268918ca6d
For a pmax:
...
+ Don't include pcmcia goop.
+ Don't mention floppy disks!
+ Add minimum memory requirements.
+ Only mention rz* disks, not wd* or sd*.
Mention that watching the file extraction list can slow things down on
a slow console.
1999-05-04 03:36:15 +00:00
21a058f060
Change terminal type and ifconfig interface for pmax.
...
Mention some new files that have appears in NetBSD 1.4.
Make i386 and arm32 X configuration conditional on those archs.
Remove pmax X11R5 discussion - uses X11R6 now.
1999-05-04 03:35:03 +00:00
bdb75f209e
Update src set sizes to current reality.
...
Prune 1.2->1.3 compatilbity issues, and 1 (only!) 1.3->1.4
issue. More could go here!!!
1999-05-04 03:34:14 +00:00
7e55f1498b
Add a html <name> to second-level subsection macro.
1999-05-04 03:33:30 +00:00
11de58919c
Add pmax kernels.
...
Update available set sizes to current reality.
Remove comment about sysinst not being able to install X sets.
1999-05-04 03:32:55 +00:00
528b59cd0b
Oops, remove ".include <bsd.sys.mk>" added by mistake in previous commit.
1999-05-04 02:46:15 +00:00
3434f6e05e
Add dummy depend targets so that "make depend" doesn't bomb out.
1999-05-04 02:44:22 +00:00
06d4645b5d
Update this. From Izumi Tsutsui.
1999-05-03 21:58:10 +00:00
b2d4e4e618
add compat_ibcs2 manual page to lists
1999-05-03 19:04:10 +00:00
ef37d9492f
Fix an old typo (or rather, an old failure to fully adapt copied code's
...
prompt text to the new location): for ftp, we build a list and extract all
at once afterwards.
1999-05-02 20:53:22 +00:00
e254cfed65
Since our mbr code and bootselector are only 512 bytes long, only
...
read/write that much. Previously, too much was written back to
disk (although it didn't do any harm because of the sequence
of execution).
Also, upgrade the MBR type from 386bsd -> NetBSD if needed during
an upgrade operation.
1999-05-02 15:26:22 +00:00
337300d376
Change partition type if we're installing into an old 386bsd partition.
...
Check if there's no active partition after MBR editing.
Ask for own MBR to be installed if we're booting from out of CHS range.
Ask for bootselector to be installed if > 1 OS, and configure it.
1999-05-02 13:07:15 +00:00
ac3360b0df
Forgotten part in 1.7.
...
Copy /sbin/fsck_ffs with /sbin/fsck.
1999-05-01 10:59:55 +00:00
d914980ab2
More typo's (Julian Coleman).
1999-04-30 18:29:16 +00:00
fd88c5db65
Mention the package system (Julian Coleman).
1999-04-30 18:26:58 +00:00
c0161d7e63
Add sysinst setup for sparc, does not affect existing script based install.
...
ramdisk.sysinst should work unchanged for i386 also. Would be good to merge
after 1.4.
1999-04-30 05:09:43 +00:00
c5a82dd848
* New MI man page for fp{set,get}{round,sticky,mask}(3).
...
* Implement fpgetsticky() for alpha.
* Direct fpsetsticky() and fp{get,set}mask() into alpha kernel via sysarch(2).
* Define new sysarch(2) stub for above and install and distribute sysarch.h
for alpha. (The fpcr IS user mode r/w, but for reasons beyond the scope
of a commit message kernel calls are needed.) And much kernel Magick is
required before these do anything, but this way programs compiled under
1.4 will DTRT on future snapshots and releases.
1999-04-30 00:58:30 +00:00
dc8601cb76
Mention Token-Ring cards supported by the tr(4) driver.
1999-04-29 21:49:51 +00:00
4bee9b1689
Update mac68k set sizes for 1.4
1999-04-29 20:21:34 +00:00
115fa7a4ac
Add sysstat.
1999-04-29 20:15:30 +00:00
e609fe69c7
Add missing sponsors from the WWW page. Reorganize as there (individuals
...
and organizations seperately).
1999-04-29 19:27:27 +00:00
0ec95d34b3
update sponsor list from WWW page. split into individual and organization section, like there.
