f5cbfb9db1
(woops; forgot this one) make ec and we go away.
1994-01-25 04:24:59 +00:00
1ebef90c46
make ec and we go away ....
1994-01-25 04:23:04 +00:00
b2ce654241
Add ep driver
1994-01-22 19:19:14 +00:00
d8f4f2b929
add nearly every option known to man, and clean up
1994-01-16 01:38:07 +00:00
82a0744073
turn on SYSVSHM and note the default value of SHMMAXPGS
1994-01-16 01:36:15 +00:00
aebed65bf3
add SYSV*
1994-01-13 04:30:10 +00:00
62af8f99cc
clean up and trim some
1994-01-09 23:57:00 +00:00
5b94c9652a
add entries for the 'audio' pseudo-dev and for the new soundblaster driver
1994-01-09 19:27:36 +00:00
84ab77272a
*chuckle* -- i ran out of bpfilters.... (don't ask)
1994-01-09 18:21:10 +00:00
5fc4970c26
code reorg
1994-01-08 11:12:15 +00:00
48b5ac1a52
add 'maxfdescs 2048' to everything. i'm sick of the warning...
1994-01-06 12:07:41 +00:00
c8fbd64ff5
Remove explicit link addresses.
1994-01-05 17:17:17 +00:00
243ce5b9bf
*** empty log message ***
1994-01-05 17:05:56 +00:00
b7309d4800
don't include KERNFS and FDESC
1994-01-05 16:30:17 +00:00
e09a770e77
add some options
1994-01-05 16:28:55 +00:00
07e22c53b9
LOAD_ADDRESS is now fixed at 0xf8100000.
1994-01-05 16:03:32 +00:00
61cf5bd904
add LKM
1994-01-04 14:06:23 +00:00
debf054992
compile genassym -static as suggested by Jim McKim <mckim@lerc.nasa.gov>
1993-12-30 06:56:48 +00:00
b0603af6e5
fix typo pointed out by Rich Murphey
1993-12-23 07:28:41 +00:00
c0f153885d
alphabetize... again
1993-12-22 13:11:03 +00:00
ac8be1b959
Add pseudo-device vn
1993-12-21 05:27:35 +00:00
fb9b8e7923
add DIAGNOSTIC to each
1993-12-20 10:07:58 +00:00
122460dca2
Clean bogus arguments to newvers, and don't pass KERN_IDENT any more.
1993-12-18 04:23:04 +00:00
11d78045d5
correct docs
1993-12-15 01:06:55 +00:00
e24af4c37c
what the heck; i've got tunnel drivers now too
1993-12-13 05:03:18 +00:00
40be71a246
bump up number of SLIP pseudo-devs to 4
1993-12-10 16:22:58 +00:00
e4f36e2ea9
Remove excess cruft. This machine has too little memory for unused baggage.
1993-12-10 08:55:32 +00:00
7e2c70ce74
Add random.s for multicast stuff.
1993-12-10 05:38:37 +00:00
c05bd599a0
i have an ep
1993-12-04 01:20:51 +00:00
8ca56a8a85
ep driver..
1993-12-03 12:02:38 +00:00
c69bc4a95f
I have a scsi controller now!
1993-12-03 05:31:03 +00:00
0977b6ec81
add ep driver
1993-12-03 02:58:42 +00:00
3956e86fbd
Enable mcd0.
1993-11-29 18:19:29 +00:00
7095375da9
Enable ch*.
1993-11-29 04:59:26 +00:00
aadbc0a6da
Remove explicit port for ahb[01].
1993-11-29 01:03:44 +00:00
4e20653888
Enable ahb[01].
1993-11-29 00:39:21 +00:00
6ac9e15bb1
New test config.
1993-11-28 10:50:44 +00:00
4acf267f87
Enable uha[01].
1993-11-26 10:50:36 +00:00
003abe0b84
Enable st and cd.
1993-11-25 08:01:13 +00:00
11ba2e43d8
Enable aha[01], sd*.
1993-11-24 03:26:04 +00:00
7377ae9734
Support for ESIS over X.25 is not complete.
1993-11-14 19:40:47 +00:00
9c68389ee6
Junk PARANOID.
1993-11-14 17:58:12 +00:00
c237d6b7d7
Fix typo in last change.
1993-11-14 17:42:19 +00:00
bc94b1cf89
Add a few things that were missing, and fix some comments.
1993-11-14 17:41:37 +00:00
fa0d8faf42
Update from trunk:
...
Add the System V message queue and semaphore facilities. Implemented
by Daniel Boulet <danny@BouletFermat.ab.ca>
1993-11-14 14:45:16 +00:00
c5446cd8e0
add SYSVMSG and SYSVSEM
1993-11-14 14:40:44 +00:00
5aa77a4ddc
Enable ie0.
1993-11-08 20:10:32 +00:00
6ca8998c91
GENERIC: add mcd0
...
TEST: add mcd0, commented out
files.i386.newconf: add support for mcd driver
1993-11-04 09:28:26 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
3bb5fc8b74
Enable is0.
1993-11-03 21:32:45 +00:00
fa3ccaa273
Change comment about pms.
1993-11-03 13:29:37 +00:00
e163596ee8
Fix some comments and enable tb.
1993-11-03 12:48:31 +00:00
6c77f913e9
I have pms. ;-)
1993-11-02 20:40:57 +00:00
3e21ea2e33
tablet line discipline compiles and probably works now.
