f70c591ad2
Add `create' and `destroy' commands.
2000-07-02 00:28:00 +00:00
914e93c4db
mention resesrved SPI range, which is not usable from userland
2000-07-01 01:04:04 +00:00
1a9289d09a
- Add `tunnel' and `deletetunnel' commands, which issue the ioctls
...
that gifconfig(8) would issue to configure tunnel endpoints. This
allows IP tunnel interfaces (`gif' right now, and `gre' later) to
be configured with ifconfig(8), and via /etc/ifconfig.<interface>.
Partially taken from similar changes in OpenBSD.
- Const poison the command functions a bit. We really need to clean
up the command function interface.
2000-06-30 17:45:11 +00:00
61d1fe8df3
User-level changes for filling the disk.
...
Set MINFREE to 80, since that's a more reasonable value according to the
literature than FFS' 90. Remove a bunch of other unused FFS cruft from
config.h.
Initialize lfs_bfree correctly vis-a-vis MIN_FREE_SEGS, so the
filesystem doesn't over-represent the amount of free space it has.
Initialize lfs_dmeta so the kernel can estimate starting from a
reasonable value.
2000-06-27 21:06:24 +00:00
a461faa506
<vm/vm_param.h> is now <uvm/uvm_param.h>
2000-06-27 09:10:24 +00:00
df36d174d2
Remove spurious colon from error message; clnt_pcreateerror provides one.
2000-06-26 21:53:34 +00:00
ad91bba6a6
we now need <uvm/uvm_param.h>
2000-06-26 15:37:26 +00:00
e62920cf2e
revised rndctl which can display pool statistics.
2000-06-20 02:40:10 +00:00
73dfacb53d
If "SMALL" is defined don't include kvm support, primarily for install
...
media.
2000-06-20 01:49:20 +00:00
6a2c167125
The default core file is /dev/mem, not /dev/kmem.
2000-06-20 01:47:03 +00:00
d65482091f
Adapt to new RPC interface. Use getaddrinfo(), not gethostbyname().
2000-06-20 00:45:24 +00:00
27ddcb91ce
Handle unsupported protocols (i.e. no v6 support on the other side)
...
a tad better.
2000-06-19 23:19:20 +00:00
643cb3c341
Don't check namelist when choosing to use the sysctl interface.
2000-06-16 03:51:00 +00:00
907def68ca
ANSIfy.
2000-06-16 03:42:12 +00:00
b75d5299d7
Oops, forgot to commit this file - actually remove the kmem setgid bit.
2000-06-16 03:41:37 +00:00
a7d9e1f93d
Use new KERN_MSGBUF sysctl if running on a live kernel, and remove
...
setgid kmem bit from executable.
2000-06-16 00:20:23 +00:00
474a72e217
Disable (unifdef for now) tunefs -n <disable|enable>, this is done via
...
a mount option now.
2000-06-15 22:37:17 +00:00
56fb6920d7
Enable -o softdep.
2000-06-15 22:36:46 +00:00
5422b85358
Enable and document the -o softdep option.
2000-06-15 22:36:07 +00:00
334298998c
Fix QNX partition IDs, confirmed by looking at FreeBSD's fdisk.
...
Note: 77 == 0x4d
2000-06-14 19:35:50 +00:00
75453f286d
Add "-i" flag to specify the location of the index file inode, to
...
examine alternate checkpoints. Regularize usage of maxino. Remove olf
debugging cruft.
2000-06-14 18:43:57 +00:00
db755e7c76
sweep of my licenses (userland files w/o only my copyright) for
...
consistency. (no functional changes)
2000-06-14 17:24:02 +00:00
d220ca5ba3
fix up NetBSD RCS Ids to match the standard, and the leading comment as
...
to match as well. No functional changes.
2000-06-14 06:48:47 +00:00
01014585ed
update examples, so that they would at least pass the parser.
