33fe56f80f
Fix prototype for clear_cache (takes an address and length, not void).
1999-03-01 04:01:50 +00:00
62b98a9670
Make mkdep succeed (use matching quotes in comment).
1999-03-01 03:39:39 +00:00
f85c9832ac
- Fix cursor image validity check error in set_cursor().
1999-03-01 02:45:04 +00:00
d3a3d58726
Try not to run when kernel is in secure mode.
1999-03-01 01:05:51 +00:00
19221fa28e
A 5800 is a kn5800.
1999-03-01 00:18:13 +00:00
c8a301dac0
defopt AHC_SCBPAGING_ENABLE. Other ahc options are already defopt-ed.
1999-02-28 22:24:30 +00:00
5f9b5ac4f4
Garbage-collect pmax writebuffer drain when invalidating caches, pass 0:
...
Change `#ifdef pmax' to `#ifdef PMAX_CACHEFLUSH_FORCES_WBFLUSH'.
1999-02-28 21:53:00 +00:00
cb8e3b18a7
Change switch_exit() to use the *current* proc0 stack pointer, instead of
...
the *initial* stack pointer. The proc0 stack is being used by proc0 (i.e.
uvm_scheduler). This had been working because switch_exit() wasn't
overwriting any critical areas of the stack - unless kernel profiling
was turned on.
1999-02-28 20:36:31 +00:00
aade0aa230
sort SEE ALSO section by "sort |sort -n"
1999-02-28 20:15:50 +00:00
9d6a096335
sort SEE ALSO section by "sort | sort -n"
1999-02-28 20:13:41 +00:00
729bfc4dd7
undo commit made in error
1999-02-28 19:03:11 +00:00
c1ab1c57fb
don't collect or estimate on network devices by default
1999-02-28 19:01:30 +00:00
523f9ad292
Don't try to translate the mount point, to avoid e.g. mounting
...
the /usr filesystem on /emul/aout/usr.
1999-02-28 18:46:13 +00:00
8650b13a6c
add SHA1 man pages and include/sha1.h
1999-02-28 18:18:46 +00:00
e47e3c9f45
schedclk() -> schedclock(), for consistency with hardclock(), statclock(), ...
...
update comments for recent scheduler mods
1999-02-28 18:14:57 +00:00
91d6272def
flags and type are seperate now
1999-02-28 17:42:37 +00:00
6b24c4b0fd
Cleanup (in preparation for using gzip to estimate entropy)
...
(1) remove unused and probably bad (from an API POV) ioctls,
(2) split tyfl into type and flags,
(3) collect an array of samples, and add them all at once. Soon, this
will be using gzip to estimate the entropy, but for now the original
estimation methods are still used.
(4) kill rnd_add_data() -- it compliated the API for little benefit
1999-02-28 17:18:42 +00:00
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
5a1959a811
Push 'curproc' on the stack, not 'cachectl'. (I own Ignatios one brick :)
1999-02-28 16:49:04 +00:00
0d46b0d0fd
Make "1" an acceptable result in port tests.
...
This is a workaround for crappy hardware, normal keyboard controllers
return a "0".
Should fix PR port-i386/6636 by Krister Walfridsson and problems
reported by chopps and fvdl.
1999-02-28 14:26:38 +00:00
c0fb2ab4f2
Use a SETRECURSE lock before calling VFS_MOUNT in the mount() system call,
...
since the lock may be taken again. This was the intention of the CANRECURSE
lock already there, but didn't work.
Only fill in the vnode<->mountpoint links (mountedhere and vnodecovered)
after VFS_MOUNT returned succesfully. It might happen that something called
from VFS_MOUNT mistook the vnode for an already successfully mounted on
one because of this.
1999-02-28 14:12:54 +00:00
09469c565c
Define LK_SETRECURSE.
1999-02-28 14:09:45 +00:00
080ad305ff
Recursive locks were previously only available with LK_CANRECURSE. This
...
could be done in one of 2 ways:
* call lk_init with LK_CANRECURSE, resulting in a lock that
always can be used recursively.
