augustss
d644f9b973
Apply cs4236 fix from rh@vip.at. Closes PR 5143.
1998-03-11 09:26:05 +00:00
chuck
927ec8b012
bug fix: when doing uvm_vnp_sync() actually skip over blocked uvn's so
...
that we don't try and sync them later. should get rid of the
"uvm_vnp_sync: dying vnode on sync list" related warnings that were
occuring during a "make install."
1998-03-11 01:37:40 +00:00
chuck
b87759e7f2
bug fix: bring in-line with rest of uvm: use kernel_map for object offset
...
rather than kmem_map. should fix PR#5129 reported by
Lennart Augustsson.
1998-03-10 14:53:20 +00:00
chuck
21624aaf72
uvm_dump now dumps some important pointers for debugging
1998-03-10 14:36:55 +00:00
kleink
5cf59ee9ad
Move the permission check in vfs_syscalls.c::change_owner() back to
...
ufs_chown() again - the facility required in this context would be a
filesystem-specific super-user determination, which is not available yet.
1998-03-10 11:56:40 +00:00
kleink
071ab13ebb
Move the permission check in change_owner() back to ufs_vnops::ufs_chown()
...
again - the facility required in this context would be a filesystem-specific
super-user determination, which is not available yet. Also, add some
clarification to a comment.
1998-03-10 11:49:33 +00:00
leo
0dd40d6952
Bus-dma implementation for the atari. Heavily based on the i386
...
implementation.
1998-03-10 11:42:53 +00:00
mrg
d59aba65d9
build msdosfs LKM with UVM support. pr#5014
1998-03-10 06:53:36 +00:00
scottr
20a21d162e
Sync mc_rint() prototype with if_mcvar.h. (How did this
...
one slip by? Forty lashes for me...)
1998-03-09 23:05:28 +00:00
thorpej
7225aae835
Move check for user-pmap-still-using-Lev1map from pmap_enter_ptpage()
...
to pmap_enter().
1998-03-09 22:31:23 +00:00
christos
83449d8960
- fix pcmcia_scan_cis to return:
...
-1 error
0 desired tuple not found
1 desired tuple found
1998-03-09 21:54:13 +00:00
christos
441bea9142
- more 3c562 magic; document that the 0x88 tuple only works in 3c562a-c
...
and not in d where it goes back to use the eeprom method. So we detect
when the tuple method fails and fall back to the original method.
- even more 3c562 magic; the updated linux driver mentions that addresses
0x??00-0x??7f only work instead of the previous...
1998-03-09 21:52:31 +00:00
thorpej
daa9cfae50
Don't do the Segtabzero-for-dev-zero hack.
1998-03-09 20:43:28 +00:00
thorpej
e456fc0538
Simplify/speed up pagemove() somewhat by using the Virtual Page Table.
1998-03-09 20:17:03 +00:00
thorpej
78a173bada
Define VPT_INDEX(), which computes the index into the Virtual Page Table
...
of the PTE that maps the specified virtual address.
Thanks to Chris Demetriou and Ross Harvey for clarifying the VPT.
1998-03-09 19:57:57 +00:00
mark
fd250aecdd
Remove the width specifier in the podule manufacturer printf().
1998-03-09 19:14:44 +00:00
mark
eff3470d02
Make this driver build again. Needs overhaulling.
1998-03-09 19:12:59 +00:00
mark
c2efbb1d9a
Implement the bus_space_write_multi_1() function for the podulebus
...
(podulebus_wm_1()).
1998-03-09 19:11:30 +00:00
is
20251e62f9
Bug fix for the Ariadne panic: don't touch addresses outside the buffer we
...
got passed.
- analysis by Charles Hannum
- bugfix by Michael van Elst
- test by Thorsten Frueauf & Matthias Scheler
1998-03-09 17:00:33 +00:00
mikel
a57a8d66ff
let panic() call DDB, don't do it ourselves; from Nathan Williams in PR 5131
1998-03-09 06:32:51 +00:00
mikel
7d4b078022
print proper invalid IRQ, from Heiko Rupp in PR 5128
1998-03-09 06:20:26 +00:00
mrg
8106d13596
KNF.
1998-03-09 00:58:55 +00:00
is
90e5d61467
Conditionally (on defined(DRACO)) compile new DraCo keyboard code sequences.