2000-06-14 03:02:12 +00:00
11a42bf1f4
move setkey(8) from usr.sbin to sbin, to enable us to initialize
...
IPsec manual key before /usr mount..
(based on "don't use cvsmove" discussion i have seen, I did not use cvsmove)
2000-06-13 15:15:21 +00:00
07098cd363
better conformance to draft-ietf-ipngwg-icmp-name-lookups-05.
...
the old code was chimera of 03 and 05 draft.
-n by default, since IPv6 reverse lookup takes too much time.
use -H to enable reverse name lookup.
2000-06-12 16:21:02 +00:00
88f6fad445
Revert 1.18 -> 1.19; causes infinite loops on machines that use ppp and
...
do active routing.
2000-06-11 23:43:17 +00:00
4582a90f6d
Sync with rev. 1.19 of vnconfig.c.
2000-06-09 15:06:31 +00:00
9974e53bda
Force -t or -N flag disables -u flag (but -t case is just for sanity).
2000-06-09 09:05:02 +00:00
43ffff9e2c
Update to be more address-family independent, and adapt to TI-RPC
...
interface.
XXX this code needs a cleanup, especially the retry-loop.
2000-06-09 00:06:36 +00:00
46cae96db6
Fixed typo - zonbie -> zombie
2000-06-08 20:43:16 +00:00
204ee4d791
make sure to clear ni_flags field on -w.
2000-06-08 13:56:22 +00:00
73053385f4
Note that sysid 0 marks a partition as unused.
2000-06-07 22:40:59 +00:00
8183434ff7
s/PIMCTL/PIM6CTL/ to avoid future confusion.
2000-06-07 04:40:46 +00:00
09218270f0
change ``-a'' to be a synonym for ``-A''.
...
addresses PR 7629.
2000-06-06 07:09:14 +00:00
0ffb5bb96d
Use CMSG_*() correctly when sending file descriptors.
2000-06-05 16:30:43 +00:00
3fa8f52b84
In certain cases (e.g. where it makes sense) read/display the
...
component label for spare disks too.
2000-06-03 16:59:36 +00:00
f26e8d9a17
Slight wording improvement on the 'raidctl -R' case.
2000-06-02 04:11:46 +00:00
1d7db13f9f
make ldconfig.c not always fail.
2000-06-01 18:17:06 +00:00
bb159432ef
Add a -I flag which, combined with -e, gives the user the opportunity
...
to edit and create a new label on a virgin disk.
2000-05-31 14:13:48 +00:00
4d75110047
Make sure we handle the 'no progress' case properly.
...
Thanks to Manuel Bouyer for noting the problem (and supplying a patch!).
2000-05-31 00:47:30 +00:00
9e80654bda
Check for cycles in the inode free list, and for free inodes not on the free
...
list.
2000-05-30 04:33:14 +00:00
b890d3f2ba
LP64 format problems. u_int64_t on alpha != %llu
2000-05-29 21:42:12 +00:00
c135b7f036
cp_time[] is an array of u_int64_t's now.
2000-05-29 11:59:01 +00:00
239e79a9ad
Fix up some single quotes that messed up a line. (Thanks Wiz!)
2000-05-29 03:40:43 +00:00
c4f772eecb
Obtaining component labels from spares is not supported yet, but add
...
some code that makes some progress in that direction.
2000-05-28 23:12:01 +00:00
0ce56710af
Cleanup ETA calculation stuff.
2000-05-28 22:22:11 +00:00
64ad6c882c
Have raidctl use the fine-grained progress info. ETA calculation stuff
...
needs to be cleaned up.
2000-05-28 00:49:35 +00:00
1033142eea
Truncate the CHS values correctly in case a partition boundary exceeds
...
their range.
2000-05-27 19:02:54 +00:00
2d6c6df05e
add system(3) for spawning the editor - this is handy when EDITOR is set to
...
something like 'editor arg1 arg2 ...'
2000-05-27 19:01:13 +00:00
thorpej