02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
ca65f2ce5d
Remove dkbad.h.
1994-12-14 15:17:22 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
0e689f0375
Fix uninitialized pointer, pointed out by Michael VanLoon.
1994-04-25 03:16:03 +00:00
84752ce046
Don't need isa.h.
1994-04-24 01:29:56 +00:00
893be926ec
Use TAILQ_*() to maintain the drive activation queues.
1994-04-20 07:23:52 +00:00
cabd481fa9
Don't print a duplicate message about stray interrupts.
1994-04-09 03:43:36 +00:00
3f5e4f423f
Implement dynamic IRQ configuration and IRQ sharing. Inline spl*() calls.
...
Reorganize and clean up the relevant code.
1994-04-07 06:48:19 +00:00
8ccc7bdffb
Turn off the timeout debugging info by default.
1994-03-30 04:58:32 +00:00
592ec61b17
Updates for new autoconfig.
1994-03-29 04:35:37 +00:00
fe3d0b99c3
Prefix the busy-wait messages with `ignore this:' so people stop reporting
...
it as a bug.
1994-03-12 22:36:40 +00:00
9ab5683dc7
Fix problem with reading the disk label if it's not at the beginning of the
...
disk.
1994-03-12 22:32:48 +00:00
15d758c39a
Remove backward compatibility hacks for config(8), as they are no longer
...
useful.
1994-03-12 03:45:03 +00:00
d884f7c425
Update to match config(8).
1994-03-12 03:34:02 +00:00
119f3ea688
Various:
...
Put WDF_ERROR in the wdc_softc, to avoid gratuitously forcing non-active drives
into single-sector mode on the next transfer. Arrange to wait for an interrupt
after wdsetctlr(); this avoids long busy-wait delays, and gets rid of the
`extra interrupt' messages (except for one immediately after autoconfig on some
machines). Replace some uses of wdsetctlr() with simply lowering wd->sc_state;
no point in forcing this immediately. Allow control operations to time out.
Enable the warnings for long busy-wait delays by default. Some other minor
things not worth mentioning.
1994-03-11 23:29:12 +00:00
99dbc0692d
Add a heuristic for detecting old config(8)s. This is very temporary.
1994-03-10 22:30:06 +00:00
390f5990bb
Now that the disk probe routines are actually called, they need to return
...
something.
1994-03-10 21:52:07 +00:00
0c19458c6f
More updates for new config.
1994-03-10 20:05:30 +00:00
aa45779df7
Update for new config.
1994-03-10 19:57:20 +00:00
e4102b8797
Cleanup to fit standard coding conventions, and *many* bugs fixed.
1994-03-10 05:18:33 +00:00
5a17003403
Some changes inspired by Bruce Evans's driver:
...
Consolidate error reporting in one function. Actually use the dk_status and
dk_error fields, and pass around only the error bit to avoid lots of unneeded
assignments and tests. No functional differences.
1994-03-07 05:54:44 +00:00
991225bfc8
Remove DKFL_QUIET.
1994-03-07 03:18:35 +00:00
0c082bcaf8
DELAY() --> delay(). This is not a macro.
1994-03-06 17:18:43 +00:00
87ed28e74e
Move the drive select and various other things into wdcommand(), to avoid
...
duplicating code.
1994-03-05 08:17:06 +00:00
3e02952c52
Make sure we clear the interrupt when necessary. Why this isn't needed on
...
my hardware is a mystery.
1994-03-04 23:43:14 +00:00
652712272f
Add another missing splx().
1994-03-04 17:51:10 +00:00
0f92f76ceb
Remember to splx() on some error conditions.
1994-03-04 17:45:22 +00:00
ef3c1bf7e6
Start the timeout loop *after* we've decided there is a disk there.
1994-03-04 04:15:24 +00:00
220512c2a8
De-ANSIfy. Move the timeout counter into struct disk. Remove unneeded args
...
to wd[gs]etctlr(). Other minor changes.
1994-03-04 03:43:48 +00:00
fa396ad402
Watch `seek complete' bit per IBM documentation. Clean up wdioctl(). Other
...
minor cleanup.
1994-03-03 01:58:21 +00:00
7b734f94ec
Be more careful about clearing the controller and drive active flags.
1994-03-02 23:27:13 +00:00
21118b1bc4
Don't busy-wait for read or write completion.
1994-03-02 22:07:00 +00:00
e9326b3ba7
Make wdc_wait() do an implicit wait_for_unbusy(). Pass structure pointers
...
rahter than unit numbers where appropriate. Fix conflict if two drives have
I/O pending at the same time. Add some more sanity checks. Some other minor
cleanup.
1994-03-02 21:42:31 +00:00
8ba740e6ab
Get the residual count right.
1994-02-26 19:49:25 +00:00
060ee7dbab
Clean up busy-wait code a little, and we need a special disksort() to skip
...
over bufs in a combined transfer.
1994-02-26 19:00:51 +00:00
969cea2357
Fix bug from 1.43 correctly.
1994-02-26 17:59:46 +00:00
4299a2baec
Fix typo.
1994-02-26 17:13:44 +00:00
aeae0fd5e3
Various cleanup, and fix last night's bug.
1994-02-26 17:10:12 +00:00
fa83b6f469
Fix typo.