1999-04-29 19:27:26 +00:00
22939f25dd
Add target used when importing INSTALL.more to sysinst images.
1999-04-29 19:03:03 +00:00
6f951a52eb
Import INSTALL.more a better way.
1999-04-29 18:57:31 +00:00
638ae929a5
Add tr.4 man page.
1999-04-29 16:43:33 +00:00
f14052bc95
Use \- instead of \*- (to get a dash instead of a hyphen)
1999-04-29 02:34:54 +00:00
a7158cb71c
A note enumerating the final subtree build targets.
1999-04-29 02:32:16 +00:00
f344b99e97
Add `disk' target that does the dd(1).
1999-04-29 02:17:43 +00:00
cdc2780d60
term type, sun -> vt100
1999-04-29 01:23:53 +00:00
f290c42dd1
Atari X11 related updates
1999-04-28 19:33:41 +00:00
eb49506c14
fix typo.
1999-04-28 19:03:44 +00:00
167d50274d
Reorganize hardware list and bring it up-to-date.
1999-04-28 19:02:56 +00:00
5c7be261d4
disable the "install" target in a way which works if other "install"
...
rules are present
1999-04-28 09:18:13 +00:00
30c61c3427
Warn users to quite their PPC co-CPU before booting NetBSD from AmigaOS.
1999-04-27 19:05:16 +00:00
e3fbc0265a
update:
...
-i386/stand/biosboot_ser was removed a while ago
-wscons related manpage changes
-new mbr(8) manpage
1999-04-27 18:38:44 +00:00
3c8d976886
Install install kernel as install.gz not netbsd.gz.
1999-04-27 12:18:47 +00:00
ae59152eea
Oops, install both the install kernel and diskimage.
1999-04-27 12:14:00 +00:00
9de21096d9
Add a beforeinstall target to bomb out if RELEASEDIR isn't set.
...
There's probably a prettier way of doing this...
1999-04-27 12:05:05 +00:00
766f40edeb
Add BINDIR and an install rule to install into ${RELEASEDIR}${BINDIR}.
1999-04-27 12:03:39 +00:00
f76b42c7a5
Make the "all" target depend in the ramdisk image and not the crunched
...
binary.
1999-04-27 01:37:13 +00:00
1ba2319263
Gzip the diskimage.
1999-04-27 01:34:49 +00:00
7d8031561f
Adapt minimum memory and disk requirements to reality:
...
- due to a pmap bug, really low memory booting doesn't work
- NetBSD-1.4 needs much more disk than earlier releases.
1999-04-26 19:29:45 +00:00
655935bd49
Remove comments about additional bootblock remarks, and add additional
...
remarks about bootblock limitations where they were missing.
1999-04-26 19:18:23 +00:00
5baac5a0fb
Disable line editing for the ftp-scripts. Apparently, this is what makes
...
ftp installs work again.
1999-04-26 10:50:44 +00:00
4a2304f936
Cleanup to work on sparc again
1999-04-26 05:04:50 +00:00
c039b53a2a
Add macppc part.
1999-04-26 01:04:45 +00:00
9c98d224c6
Remove ld.so.conf.
1999-04-26 00:29:15 +00:00
21fbe5b6d3
Enter the notes subdir before entering the machine directories.
...
This is needed, at least for the alpha, to get the INSTALL.more doc.
1999-04-25 12:05:36 +00:00
21c19e9e8e
Atari specific file list to xbase
1999-04-24 20:03:45 +00:00
2b52f90af2
install documentation for the next68k port, contributed by Matt Debergalis
1999-04-24 18:47:14 +00:00
2474822860
add lmcctl.8
1999-04-24 18:13:19 +00:00
2aa563c6ba
* Don't use fancy mdoc features that don't yet have good HTML mappings.
...
* Fix typos
* Tweak style
* Edit scheduler enhancements bullet item
1999-04-23 23:09:03 +00:00
fa6ffabd98
Fix header inversion caused by untracked macro package change.
1999-04-23 22:47:16 +00:00
944dc00f76
* Umm, the installboot(8) run is important. Don't ignore errors!
...
* Use the current boot program schema.
