90e5d61467
Conditionally (on defined(DRACO)) compile new DraCo keyboard code sequences.
...
Pointed out by Bernd Ernesti.
1998-03-08 19:59:15 +00:00
56fd5cb1ae
Like INSTALL and INSTALL3X, leave out DDB.
...
(Can patch using the PROM if needed.)
1998-03-08 19:38:05 +00:00
d7e49b6a5b
Make comments refer to GENERIC3X, not GENERIC
1998-03-08 19:33:09 +00:00
9c0c7119c3
Leaner configurations for the installation media.
...
(Small enough to work on all machines.)
1998-03-08 19:29:40 +00:00
b043198b53
Sync with sun3/machdep.c (should factor out common stuff...)
...
> Do the "early breakpoint" (if booted with "-d") even if we
> have only the PROM to handle it, so one can patch things.
1998-03-08 19:12:53 +00:00
7db30c0844
Do the "early breakpoint" (if booted with "-d") even if we
...
have only the PROM to handle it, so one can patch things.
1998-03-08 19:09:58 +00:00
d342d51752
Fix comments
1998-03-08 18:56:08 +00:00
4242e2ab10
No need for default base addresses here anymore.
1998-03-08 18:54:23 +00:00
5242b3b02a
Need to use an offset to map the colormap H/W now that the
...
config address is that of the P4 register. Oops.
1998-03-08 18:53:17 +00:00
b3d7fd8f3f
Just use vtophys() to get the PCB phys addr.
1998-03-07 04:20:45 +00:00
9c236919e9
Rewrite pmap_extract(), and use it as appropriate in vtophys() rather
...
than (almost) duplicating the code.
1998-03-07 03:37:02 +00:00
cd7d081d02
Export a pointer to the Virtual Page Table.
1998-03-07 03:15:43 +00:00
f7d64ef778
Clean up a comment.
1998-03-07 03:15:06 +00:00
f55b280ffc
Clean this up a bit.
1998-03-07 01:44:08 +00:00
dcbc04e7af
Rename Sysptmap and Sysmap to Lev2map and Lev3map, respectively, and
...
add some comments describing in better detail what they are and how they
are used.
1998-03-07 01:43:54 +00:00
60e6d2e48f
Update a comment in pagemove().
1998-03-07 01:26:04 +00:00
ff155df72a
Nuke kvtopte(). Also, change pagemove() to lookup the from and to PTEs
...
in each iteration of the loop, since PT pages may not necessarily be
contiguous.
1998-03-07 01:11:39 +00:00
60d30d3838
Nuke kvtopte() and ptetokv().
1998-03-07 01:10:05 +00:00
58a7bd9288
Nuke the vatopa() macro.
1998-03-07 00:42:07 +00:00
059d0c72de
pmap_ste() -> pmap_l2pte(), pmap_pte() -> pmap_l3pte()
1998-03-06 23:41:01 +00:00
8081bd3017
Move pmap_pte*() macros into the header file, nuke pmap_ste_v(), add
...
pmap_lev1pte().
1998-03-06 23:19:26 +00:00
84963f97b5
Move allocation and mapping of the page table page for "bioscall" from
...
locore to here.
1998-03-06 14:53:06 +00:00
25f48b177c
Use NKPDE page table pages (instead of only one) for temporary mapping
...
in transition to relocated mode.
Remove preparation for "bioscall" identity mapping - it is in the way
and can be done later in init386().
Should solve the problem described in PR 4832 and 5102.
1998-03-06 14:51:36 +00:00
2630ce2157
label 1: within #ifdef pmax is referenced from outside.
...
so it didn't work without -Dpmax.
1998-03-06 13:54:02 +00:00
6e434a4386
Make this compile again.
1998-03-06 09:06:51 +00:00
4fcd1c2cdd
include <machine/vm86.h> if VM86 option defined
1998-03-06 04:12:56 +00:00
92abc814ff
Clean this up a bit.
1998-03-06 00:21:40 +00:00
10f8023240
Added arch/newsmips/Makefile.
1998-03-05 15:03:20 +00:00
d24f809241
Added prototype for ibcs2_sendsig.
1998-03-05 05:23:49 +00:00
b8bb612601
Add ibcs2_sendsig function.
...
Add ibcs2_sigcode function to locore because we need to call our own
version of sigreturn.
Add support for emul_ibcs2_xout (XENIX) structure because we need to emulate
some syscalls differently.
1998-03-05 04:20:44 +00:00
53e3bf87b9
Fix think'o in last kcopy() change.
1998-03-05 02:10:57 +00:00
df1fcaa8e3
Rename NetBSD/news to NetBSD/newsmips.
1998-03-04 22:26:35 +00:00
157b712178
Rename NetBSD/news to NetBSD/newsmips.
1998-03-04 22:14:13 +00:00
415c4a15df
duplicate i386 fixes (q.v.)
1998-03-04 07:20:13 +00:00
8854631e5f
add file declarations for MD pciide file.
...
add (temporary) device/file declarations for the MI PCI IDE controller
driver. These are present here until the wdc declaration mess is
resolved, because until then they need to go into MD files files in
places where they play nice with the wdc declaration.
1998-03-04 06:40:29 +00:00
f766e521be
In kcopy(), make sure we save and restore the old fault handler; kcopy()
...
is called from uiomove(), which may be in the code path of servicing
a non-fatal page fault caused by a copyin() or copyout().
Originally suggested by Steve Woodford.
1998-03-04 06:39:14 +00:00
ccdea2d9c8
machine-dependent bits (for compat interrupt mapping) of PCI IDE driver.
1998-03-04 06:35:47 +00:00
a2db880e8c
In kcopy(), make sure we save and restore the old fault handler; kcopy()
...
is called from uiomove(), which may be in the code path of servicing
a non-fatal page fault caused by a copyin() or copyout().
1998-03-04 02:11:58 +00:00
da3c8e52f1
Make this work with DEBUG="-g"
1998-03-03 07:38:40 +00:00
803f5aa188
Remove the memcpy() alternate entry point for bcopy(), a temporary measure
...
until the memcpy()/bcopy() thing is worked out.
1998-03-02 23:40:42 +00:00
f02b1a7a33
Make this compile again in light of Lite2 merge. (Yuck.)
1998-03-02 23:17:19 +00:00
da7d7ca568
Add magic number for driver map structure. (oops!)
1998-03-02 22:40:31 +00:00
09dbd9234d
fix typo in last commit (noticed on inspection)
1998-03-02 21:36:55 +00:00
7ff7b02fac
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 20:01:05 +00:00
9da165424c
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 19:57:00 +00:00
25bc5ab033
Don't make simple_lock decls dependent on NCPU > 1, be consistent with
...
the rest of the kernel.
1998-03-02 18:06:32 +00:00
ede1a3fc5b
Make this compile again.
1998-03-02 17:58:34 +00:00
e3d8e9c72b
enable compatibility for old partition ID per default
1998-03-02 17:07:53 +00:00
8e2874bf64
Support for UVM on VAXen.
1998-03-02 17:00:00 +00:00
3bb9e75863
Change MBR partition type for NetBSD to 0xa9, like the i386 port.
...
Provide compatibility via COMPAT_386BSD_MBRPART.
1998-03-02 16:18:17 +00:00
is