372f11b657
The ARM, Ltd. floating point emulator has moved to arch/arm.
2001-11-24 01:43:20 +00:00
fc2c469259
The ARM, Ltd. floating point emulator has moved to arch/arm.
2001-11-24 01:27:11 +00:00
87fe867c21
Move the ARM, Ltd. floating point emulator to arch/arm.
2001-11-24 01:26:23 +00:00
598f003e0a
More G/C.
2001-11-24 01:16:54 +00:00
1cfe216e3b
Garbage-collect more acorn32-specific stuff.
2001-11-24 01:15:36 +00:00
99ae803762
Gerbage-collect a lot of stuff long since moved to arch/acorn32.
2001-11-24 01:11:51 +00:00
7c92f5c3a7
add a VTOC macro that doesn't cast, and fix a spurious lvalue cast with it.
2001-11-24 01:11:34 +00:00
1a60d78375
These files are no longer used; the Acorn RiscPC port is now
...
NetBSD/acorn32.
2001-11-24 01:02:21 +00:00
ef9741def9
No need to install bootconfig.h
2001-11-24 00:57:43 +00:00
c21931cf1d
Make this respect down interfaces.
2001-11-24 00:21:27 +00:00
2e546f76dd
Don't need "options PROG32" anymore.
2001-11-24 00:11:00 +00:00
2e3553d407
Make sure to hook into DDB/KGDB if so requested.
2001-11-23 23:48:07 +00:00
49592e9870
No need to install irqhandler.h
2001-11-23 23:34:48 +00:00
bb23eba3d8
MCA DMA hooked via bus_dma, so remove one
...
add entry regarding AHA-1640 (the driver needs testing)
2001-11-23 22:57:34 +00:00
07312f0fbb
Convert over to use the new MCA DMA facilities, which encapsulate
...
the MCA DMA controller access. This also means we gain >16MB RAM support.
While here, overhaul the driver to saner state, especially:
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* put all string arrays used by edc_dump_status_block() within #ifdef EDC_DEBUG,
and use numbers instead if it's not defined; this cuts object size by 5KB
* other misc cleanups
2001-11-23 22:53:09 +00:00
90fac765da
add 'drive' locator to mca edc
2001-11-23 22:35:46 +00:00
9b6f5a226b
macos partition tables appear to use 512 bytes per record rather than
...
1 sector per record. change the label code to use the same layout
so that CDs with macos partition tables work.
2001-11-23 22:31:22 +00:00
851fb345aa
add mca_dmamap_create() prototype for MI code
2001-11-23 22:29:16 +00:00
ed11067c01
Properly glue in the MCA DMA controller support, using bus_dma
...
interface, using the code from dev/mca/edc_mca.c:edc_setup_dma()
as a base. Use ISA routines for dmamap/dmamem functions, primarily
to get the buffer bouncing for >16MB RAM machines. The MCA DMA
channel is stored in unused upper 4 bits of ISA DMA cookie's
id_flags, hopefully that's not too disgusting :)
Export mca_dmamap_create(), which returns map suitable for further DMA
operations using MCA DMA controller.
mca_busprobe(): also report if machine has 32bit DMA (feature byte 2
bit 1)
Use symbolic names for DMA controller commands - I've finally got
info what they mean from Tymm Twillman's Linux include/asm/mca_dma.h.
No more magic constants! Also fix bug in the way DMA counter has been
setup - for 16bit DMA, it's necessary to tell the controller _half_
the byte count. This was wrong in the former code.
2001-11-23 22:24:36 +00:00
bf7f67be85
if the LKM support is not compiled in, don't bother using exec_lock
...
at all, it's only needed in LKM case
use #if defined(LKM) || defined(_LKM) condition for netbsd32_execve.c,
to DTRT when either compiled statically into kernel with LKM support,
or compiled as a LKM
2001-11-23 22:02:39 +00:00
a106161b5a
add spaces for KNF. confirmed to produce identical objects.
2001-11-23 21:44:25 +00:00
b8ed19b4ef
No longer need <machine/undefined.h>.
2001-11-23 21:23:30 +00:00
fc019be5fd
Use <arm/undefined.h> instead of <machine/undefined.h>.
2001-11-23 21:18:29 +00:00
597c20c6d6
Don't need a <machine/profileio.h> on these platforms.