1999-04-23 19:10:54 +00:00
d9a5400fdc
add cjs to releng, rm cgd from releng for 1.4, move hpeyerl to contributors.
1999-04-23 15:25:41 +00:00
1c0011369f
Remove Waldi Ravens from the contributors list.
1999-04-23 12:33:13 +00:00
ce26a3ede3
Add a list of devices that are 'New' for 1.4. Don't pretend that all
...
devices supported are listed.
1999-04-23 12:17:27 +00:00
9751244932
md_post_newfs() should return int.
1999-04-23 01:38:35 +00:00
3bb2867f5a
Document some of the 1.3 -> 1.4 features.
1999-04-23 00:04:07 +00:00
70f6413687
Add list item and description for installation/instkernel/ [netbsd.gz]
1999-04-22 18:56:55 +00:00
bc3f764726
Put -B be in NEWFSARGS
1999-04-22 04:32:12 +00:00
f285585974
Use the first word of `sysctl -n hw.model` to identify the kernel arch.
...
(to decide which kernel to install in the new root)
1999-04-22 04:29:49 +00:00
bfde703554
Be more accurate about the RAID levels currently supported by RAIDframe.
1999-04-21 15:38:09 +00:00
eec6041cf5
An empty stub routine should return success not failure!
1999-04-21 11:55:07 +00:00
a5f47bb12c
X68k portmaster change.
1999-04-20 14:30:32 +00:00
6f626b2c13
Add dist/*_obsolete files, used by sysinst. These files have been manually
...
generated from distrib/sets/lists/*/obsolete{mi,i386} files. A better
way to get them should be found ...
1999-04-19 23:55:28 +00:00
0fd0e10d43
Discuss netboot on 3000/xxx and other old SRM systems. Reported by Charles.
1999-04-19 23:38:38 +00:00
f4f212fdef
Two changes.
...
- Now that fsck is only the wrapper for fsck_*, ffs upgrade options
should passed through with -T option. fsck_ffs is also required to
be copied with fsck.
- fsck_ffs may request large memory when the partition is big.
Configure swap device even when the RAM > 4MB.
1999-04-19 22:44:37 +00:00
6030338702
Add svr4_machdep.h.
1999-04-19 21:34:16 +00:00
ed50b0305d
add # comment character in front of RCS Id.
1999-04-19 21:09:59 +00:00
aded74faa1
Update the set split counts for floppy installation to match reality.
1999-04-19 13:17:09 +00:00
3bfdbeb280
Add MLINKS-generated entries for pool_*.9 and resort pool_*.0 entries.
1999-04-19 04:56:18 +00:00
b51089597f
Really really really say goodbye to old wscons. I mean it this time.
1999-04-19 04:20:13 +00:00
6c1e99c770
Add a NetBSD RCS tag to each distrib list file.
1999-04-19 03:11:31 +00:00
d727686794
Ignore lines starting with a ``#'' in the set list files.
1999-04-19 02:33:40 +00:00
8d5192534f
Include the symlink from /usr/X11R6/bin/X to Xpmax.
...
Delete the preceding directories - they exist in xbase.
1999-04-19 02:26:11 +00:00
17d18eb235
NetBSD/pmax now uses the X11R6 X server.
1999-04-19 02:03:27 +00:00
f9b0d69d7d
use an async mount for building the miniroot filesystem
1999-04-18 21:01:57 +00:00
86417913a0
Which is the tmp_dir (the directory which contain CHANGES or that of
...
base.tgz) was a FAQ. Note more clearly.
1999-04-18 14:34:52 +00:00
c723b88c83
Add the HyperCom 3+ and 4+ Zorro bus boards to the list of supported devices.
1999-04-18 10:50:17 +00:00
e491f2661b
Don't frob the interals of a WINDOW*, use the getmaxx() and getmaxy()
...
macros.
1999-04-18 04:09:27 +00:00
a6f74f04cc
Add Xwrapper.
1999-04-18 00:27:59 +00:00
79d966cf9c
Add ./usr/X11R6/lib/X11/xkb/symbols/sharp/jp.
1999-04-18 00:27:36 +00:00
be94008d5a
Fix misspelling.