1994-02-26 00:08:01 +00:00
a7cdc040ec
Some more stylistic cleanup.
1994-02-26 00:00:17 +00:00
7f6bce365b
Fix an obvious bug that could stall the queue.
1994-02-25 18:30:37 +00:00
2c3b28e0f9
Remove some redundant code.
1994-02-25 18:17:30 +00:00
7e6ee0b562
Increase polling delay.
1994-02-25 18:08:21 +00:00
9091e07409
Generalize busy-wait loops.
1994-02-25 17:45:28 +00:00
faf08f7262
Don't bother #ifdefing things that are needed and always enabled.
1994-02-25 16:54:41 +00:00
f6cee22427
Don't reimplement disksort().
1994-02-25 16:43:48 +00:00
373782a3af
`We are the KNF. You will be assimilated.'
1994-02-25 16:40:47 +00:00
2f62d06c05
Back pointers are not useful for disksort().
1994-02-10 15:17:34 +00:00
bbb3e7618c
All ioctl routines take a struct proc * now.
1994-02-09 21:06:46 +00:00
57892d4faf
Remove another use of b_actl.
1994-02-06 17:39:48 +00:00
adeebc448e
Use b_actf, not av_forw.
1994-02-06 10:00:30 +00:00
664f968d53
Inline all the [lr]cr[023]() `functions' in cpufunc.h.
1994-01-03 16:23:06 +00:00
c0e772492e
Inline all the [lr]cr[023]() `functions' in cpufunc.h.
1994-01-03 16:21:48 +00:00
778a3db3d0
Correct dumping to WD (was destroyed by MACHINE_NONCONTIG code)
1993-12-24 13:56:14 +00:00
f2a0b4b335
Canonicalize all #includes, and add pio.h where appropriate.
1993-12-20 09:05:17 +00:00
8ab45ada42
Eliminate reference to Maxmem.
1993-12-16 20:22:56 +00:00
55a9a547a2
from Soeren Schmidt <sos@login.dkuug.dk>:
...
Basically it does a timeout on lost interrupts, starting the operation
again and logging and error message on the console.
additionally fixes some of the (newer ending) while loops
(that made it work with two IDE disks !)
1993-12-13 10:16:56 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
d1ed63195d
fix the divide-by-zero problem w/old disks. this patch is ws's "fault."
1993-06-18 20:45:35 +00:00
2adecf84f6
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:52 +00:00
30177b538f
add rcsids to everything and clean up headers
1993-05-22 07:56:12 +00:00
e34f239662
First cut at cpu independent disklabels.
...
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
545cc18754
This patch allows the wd device driver to tell how big the disks are on
...
WD1007-derived controllers. In this example, wdc0 is a WD1007-clone,
and wdc1 is a WD1003-clone. WD1007 controllers are generally ESDI
and IDE controllers.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wd0 at wdc0 targ 0: 322MB 1224 cyl, 15 head, 36 sec <disktype>
wdc1 at 0x170-0x17f irq 7 on isa
wd2 at wdc1 targ 0: (unknown size) <disktype>
1993-05-10 05:53:22 +00:00
5ae997897e
i thought i deleted this line before!
1993-05-09 04:25:48 +00:00
a0bcb17e60
support for making dev->id_alive be set, this is for iostat to
...
find disk devices. wee bit of a kludge. sub-device attach()
routines must now return 1 for successful attach(), 0 otherwise.
Other bsd's do this too..
1993-05-04 08:27:29 +00:00
e2a9eb19a4
slight code quality improvement. not related to the bug with very
...
old controllers or disks! :-)
1993-04-18 10:03:20 +00:00
fbecd3e987
Once more: some changes to the ioconf.c structure. It will now handle
...
devices hanging off controllers, any kind of controller.
A device on isa0 is called at probe(self), then attach(self)
A controller on isa0 is called at probe(self), then all it's children with
defined unit numbers are initialized by calling attach(subdev); next all
subdevices with unit ? are initialized by calling attach(sundev).
Almost all device entry points is now like the vax/sun model (intr being
the weird one)
1993-04-15 07:52:08 +00:00
bf6814fb30
wd driver would fail on calling wdgetctlr() for older drives and
...
controllers. New behaviour is that if the standard method fails, try
to recalibrate the drive. Success means the drive exists. patch by
hpeyerl@novatel.cuc.ab.ca (who owns several of these historical
artifacts)
1993-04-15 06:39:00 +00:00
f262b564a2
new scsi subsystem.
...
changes also in config/mkioconf.c & sys/scsi/*
1993-04-12 08:17:23 +00:00
c2176edbac
have probe return size of io space on successful return, rather
...
than simply 1.
1993-04-09 16:25:07 +00:00
b9bd4b25de
dmesg output at boottime now tries to print out information as
...
soon as it is available. The output looks much more like Sunos.
1993-04-08 08:26:46 +00:00
a2b4863160
ripped out a message
1993-04-06 12:09:55 +00:00
9b67a6d7ad
Mod-barsoom wd additions. config program + kernel config files changed too.
...
fd support had to change slightly too.
1993-04-06 10:06:28 +00:00
e541169ce2
after 0.2.2 "stable" patches applied
1993-03-21 18:04:42 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
mycroft