2001-11-23 20:56:27 +00:00
dbbad6df48
profileio.h is a Shark-specific header, so don't reference an
...
ARM-generic verion (it's going away).
2001-11-23 20:47:17 +00:00
0a824f32cb
No longer need <machine/pte.h>.
2001-11-23 20:43:03 +00:00
a41a73c44a
No longer need <machine/cpus.h>
2001-11-23 19:51:32 +00:00
889b84bdfc
Use <arm/cpus.h>, not <machine/cpus.h>
2001-11-23 19:46:35 +00:00
0ab1aedd0d
No longer need <machine/cpufunc.h>
2001-11-23 19:40:45 +00:00
969599022a
Use <arm/cpufunc.h>, not <machine/cpufunc.h>.
2001-11-23 19:36:48 +00:00
0c57d87232
Use <arm/cpufunc.h>, not <machine/cpufunc.h>.
2001-11-23 19:21:47 +00:00
d60ef922be
Disable the BTB by default on the XScale again; there's some early
...
stepping errata to deal with before we can safely do this.
2001-11-23 19:17:04 +00:00
59f63c238e
Two changes to setrlimit(2):
...
* return EINVAL if specified current limit exceeds specified hard limit.
This behaviour is required by SUSv2 (noted by Giles Lean on tech-kern)
* return EINVAL if an attempt is made to lower stack size limit below
current usage; this addresses bin/3045 by Jason Thorpe, and conforms to SUSv2
2001-11-23 18:56:33 +00:00
5101f01dff
Move even more constants into the shared 32-bit vmparam.h header.
...
Cleanup elsewhere will have to be done before we can sanitize this
header any further.
2001-11-23 18:16:10 +00:00
0b5814f1b4
__FUNCTION__ -> __func__
2001-11-23 17:42:48 +00:00
15c76e3c84
- Move more contents of various <machine/vmparam.h> files into
...
<arm/arm32/vmparam.h> (mostly the stuff that's tied to the pmap
implementation).
- Since the MMU definitions in pte.h are specific to ARM processors
that support 32-bit mode, move pte.h to <arm/arm32/pte.h>.
- Make the Netwinder startup file build again (use PT_B|PT_C, rather
than PT_CACHEABLE, since the latter expands to a variable these days).
2001-11-23 17:39:03 +00:00
0ec8fbad4d
Extra whitespace removal.
2001-11-23 17:29:00 +00:00
fec02f1259
No need to pull in <machine/pte.h> directly.
2001-11-23 17:23:40 +00:00
299362f0ff
Pull in assym.h for __PROG32 (needed for IRQenable/IRQdisable macros,
...
which should probably be pulled out of cpu.h anyway...)
2001-11-23 16:53:07 +00:00
926df47ec4
Provide __PROG32 to assembly code.
2001-11-23 16:50:48 +00:00
0dff65d9f9
add missing simple_lock_init.
2001-11-23 16:21:31 +00:00
4c8f0c8ea9
Update for the new cache code.
2001-11-23 16:09:11 +00:00
9d6cd691b6
integrate BUILTIN_KERNEL_LOADER and KERNE_PATH into KLOADER_KERNEL_PATH.
2001-11-23 16:08:45 +00:00
6bd02d8e33
add #ifndef _LOCORE.
2001-11-23 15:48:40 +00:00
f4c8a80b47
Oops. Add in missing entry point settings.
2001-11-23 15:44:15 +00:00
c8dbbf25b2
all -> realall, so that "make dependall" works correctly.
2001-11-23 12:58:03 +00:00
71651851a4
Match against EPSON GT-9700F.
2001-11-23 10:31:54 +00:00
674f6e4d18
Regen.
2001-11-23 10:30:49 +00:00
9930efdacf
Add product id of EPSON GT-9700F.
2001-11-23 10:29:30 +00:00
fe972558c0
Use __func__ instead of __FUNCTION__.
2001-11-23 10:20:47 +00:00
4789a8840d
Provide compat definition of __func__ for pre-C99 compiler.
2001-11-23 10:19:47 +00:00
d8879382cf
Add 32B/l L1 D/I-cache ops for newer ARC machines.
2001-11-23 06:21:49 +00:00
155e541aa2
Instead of checking for previous usage, just append to some make
...
variables. Tweak some variables to provide for more uniform defaults.