1999-04-17 16:18:18 +00:00
b3073fc684
Disklabel prototype for a 2MB diskimage based on the ramdisk filesystem.
1999-04-17 11:03:52 +00:00
a5ea794895
add lmcctl.8 to man page list
1999-04-16 23:45:27 +00:00
d765b81230
Add: ./dev/mouse; Move /sbin/bootpref -> /usr/sbin/bootpref
1999-04-16 19:39:15 +00:00
6dfb452528
Fix incorrect pathname in previous.
1999-04-16 16:08:28 +00:00
daa30e7063
After building a ramdisk kernel, build a small (currently 2MB) diskimage
...
suitable for dd'ing onto the start of a disk.
Duplicates some of the work done by the miniroot Makefiles and will
cleaned up and made MI soon.
1999-04-16 16:01:33 +00:00
af43093feb
Remove ./usr/libexec/ld.so - the compat13 package takes care of this.
1999-04-16 15:45:42 +00:00
c6f8d15017
md_post_newfs() now returns int after the latest round of changes.
1999-04-16 15:42:32 +00:00
895e3323a5
Build a tar file of the ramdisk.fs suitable for installing on an NFS
...
server for diskless installs on machines that can't netboot a kernel
with a full ramdisk.
1999-04-16 14:12:14 +00:00
15fcd84c71
Define the disklabel prototype as a conditionally set variable so that
...
it can be overriden.
1999-04-16 13:31:40 +00:00
5849ceb510
Install second-stage bootblock.
1999-04-16 13:28:22 +00:00
7e09f8d2f8
Descend into sysinst directory if sysinst/arch/${MACHINE} exists.
1999-04-16 10:10:24 +00:00
3a4b99f66e
Make this compile again.
1999-04-16 08:29:15 +00:00
5da713368c
Add mbr_bootsel.
1999-04-15 22:41:24 +00:00
148b5a16aa
Add /usr/mdec/mbr_bootsel
1999-04-15 22:33:47 +00:00
4b6070dc9f
swapon only if physmem <= 4MB.
...
swapon before fsck. This is needed if the connected disk is large.
Other message cosmetics.
1999-04-15 15:21:41 +00:00
cb06a1c589
swapon only if physmem <= 4MB.
...
Other message cosmetics.
1999-04-15 15:20:21 +00:00
011b07d1a9
Now that the md driver forcely turn on RB_SINGLE, no warning is
...
presented at boot time.
Also note for /start script.
1999-04-15 15:18:21 +00:00
14ee1bfb19
Mention a couple of port-specific new features.
1999-04-15 14:49:11 +00:00
88c3275af3
Add wclear()/wupdate() before MSG_makedev, bits of the previous screen
...
were left.
1999-04-15 12:25:54 +00:00
36013c11f2
Add entries for pool_*.0
1999-04-15 12:25:37 +00:00
5a42169d65
Update to reflect current status.
1999-04-15 11:45:57 +00:00
d69ac94192
Make this compile again (a return -> return foo was missed when
...
md_copy_filesystem was made to return an int in 1.10).
1999-04-15 05:01:04 +00:00
de3024ade3
Correct some bugs in mbr handling, which could lead to invalid partition
...
tables being written on disk:
- when counting non-BSD partitions, use part[i], not part[0]
- when using full disk for NetBSD, initialise all the fileds of the
mbr entries (especially flags)
- When converting to on-disk format, if start and size = 0, initialise
c/h/s to 0 for both start and end. convert_mbr_chs() would make an entry
0/0/0, 0/0/1 which is not bogus, but not what we really want either.
1999-04-14 16:00:42 +00:00
2feaabda38
Run /start in the same shell.
...
Reduce memory use.
1999-04-14 14:18:44 +00:00
8d05bb55f9
G/c of the deleted programs.
1999-04-14 14:12:30 +00:00
50224771ef
Descend to the utils dir for targets clean and depend.
1999-04-14 14:11:56 +00:00
0e3751fa5f
If there is no files to delete, return 1 (success), not 0.
1999-04-14 12:47:27 +00:00
7861ee80e8
List of obsoletes files for each sets, split in mi/md parts.
...
These lists have been build concatenating distrib/sets/lists/ files for each
NetBSD releases since 1.0, and diffing this with the corresponding 1.4
file.
