wiz
611461bc5e
memcpy -> memmove. Noted by Tsubai Masanari.
2001-07-22 13:21:04 +00:00
wiz
0ef3731e14
Replace memcpy's of obviously overlapping regions with memmove.
...
Noted by Izumi Tsutsui.
2001-07-22 13:08:09 +00:00
wiz
c5a6be17f4
bcopy -> memcpy, bzero -> memset, bcmp -> memcmp.
...
Reviewed by Matt Thomas, ok'd by Tsubai Masanari.
2001-07-22 11:29:44 +00:00
sato
c84f4a5476
adhoc battery event creation for some vr machines.
...
XXX: temporary
this file is needed with vrpiu.c rev1.14
2001-07-22 10:40:09 +00:00
takemura
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
jdolecek
044d2dfafc
Move former PS2 config to GENERIC_PS2, mostly so that it fits the
...
installation snapshot build machinery well; also improve some comments.
Adjust INSTALL_PS2 config accordingly.
2001-07-21 16:26:46 +00:00
jdolecek
c55c49e5e3
Make a bit more like GENERIC - add I586_CPU, NTP, SYSVMSG, SYSVSEM, LKM,
...
CD9660, INET6, though bunch of entries enabled in GENERIC is commented out,
mostly due they being not appropriate for IBM PS/2.
2001-07-21 16:12:16 +00:00
jdolecek
f2b42af4c6
dev/isa/if_ate.c depends upon 'ate_isa', not just 'ate'
2001-07-21 16:08:17 +00:00
takemura
0f960df346
- delete sc->sc_screens[]
...
- BUGFIX: hpcfb_alloc_screen clears real frame buffer
- Doesn't allocate any screen in attach routine
2001-07-21 14:49:58 +00:00
jdolecek
c013461507
add pcmb\*
2001-07-21 13:22:05 +00:00
jdolecek
230adf61d8
Installation kernel for PS/2 machines. Only wrapper around
...
PS2 config.
2001-07-21 13:16:23 +00:00
jdolecek
0be60fb28d
remove MEMORY_DISK_HOOKS stuff
2001-07-21 13:15:00 +00:00
itojun
2990097219
repair validation on RTAX_GENMASK insertion. has been broken since 44bsd.
...
(freebsd3 has a fix since 1999, but has insufficient validation on sa_len)
2001-07-21 12:20:36 +00:00
ichiro
3cd8eb40b0
support to change of CRTSCTS
...
change uplcom_reset parameter
2001-07-20 21:03:41 +00:00
itojun
7f070caa75
sync rt_ifp check with IPv4 counterpart (see sys/net/if_ethersubr.c 1.27).
...
sync with kame
2001-07-20 20:26:35 +00:00
itojun
866fc79bb9
validate sa_len on equal() macro. without the change we may touch the content
...
of a2 beyond a2->sa_len mistakelnly. sync with kame
2001-07-20 18:52:18 +00:00
ichiro
025f122394
use definition of memory size for physical area
...
0x20000000 -> SH3_P1234SEG_SIZE
2001-07-20 14:19:59 +00:00
thorpej
bb93036fa9
Regen.
2001-07-20 07:07:28 +00:00
thorpej
959f6ee3f3
Adjust for the corrected Marvell entry.
2001-07-20 07:07:05 +00:00
thorpej
38f94a6fbe
Bleh, I don't like the way our miidevs works now. Repair the
...
Marvell Semiconductor entry.
2001-07-20 07:06:42 +00:00
thorpej
7859dd206a
The EEPROM registers/bits are different on the Corkscrew (3c515). Adjust
...
for this.
2001-07-20 05:44:48 +00:00
thorpej
9bf4afa0b6
Add the ISA Bridge ASIC registers found on the Corkscrew (3c515).
2001-07-20 05:43:11 +00:00
hpeyerl
7ef32026cd
make slash, backslash, question, and pipe (bar?) keys work on US Jornada
...
keyboard.