...
Pointed out by Bernd Ernesti.
1998-03-08 19:59:15 +00:00
gwr
56fd5cb1ae
Like INSTALL and INSTALL3X, leave out DDB.
...
(Can patch using the PROM if needed.)
1998-03-08 19:38:05 +00:00
gwr
d7e49b6a5b
Make comments refer to GENERIC3X, not GENERIC
1998-03-08 19:33:09 +00:00
gwr
9c0c7119c3
Leaner configurations for the installation media.
...
(Small enough to work on all machines.)
1998-03-08 19:29:40 +00:00
gwr
b043198b53
Sync with sun3/machdep.c (should factor out common stuff...)
...
> Do the "early breakpoint" (if booted with "-d") even if we
> have only the PROM to handle it, so one can patch things.
1998-03-08 19:12:53 +00:00
gwr
7db30c0844
Do the "early breakpoint" (if booted with "-d") even if we
...
have only the PROM to handle it, so one can patch things.
1998-03-08 19:09:58 +00:00
gwr
d342d51752
Fix comments
1998-03-08 18:56:08 +00:00
gwr
4242e2ab10
No need for default base addresses here anymore.
1998-03-08 18:54:23 +00:00
gwr
5242b3b02a
Need to use an offset to map the colormap H/W now that the
...
config address is that of the P4 register. Oops.
1998-03-08 18:53:17 +00:00
kleink
f5c77ddbbc
Fix a whitespace botch.
1998-03-08 15:12:49 +00:00
mrg
c6dd5cbefd
standardise options header includes.
1998-03-08 14:04:14 +00:00
christos
509cb1d75f
- remove duplicate setting of CCR
...
- fix debugging code so that it compiles
- reorder the disabling code so that it is more logical
- add splhigh()/splx() in the first establish setting for symmetry
1998-03-07 17:58:17 +00:00
augustss
a294c3fef3
Regen.
1998-03-07 16:48:47 +00:00
augustss
8dd96862cd
Add Matrox Millenium II AGP.
1998-03-07 16:43:46 +00:00
scottr
8840acb1e2
Quirk table entries for IBM H3171 and Quantum ELS85S disks.
1998-03-07 06:34:59 +00:00
thorpej
b3d7fd8f3f
Just use vtophys() to get the PCB phys addr.
1998-03-07 04:20:45 +00:00
thorpej
9c236919e9
Rewrite pmap_extract(), and use it as appropriate in vtophys() rather
...
than (almost) duplicating the code.
1998-03-07 03:37:02 +00:00
thorpej
cd7d081d02
Export a pointer to the Virtual Page Table.
1998-03-07 03:15:43 +00:00
thorpej
f7d64ef778
Clean up a comment.
1998-03-07 03:15:06 +00:00
thorpej
f55b280ffc
Clean this up a bit.
1998-03-07 01:44:08 +00:00
thorpej
dcbc04e7af
Rename Sysptmap and Sysmap to Lev2map and Lev3map, respectively, and
...
add some comments describing in better detail what they are and how they
are used.
1998-03-07 01:43:54 +00:00
thorpej
60e6d2e48f
Update a comment in pagemove().
1998-03-07 01:26:04 +00:00
thorpej
ff155df72a
Nuke kvtopte(). Also, change pagemove() to lookup the from and to PTEs
...
in each iteration of the loop, since PT pages may not necessarily be
contiguous.
1998-03-07 01:11:39 +00:00
thorpej
60d30d3838
Nuke kvtopte() and ptetokv().
1998-03-07 01:10:05 +00:00
thorpej
58a7bd9288
Nuke the vatopa() macro.
1998-03-07 00:42:07 +00:00
thorpej
059d0c72de
pmap_ste() -> pmap_l2pte(), pmap_pte() -> pmap_l3pte()
1998-03-06 23:41:01 +00:00
thorpej
8081bd3017
Move pmap_pte*() macros into the header file, nuke pmap_ste_v(), add
...
pmap_lev1pte().
1998-03-06 23:19:26 +00:00
thorpej
5a34bf2a24
Add Dayna CommuniCard E, from Havard Eidnes, PR #5120 . Also, remove a
...
few unnecessary/no-longer-completely-accurate comments.
1998-03-06 20:00:28 +00:00