Minor adaption to makefiles for already converted ports.
2001-11-23 05:18:59 +00:00
2bf2c362fb
The bridge(4) pseudo-device no longer requires the port to
...
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.
2001-11-23 05:00:22 +00:00
cdc819cd8a
Improve xfer abort sequence.
...
Fix another bug in qTD chain allocation.
2001-11-23 01:16:27 +00:00
6d8419a6cc
Handle Zip quirks differently.
...
Ugh! This driver need major overhaul.
2001-11-23 01:15:28 +00:00
6f95b070ca
Update mass storage protocol numbers.
2001-11-23 01:14:45 +00:00
1b1e4bd3d1
Remove hardcoded values for HZ (under different names!) from mcclock.c
...
and clock_machdep.h, so that now HZ can be any supported frequency of
the mc146818a/ds1287a RTCs.
Tested at 256Hz and 2048Hz.
2001-11-23 01:04:11 +00:00
37c8189778
Correct a comment.
2001-11-22 21:59:33 +00:00
d5c1ba9ed2
add a comment clarifying the DMA support, g/c the commented
...
out isa_dmacascade() call
some minor intendation changes, while here
2001-11-22 20:25:58 +00:00
5278f1771c
Remove kerndebug.h from non-Shark code (it's a Shark-specific header
...
file, and probably should be done away with anyway).
2001-11-22 19:19:48 +00:00
b9d3276c2e
No need for <machine/rtc.h> here.
2001-11-22 18:40:12 +00:00
b393d0d3f7
Kill <machine/katelib.h>. Any place that still uses it should just
...
reference <arm/arm32/katelib.h> until such time as all use of this
file has been purged from the face of the earth.
2001-11-22 18:34:30 +00:00
88bba2e5a4
Add cpu_cpwait() calls after TLB updates that are not expected to
...
be followed up by a pmap_update().
2001-11-22 18:24:43 +00:00
67fd41ddbf
Add 26-bit and 32-bit types.h files, which indicate the programming
...
model in use for a given platform (__PROG26 vs __PROG32), then pulls
in <arm/types.h>. Change each ARM port to pull in <arm/arm26/types.h>
or <arm/arm32/types.h> as appropriate. Change all references to PROG26
and PROG32 to __PROG26 and __PROG32. Eliminate the opt_progmode.h
header file.
2001-11-22 17:59:57 +00:00
5815e5f567
Fixed bus stuff to compile vrpciu.c (VR4131 CPU).
2001-11-22 14:22:30 +00:00
e7fb452657
Fix some debug code in bios_configure_memory().
2001-11-22 12:17:00 +00:00
944346b889
KNF, ANSIfy.
...
Change print_addr() to take an db_addr_t argument instead of a long.
2001-11-22 06:58:03 +00:00
973ad566f7
Update the CP0 register names.
...
Make some tables line up nicely.
Make print_addr() static.
2001-11-22 06:00:31 +00:00
5bf4d5554b
use little-endian crc on multicast hash for admtek chips.
2001-11-22 05:03:04 +00:00
7e84b9e1db
Add wscons devices.
2001-11-22 04:50:04 +00:00
7467533f5a
Improve dump routine slightly.
2001-11-22 04:31:01 +00:00
6e3a855c27
Fix a bug in qTD chain allocation.
...
Fix a qTD leak.
Handle out of memory conditions better.
My USB 2.0 CD-RW now mounts nicely and I can access files.
Performance is still lacking (it's at about 2Mbyte/s).
2001-11-22 04:20:49 +00:00
1eebb3fde3
Add patches for Mr.Coffee with OBP2.
...
Miscellaneous cosmetic changes.
2001-11-22 04:18:28 +00:00
85cae1f6d1
If we already have a boot device set, don't reset the slot/unit/partition.
...
Now my Challenge S boots multiuser with the new bootloader without stopping
to ask for boot/root devices.
2001-11-22 03:15:35 +00:00
b9f67baecf
<sys/sysctl.h> doesn't need to be after <uvm/uvm_extern.h> anymore, put
...
it with the other <sys/_foo_.h> include files.
2001-11-22 03:08:01 +00:00
3f9a8628df
we need to hold the pageq lock while calling uvm_page_unbusy() on
...
pages that uvm_page_unbusy() will free.
