but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
normal rei course. If the handler returns non-zero, just rte.
This should allow better MACE response-time and still keep serial
interrupt overhead to a minimum on older, slower machines.
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
(mrz5149@cs.rit.edu) for the addresses and hints as to how the interrupts
might be disabled, and thanks to Henry Hotz (h.b.hotz@jpl.nasa.gov) for
testing on the 840AV.
Unmap the DAFB regs on the other Quadras after attachment. They're not
used.
really be dependent on DEBUG, not DIAGNOSTIC. While we're here, add
a couple of DEBUG messages to mac68k_calibrate_delay(), and wrap them
all appropriately so that the messages aren't enabled unless we
specifically ask for them (by setting clock_debug).
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