We still don't have {}[]`~ since these require the 'fn' key modifier. Same
with num-lock, caps-lock or funky british currency symbols.
2001-07-20 04:28:50 +00:00
eeh
1fead733d9
PCI overhaul.
2001-07-20 00:07:12 +00:00
eeh
93d4ebfb55
Don't fall over if the TOD clock could not be found.
2001-07-19 23:59:51 +00:00
eeh
7e8421fa5b
Also attach apropriate devices named "serial".
2001-07-19 23:55:50 +00:00
eeh
0c4549ab71
Don't bother flushing cache lines for un-cached accesses.
2001-07-19 23:47:37 +00:00
eeh
b3edeb5745
Add 'ide' to the IPL table and fix things so we don't rely on the PROM
...
mapping things in for us.
2001-07-19 23:40:36 +00:00
eeh
76665dc463
Small code cleanup.
2001-07-19 23:38:11 +00:00
eeh
5150b485b4
Do ignore unregistered interrupts instead of faulting.
2001-07-19 23:37:17 +00:00
eeh
12fbdb7bb3
Make bus_space_debug default to off.
2001-07-19 23:35:42 +00:00
eeh
075ed881ad
Print out PID and command name for alignment faults.
2001-07-19 23:33:09 +00:00
eeh
a60e790efe
Make a bigger hole between kernel text and data.
2001-07-19 23:31:06 +00:00
thorpej
030941bc0d
Only match the "gbus" on the primary CPU's CPU module.
2001-07-19 20:34:08 +00:00
itojun
93a890b609
it seems that pp_{up,down} code does not really help, since (1) sppp_ioctl
...
calls lcp.{Up,Down} by itself, and (2) as lmc driver uses interrupt to
get the card initialization callback lcp calls from sppp_ioctl
does not really work. for chdlc pp_{up,down} are not really necessary so
don't bother (#if 0'ed).
2001-07-19 19:15:13 +00:00
assar
cb2d5b58af
remove support for creating files and directories from msdosfs_mknod
2001-07-19 19:12:33 +00:00
thorpej
13e63c6a43
Take a guess and initialize the prefetch threshold to 256 bytes. Haven't
...
found this one in the manual yet.
2001-07-19 19:09:22 +00:00
thorpej
b0256ef005
DWLPx has a 256-byte DMA prefetch threshold.
2001-07-19 18:59:41 +00:00
thorpej
1e21ada1d9
MCPCIA has a 256 byte DMA prefetch threshold.
2001-07-19 18:55:40 +00:00
fvdl
3350f68f80
Avoid warnings about uninitialised usage.
2001-07-19 18:55:38 +00:00
thorpej
c563df226b
The T2 has a 256 byte DMA prefetch threshold.
2001-07-19 18:50:25 +00:00
thorpej
e6ab362da0
The LCA isn't supposed to have a DMA prefetch threshold, but experience
...
has shown is that if we don't allocate a spill page, we get a machine
check. So, initialize the threshold to 256 bytes.
2001-07-19 18:47:38 +00:00
thorpej
4c4c88dbb7
ALCOR/ALCOR2/PYXIS have a 256-byte DMA prefetch threshold.
2001-07-19 18:42:42 +00:00
thorpej
908464bef9
APECS has a 256 byte DMA prefetch threshold.
2001-07-19 18:39:29 +00:00
thorpej
63bc6c1370
Since the SGMAP buffer load subroutine doesn't need to modify
...
the segment index, don't pass it by reference.
2001-07-19 18:20:20 +00:00
scw
b4c68ef164
Descend into wrtvid in all but the install pass.
2001-07-19 18:18:30 +00:00
thorpej
77e1f86ad4
Implement dmamap_load_uio for SGMAPs.
2001-07-19 18:08:54 +00:00
kleink
d775ce82eb
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:47:18 +00:00
kleink
1bd93b6232
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:19:40 +00:00
thorpej
e60fffea3b
Pay attention to BUS_DMA_READ; don't need to allocate a spill
...
page if it is set.
2001-07-19 17:08:44 +00:00