2001-11-22 02:42:37 +00:00
6c3e025b46
Nuke cleandir target override.
2001-11-22 02:18:24 +00:00
6e9ab4848f
Respect OSLoadPartition even if it doesn't come before SystemPartition in argv.
...
Add a few comments about the above.
2001-11-22 02:06:32 +00:00
b63ced481c
Note kernel load adress change.
2001-11-22 01:30:03 +00:00
60ae71115a
Change the kernel load address offset from 512K to 420K, the Irix
...
convention for debugging kernels.
2001-11-22 01:11:51 +00:00
b2fe046c8c
Move the kernel forward in memory, starting it 512K in from the
...
bottom of RAM. The bootloader is now loaded 2K in from the bottom
of RAM, so we need to make space for it.
2001-11-22 00:59:23 +00:00
aabfa72384
- Clean up the bootloader Makefiles somewhat.
...
- Build an ECOFF version of the bootloader as "boot". As a temporary
measure (due to a bug in libbfd which has not yet been fixed, but
for which a work-around exists as a patch), install and ELF version
of the bootload as well as "boot.elf". "boot.elf" will go away once
the toolchain issue is resolved.
2001-11-22 00:58:07 +00:00
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
5ac54229c9
Don't make the symlinks on clean rules as well as obj rules. Breaks r/o source
...
trees that haven't gotten to the make obj recursion part of make build
otherwise.
2001-11-22 00:14:20 +00:00
3bad9b1f33
Repeat James Chacon's fix from sys/lib/lib{kern,sa,z}:
...
Don't make clean and cleandir depend on the lib subdir.
Just check for it's existance before running the submake.
This makes it possible to run a make build (which runs
cleandir before make obj) in a r/o source tree.
2001-11-22 00:04:55 +00:00
3975cecee7
- Adjust bootinfo to work sanely in an ARCS world, and pass some
...
info along to the kernel (currently just the symbol table info).
- Don't bother with the startprog dance; we don't need to do anything
special, here, so just call the entry point directly.
- A bunch of random cleanup.
2001-11-21 23:33:17 +00:00
38afb59582
- Check for provided bootinfo from the bootloader. If we find it,
...
save off DDB symbol table information.
- Make loading of memory work reliably with the bootloader; for each
candidate memory type from ARCS (which now includes LoadedProgram),
check to see if the kernel is within that chunk, and load the pages
around it if it is.
2001-11-21 23:27:20 +00:00
741c7a2997
sbic -> wd33c93, in preparation for the core driver going into
...
sys/dev/ic.
2001-11-21 23:22:25 +00:00
07c4b937eb
prep has no special dependencies on pccons; remove.
2001-11-21 22:40:45 +00:00
482d429ddc
Install loader in /usr/mdec.
2001-11-21 22:14:51 +00:00
57bd30a92c
s/pmax/sgimips/ in comments.
2001-11-21 22:13:55 +00:00
2229499bfb
Don't make clean and cleandir depend on the lib subdir. Just check for it's
...
existance before running the submake. This makes it possible to run a
make build (which runs cleandir before make obj) in a r/o source tree
2001-11-21 22:10:54 +00:00
8390d1903a
Skip relocation if OpenFirmware already loaded us at the right address.
2001-11-21 21:38:00 +00:00
e2397b7f93
Change symtab info to unsigned longs.
2001-11-21 20:31:49 +00:00
4b1d2d4ce9
Add bootinfo stuff for NetBSD/sgimips. Changes to kernel and bootloader
...
forthcoming.
2001-11-21 20:29:31 +00:00
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
4e63f44f6c
Initial cut at a bootloader for NetBSD/sgimips, by Michael Hitch.
2001-11-21 19:09:06 +00:00
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
9c6275fe9e
Add a commented out ehci driver (for the adventurous).
2001-11-21 17:11:02 +00:00
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
df2b478d48
increase the value of maxusers to 16.
2001-11-21 11:28:09 +00:00
eca8404326
Don't use __func__ as variable. It prevents compilation.
...
Use __FUNCTION__ instead.
2001-11-21 09:08:38 +00:00
1029005107
Pay more attention to if the HC is being unplugged.