These files are used to build the /dist/xxx_obsolete files used by sysinst.
1999-04-13 20:30:00 +00:00
8d7cb08335
Main change: add a cleanup_dist() function in util.c which will do the needed
...
cleanups before extracting a set. Should'nt do anything for an install,
as the filesystem shouldn't contain files that need to be removed.
cleanup_dist() is called before extract_file() for each set (the set name
is passed as parameter). It will open a file /dist/<set name>_obsolete
if it exists. This file should contain a list of files (absolutes
pathnames) that needs to be removed. cleanup_dist() will lstat() each file
to determine if it's there and if it's a directory or not.
It will then unlink() entries that are not directories and then rmdir()
directories. If a directory is not empty (it should now if the list of files
is correct) it will be renamed to <directory.old> and the user will be warned.
Other changes:
- move prototype of target_prefix() in defs.h, don't maintain a copy
of it in each file.
- in install.c, after MSG_disksetupdone, do a wclear(stdscr) (display was
clobbered after it).
- kill MSG_openmsgbuf, it's not used anywhere
- after MSG_disksetupdone in upgrade, don't call MENU_ok, do it the
same way as in install.
- add wclear(stdscr);/wrefresh(stdscr); before calling MENU_distset (another
display problem ...)
- While I'm there, move ask_verbose_dist() before MENU_distmedium. This way,
if all go well the user can go away one ftp starts and come back once
sets are extracted.
1999-04-13 20:17:47 +00:00
51ec3af2ba
Identify binaries that were moved or removed between 1.3 and 1.4
1999-04-13 19:14:47 +00:00
5c7e21f9cb
- Add a message explaining the user how to specify units for inputs
...
- in run_prog(), do an explicit wclear(stdscr); wrefresh(stdscr);
before launching subwindows. This seems to solve all the display
problems associated with run_prog().
1999-04-13 14:49:56 +00:00
2c4e2ccda8
Actually use MDSETS, so that ports can install the x sets if useful
1999-04-12 22:17:21 +00:00
1add6cf5ed
Must have ld.so (+ some more) in vax distribution nowadays.
1999-04-12 18:01:36 +00:00
4342da248f
Size hacks.
...
Use libhack, x_route, x_ifconfig, init_s in the distrib/utils
to reduce the ramdisk size.
1999-04-12 16:06:36 +00:00
0b62da153e
Add notes from SUNAGAWA Keiki <kei_sun@ba2.so-net.ne.jp>.
1999-04-12 13:46:25 +00:00
974e6e2609
Also add ASUS PCI-DEC100TX+ to the list of tulip-based boards.
1999-04-12 09:46:11 +00:00
a7af910c55
Another Tulip-based board which works: DLINK DFE500-TX.
1999-04-12 09:42:35 +00:00
be743ed36b
- Add 2 functions in label.c, getpartoff()/getpartsize() used to let the user
...
enter partitions offet and size. The user can chose unit independantly of
the unit used for display ('M'/'c'/'s'). These functions do the proper
bound checks and alignement/roudups. Used in the edfspart menu and
i386 md_make_bsd_partitions() (other ports should do the change as
well).
- now that getpartsize() does the rigth thing, kill the swapadj hack (which was
buggy anyway).
- in i386 md_make_bsd_partitions(), don't propose defaults that don't fit on
the disk. If the disk is too small, fallback to custom instead.
- fix a bug in mbr.c, where the partition flags would not have always been
reset. sysinst created me a MBR with 2 active partition. The boot code
doesn't like it :)
- added a message for eventual mount failures.
- killed donewfs and extracting messages, as we run the commands in a
subwindow these messages just flashed on the screen.
- Changes a few exit(1) to return(1), to give the user a second chance.
- added msg_clear() or wclear(stdscr) in a place or two, to make
display a bit nicer.
- in run_cmd(), if the command succeeded, don't wait for the user to
press enter.
1999-04-11 22:40:19 +00:00
d880ae0c98
We do support the CyberSCSI Mk3/PPC now
1999-04-11 15:12:49 +00:00
528ffedc08
Allow the floppy directory to be built when someone does "make release"
...
in /usr/src on a pc532.
