-21 01:18:03 +00:00
7888507f63
Use inet_aton(), not inet_addr(). Suggested by John Hawkinson.
1995-05-19 20:17:16 +00:00
11b0070a5f
don't build netgroup(5) here.
1995-05-11 23:15:22 +00:00
be68575548
don't build netgroup(5) here.
1995-05-11 23:15:05 +00:00
2d709c7062
flush stdout instead of stderr, so that each block number is displayed
...
as it is printed. From PR 989.
1995-05-06 06:55:34 +00:00
c8338a3451
Remove xref to mount_lofs and add xref to mount_ados and mount_msdos.
1995-04-30 20:42:12 +00:00
f6f6145e7f
Make sure to reset signal mask on errors.
1995-04-29 22:42:07 +00:00
7b8bdc7ae5
pmax boot documentation
1995-04-25 23:55:11 +00:00
7d07096c42
Bits from old reboot_sparc.8 man page.
1995-04-25 11:37:25 +00:00
2fe1f93ac5
fix arguments to tracing functions and/or cast, to avoid warnings.
1995-04-24 13:24:30 +00:00
53f540575f
fix initializer
1995-04-24 13:23:52 +00:00
2d9ea442e5
fix array types to match what the file system wants.
1995-04-24 13:23:11 +00:00
c39f186d60
Changed to use only one bootblock file on VAX.
1995-04-23 19:27:59 +00:00
cc345dc38d
remove these (deprecated) files. port maintainers were warned about
...
their impending disappearance a while ago; they can still be retrieved
from the attic.
1995-04-23 10:58:38 +00:00
555d4b510e
slightly clean rcs ids, etc.
1995-04-23 10:33:03 +00:00
dfb2f56868
if no packets were received, exit with status 1. this should be
...
documented somewhere. As suggested by Rens Troost.
1995-04-22 15:27:08 +00:00
6f98502ae2
Interface-specific routes can be static.
1995-04-20 20:52:46 +00:00
22ecc6ab1a
Implement the document `-llinfo' flag.
1995-04-20 17:39:17 +00:00
5bc2528656
route.o, not route, depends on keywords.h. from jhawk@mit.edu; pr 978
1995-04-19 09:08:28 +00:00
f66d5868d5
Added vax for 2-file boot blocks.
1995-04-18 22:37:46 +00:00
5b613aff01
Remove extra `break;'.
1995-04-18 03:14:18 +00:00
5a76ea02ce
Set the `clean' flag.
1995-04-12 21:24:31 +00:00
7cb70c9889
Set the clean flag if necessary. If preening, don't check `clean' file
...
systems.
1995-04-12 21:24:07 +00:00
7bffa9e3f0
Print out the `clean' field.
1995-04-12 21:23:24 +00:00
mycroft