2001-11-21 08:18:39 +00:00
c23ea6c341
update outgoing ifp, only if tunnel mode ipsec is used. this is to
...
honor IP_MULTICAST_IF setsockopt on ipsec-over-multicast. sync with kame
2001-11-21 06:28:08 +00:00
bf755aea42
make it compilable without OHCI_DEBUG
2001-11-21 05:52:50 +00:00
0cbd8ee484
pccons is not used by acorn32.
2001-11-21 03:43:13 +00:00
c907a8fbbd
Add missing }
2001-11-21 02:47:07 +00:00
4f7b354305
Set up control xfers.
...
Handle xfer timeouts.
Better debug messages.
2001-11-21 02:44:30 +00:00
28a6a57942
Use a task to perform the timeout abort so we have a process context when
...
sleeping.
2001-11-21 02:41:18 +00:00
5506bb0f06
Some more debug stuff.
2001-11-21 02:39:31 +00:00
2478d1b320
Cast some args to bitmask_snprintf().
2001-11-21 02:38:35 +00:00
f7fa67fcfc
Use round_page() instead of roundup(, PAGE_SIZE).
...
Suggested by chs@netbsd.org .
2001-11-21 01:30:04 +00:00
14c47b61f9
Fix possible typo in comment (s/MAXALLOCSIZE/MAXALLOCSAVE/).
2001-11-21 00:58:08 +00:00
6a043f1db9
Protect multi statement macro with do {} while (0). This is not cosmetic.
2001-11-21 00:55:39 +00:00
b171d0908b
Create a special kernel thread to run the usb short lived tasks (instead
...
of using the device discovery threads).
2001-11-20 23:53:26 +00:00
bcc50e9703
Use strncmp() when looking up volume files.
2001-11-20 23:09:45 +00:00
c8f26da0bd
- General code cleanup (and enable warnings).
...
- It's perfectly legal to have an 8 byte volume filename; the trailing
NUL is not required in this case.
- Default the partition type to "4.2BSD", not "EFS".
2001-11-20 23:07:16 +00:00
482b5bcec3
Removed unused (commented out) code
2001-11-20 21:50:13 +00:00
675946fd1c
Fixed the Linux signal trampoline and linux_sys_sigreturn(). Linux signal
...
delivery now seems fully functionnal.
2001-11-20 21:37:50 +00:00
52f4b0490c
Stylistic fix to last.
2001-11-20 21:21:03 +00:00
9716a5f26d
Don't bother with interrupts when being disconnected.
2001-11-20 21:12:46 +00:00
3f54e2c74f
Add stand to SUBDIR.
2001-11-20 18:37:00 +00:00
0f71151d6e
stand Makefile.
2001-11-20 18:36:31 +00:00
1e6da897d3
Michael Hitch's volume header tool.
2001-11-20 18:35:22 +00:00
5ecc88dc2f
Correct previous, pointed out by mhitch:
...
makebootdev() sets not booted_device but booted_protocol, so test for that.
2001-11-20 18:06:40 +00:00
f934d91c74
The 2nd SCSI controller is now supported; remove it from the TODO list.
2001-11-20 17:38:31 +00:00
a8de831b24
Support port indicator light.
2001-11-20 16:25:35 +00:00
6c04d91bae
Post Jason's autoconfig cleanup, the DMA tags are actually passed in from
...
the parent, so we don't need to look at the innards of bus_dma anymore.
Also, remove the Todo item pertaining to autoconfig cleanup from the list
in the comments.
2001-11-20 16:10:49 +00:00
2f560c9410
Sanity check max packet lengths.
2001-11-20 16:09:01 +00:00
c4596a56c0
Fix up Jason's last cleanup (thanks for that, btw!!)... Don't attach
...
hpc child devices that don't match our systype. Attempting to attach
a wdsc1 on my Challenge S locks the box hard.
2001-11-20 16:09:00 +00:00
7679101a11
Add a comment.
2001-11-20 16:08:37 +00:00
e5353fd3b5
Use longer reset for root hubs (as told in the spec).
2001-11-20 16:08:10 +00:00
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
8366f16a80
Don't wait for door bell interrupt when controller has been disconnected.
2001-11-20 14:28:44 +00:00
86e6ea35eb
Update for new speed handling.
2001-11-20 13:50:07 +00:00
a598bed92e
Simplify async list handling.
2001-11-20 13:49:23 +00:00
thorpej