* call lockmgr with LK_CANRECURSE, meaning that it's ok if this
lock is already held by us.
Sometimes we need a locking type that says: take this lock now, exclusively,
but while I am holding it, I may go through a code path which could attempt
to get the lock again, and which is unaware that the lock might already
be taken. Implement LK_SETRECURSE for this purpose. Assume that locks and
unlocks come in matching pairs (they should), and check for this 'level'
using SETRECURSE locks.
1999-02-28 14:09:15 +00:00
cff4c9630b
Don't mix in data just to stir the rnd pool. Extracting data will do that,
...
any network packets received might, too, so this is already taken care of.
1999-02-28 13:41:24 +00:00
f41d893cec
Because the old bound check is used at several places we need to make
...
sure that the array is really NULL terminated. Fixes PR bin/7062.
1999-02-28 11:46:26 +00:00
d57c7b76ca
replace ENTRY() label in data segment which broke the code completely
1999-02-28 11:45:44 +00:00
4bcb8b3a48
Correct precedence in calculation of storage for pollfds.
1999-02-28 11:30:18 +00:00
925f506372
- Don't use static array hack if neither "-p" nor "-P" are used.
...
- Because the logsocket array is not NULL terminated use the entry number
for bound checks.
1999-02-28 11:16:18 +00:00
c87ec3954b
Use correct expression "sizeof(char *)" instead of "sizeof(char **)"
...
to calculate memory size.
1999-02-28 11:03:35 +00:00
9929e72099
Fix some buglets pointed out by "Brett D. Slager" <bds@snarf.thnet.com>
1999-02-28 10:05:00 +00:00
3aca0028f1
Fix else ambiguity.
1999-02-28 10:01:08 +00:00
8b41c31868
Fix compiler warning.
1999-02-28 09:59:33 +00:00
04e9e604aa
Regenerate.
1999-02-28 07:45:13 +00:00
c3f462a037
Alas, Melody boards don't configure in a DraCo.
1999-02-28 07:42:47 +00:00
e640c5d7cc
Move all IPL setup to intr.c, and do some sanity checking.
1999-02-28 04:52:07 +00:00
b8ca758af8
Implement pmap_procwr() the arm32 part of fix for pr 6152.
1999-02-28 01:49:25 +00:00
cc6ca72465
Made this compile:
...
- fifth arg to recvtftp should be size_t (not ssize_t)
- the path is passed tftp_makereq as a part of the handle structure
1999-02-28 00:57:07 +00:00
89c4b1c360
Let's try to make prom_cnget() work.
1999-02-28 00:29:24 +00:00
b6bf56be36
Use block load/store in pmap_zero_page()/pmap_copy_page().
1999-02-28 00:26:46 +00:00
1f9186e111
Teach it some VIS instructions.
1999-02-28 00:23:58 +00:00
4ffa956fbb
Fix up alignment issues dumping physical memory.
1999-02-28 00:22:32 +00:00
548ab086f2
Urk, .Nx doesn't DTRT either.
1999-02-28 00:00:03 +00:00
a502b55bc2
Don't .Xr sha1(1) until we get such a thing, but do .Xr md5(1).
...
Also, don't .Ox (?) 2.0, but do .Nx 1.4.
1999-02-27 23:11:56 +00:00
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
2b90737599
Replace local xva_arg() inline function with macros similar to those in
...
the stdio vfprintf() function. Fixes compilation errors on powerpc due
to differences in how va_list is implemented.
1999-02-27 21:52:23 +00:00
b69760be08
Fix typo introduced in rev 1.11
1999-02-27 21:38:04 +00:00
7b36f54b99
Revert part of previous and use C/// instead of S/// for mipse[bl]->mips.
1999-02-27 21:21:26 +00:00
907d550100
This needs to use C///, not S///.
1999-02-27 21:13:50 +00:00
27fc050f1d
Oops.
...
Forgot to commit this LONG ago.
1999-02-27 20:46:56 +00:00
simonb