1993-11-02 06:19:24 +00:00
a74a4778b9
Enable fdc1 and assign it drq 3.
1993-10-29 20:38:46 +00:00
8bef6d7b03
Enable ed.
1993-10-29 04:33:34 +00:00
787c131944
Remove bogus port for pccons. Remove ACCOUNTING.
1993-10-26 12:19:38 +00:00
4d9cffef5e
Hard-wire the timer IRQ.
1993-10-26 12:18:28 +00:00
f1dda6c852
Add intr.c.
1993-10-22 19:17:32 +00:00
430d001c1a
get rid of ACCOUNTING option. it's mandatory, and there's no define any more.
1993-10-20 23:04:52 +00:00
27bc255b86
kill accounting.
1993-10-18 23:22:56 +00:00
9eafd05204
Add I486_CPU.
1993-10-18 16:25:42 +00:00
f8b564f223
Fixed typo.
1993-10-18 14:35:45 +00:00
593a6c40ef
Explicit entry point specified in kernel link command.
...
(so far, we've been lucky only because vers.o doesn't contain text)
1993-10-17 20:56:09 +00:00
7e8063835d
Use `swap generic'.
1993-10-16 07:48:04 +00:00
5448e175cf
Only include isa/dma.c if a driver which needs it is configured.
1993-10-14 05:17:24 +00:00
a1c3bf517a
use the new location for libkern, auto-depend on it, and include
...
the right one, for profiling or non-profiling.
1993-10-13 06:43:17 +00:00
4cbf1951c1
Put back assembler versions of setrq() and remrq(). GCC 2 is just too lame.
1993-10-09 22:49:29 +00:00
c8431a9508
Add locore2.c as standard.
1993-10-09 22:17:36 +00:00
99e736549a
Remove `device-driver' flags.
1993-10-09 08:55:24 +00:00
f51618137b
genassym needs a dependency...
1993-10-09 00:31:21 +00:00
d4435d2bd4
get rid of excess target line for machdep.o
1993-10-06 21:19:11 +00:00
004534e441
Add FASTLINKS.
1993-10-06 12:15:33 +00:00
501c1b99ad
Add cy.
1993-10-06 12:14:31 +00:00
81a9642670
Added entry for Cyclades Cyclom-{4/8/16}Y multiport async serial board
...
driver.
1993-10-06 09:31:30 +00:00
4d4bfb2287
*** empty log message ***
1993-10-01 04:00:45 +00:00
e57ef97529
Add LKM.
1993-09-30 20:15:25 +00:00
83f32ad82b
Add needs-flag (or needs-count for tty devices) to all driver in the
...
switch tables. Remove ancient ethernet drivers.
1993-09-30 20:14:55 +00:00
845512b39a
TEST: Enable com ports.
...
files.i386.newconf: Add needs-count to com.c for now.
1993-09-30 17:30:32 +00:00
81c776a8e4
Enable mms.
1993-09-29 15:24:41 +00:00
c27a6e4acf
Fix TIMEZONE specs; add DST.
1993-09-29 06:57:10 +00:00
5085e2ca53
files.i386: Defunct.
...
files.i386.newconf: Remove lpa.
TEST: Enable lms and lpt.
*: Change all lpa's to lpt's. Change fd[0-3] to fd* and wd[0-3] to wd*.
Remove all explicit irq's.
1993-09-29 05:37:29 +00:00
3540378534
GENERIC, TEST: Remove all irqs.
...
std.i386: Re-add clock0 and timer0.
1993-09-24 08:45:03 +00:00
2dc346f0d1
add accounting
1993-09-23 21:31:56 +00:00
d0b8b43cf2
Add USER_LDT option.
1993-09-19 19:11:24 +00:00
ff02097496
No need to lospecifiy load address at 1M, now the default for any kernel.
1993-09-14 20:01:19 +00:00
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
5823e758f1
Remove SYMTAB_SPACE from config so that boot symbols are used.
1993-09-13 18:19:26 +00:00
7d2eb9e6b6
Default LOAD_ADDRESS at 0xfe100000 (1M)
1993-09-13 15:28:23 +00:00
b119f3ec4f
Add MACHINE_NONCONTIG option
1993-09-13 14:22:42 +00:00
0d2e8f0fcb
Link with libkern.
1993-09-11 00:14:13 +00:00
0230178143
Clean up deleted files.
1993-09-07 02:25:20 +00:00
a6b1318c68
Adding the (non-optional) option MACHINE_NONCONTIG
1993-09-07 00:56:05 +00:00
515949e42e
Add a bunch more shit that was missing.
1993-09-07 00:36:27 +00:00
5be4167214
Rearrange SCSI probing to actually work.
1993-09-07 00:25:50 +00:00
0dc9a11469
Rearrange ethernet probing in the vain hope that maybe, just maybe, the ne0
...
probe's effect on ed0 will be reversed when the latter is reset.
1993-09-06 23:35:19 +00:00
8c7f0d2e48
Comment out we0 and ec0, and add equivalent ed0 and ed1.
1993-09-06 23:31:33 +00:00
5e532f3f9f
Add a generous dose of comments.
1993-09-06 23:29:33 +00:00
a75978c2e0
Change `NFS' to `NFSSERVER,NFSCLIENT'.
1993-09-06 21:15:56 +00:00
229a34c6b3
Correct I/O ports for mice.
1993-09-06 18:37:56 +00:00
hpeyerl