1999-04-11 13:22:10 +00:00
9864c40a31
The 167Bug> boot command line was not quite correct.
1999-04-10 16:18:11 +00:00
546c12c03b
Modify the example on setting the date/time so it is kosher for 1999.
...
Fix the 'bo' command example for booting from tape on mvme167.
1999-04-10 16:16:11 +00:00
16f231aad1
Don't try to build our own pwd_mkdb when building the diskimage.
1999-04-10 03:59:58 +00:00
8f1f6ecaa6
new version number syntax due to new formatting;
...
yet another release...
1999-04-09 20:55:28 +00:00
fb618761b7
Make this compile again... fix a couple of small typo's
1999-04-09 12:44:44 +00:00
72d28a06a3
Oups, missed a lot of run_prog() calls when I changed the prototype.
1999-04-09 10:43:56 +00:00
04f9354ab3
Some fixes for the do_install() function:
...
- Make all the functions called from do_install() return an error code,
so that we can abort install if something went wrong.
- Add a 'errstr' argument to run_prog(), which if not NULL is displayed
with msg_printf() and followed by process_menu(MENU_ok) if the command fail.
Used to warn the user that the current action is aborted.
- in a few places use msg_display() or msg_printf() rather than printf.
It seems that stdout/stderr are not always pointing to the active curses
window.
- garbage-collecd unused messages, add a few new one (error handling).
XXX only tested on i386. Other md parts should be tested as well.
1999-04-09 10:24:38 +00:00
c672e5ca96
- add more i-nodes to ramdisk image
...
- make ramdisk/list work again with object directories
- make OS revision part of the images file names (like miniroot).
1999-04-08 21:17:14 +00:00
a17071efea
Sync with .eng versions.
1999-04-08 12:54:52 +00:00
c67241f483
Create an ex(4) man page from a little driver reading. Very bare bones;
...
needs to have the diagnostic list explained, and the media support
list filled out before it gets pulled up to the 1.4 branch.
However, it's here to answer PR#6870
1999-04-07 21:48:52 +00:00
957dabcbcd
Forgotten from last commit.
1999-04-07 15:28:01 +00:00
ce03570956
Do not remove netbsd.INSTALL and netbsd.INSTALL.gz.
1999-04-07 14:30:52 +00:00
1c15941926
Remove any leading '/'s in the pathname component of the FTP URL.
...
When the complete URL is constructed, and '/' is inserted between
the hostname and the pathname components.
1999-04-07 13:09:55 +00:00
884b75e9f3
adjust for changes in alpha /usr/mdec files.
1999-04-07 06:47:49 +00:00
f04624dfbf
Remove single quotes from the ftp URL and remove the comment about
...
"protecting the URL from the shell." run_prog() now breaks up it's
argument and calls execvp() directly, so there's no shell to be wary
off...
1999-04-07 05:18:49 +00:00
d7f2b03827
update for changed alpha boot blocks and manual pages
1999-04-07 00:44:02 +00:00
bfb9b83441
Fill the x68k-specific portion.
1999-04-06 14:49:01 +00:00
8ea4699fac
First round of corrections for the atari.
1999-04-06 12:33:38 +00:00
b8f166d4da
Fix menu item number.
1999-04-06 09:31:40 +00:00
5010389530
regen
1999-04-06 03:59:11 +00:00
e8f5904d9e
Move prototype for disp_cur_part() from defs.h to mbr.h.
1999-04-05 06:59:36 +00:00
277c24dc4c
Don't include <sys/disklabel.h> - "defs.h" does this us with the
...
right #defines so that we get the filesystem type names.
s/fstype/fstypenames/
1999-04-05 06:24:17 +00:00
39813aa161
Build an ELF kernel called netbsd instead of an a.out kernel called
...
netbsd.aout.
1999-04-05 06:17:44 +00:00
63dd859cad
Add pax, cpio.
...
Remove installboot.
Add ptys to MAKEDEV command line.
1999-04-05 06:15:30 +00:00
56ff27242a
Add cpio link to pax.
1999-04-05 06:14:18 +00:00
0f2eecb8c3
add aculog
1999-04-05 00:22:47 +00:00
simonb