65806fd730
When converting from termios to sgtty, if RAW is set, use the previous\
...
settings of LITOUT and PASS8, since these cannot be determined from the\
termios modes.
1995-12-07 00:53:29 +00:00
480398f38e
dvma_malloc => malloc/dvma_mapin. (not the most elegant solution, but it'll
...
have to do for now).
1995-12-06 22:40:22 +00:00
f6a3272e25
DVMA space is described by the variables `dvma_start' and `dvma_end'.
...
Prototype dvma_map*() routines.
1995-12-06 22:35:54 +00:00
7299c7a6c0
Have v[un]mapbuf() allocate from plain kernel map instead of dvma space.
...
Remove dvma_malloc/dvma_free; drivers should allocate kernel memory and
use dvma_mapin/dvma_mapout to double map it in DVMA space.
Make the resource map `dvmamap' responsible for all DVMA allocation.
The VM map `physmap' only serves the role of placeholder in the VM system.
1995-12-06 22:33:49 +00:00
87206673fb
Keymap for the Swedish HIL keyboard, from Tomas Tengling <ltt@cd.chalmers.se>.
1995-12-06 22:13:23 +00:00
785c98a0cc
Oops.
1995-12-06 00:38:11 +00:00
210b4d80ec
Make pmap_prefer() also return a preferred virtual address when there's no
...
associated physical page.
1995-12-05 23:01:39 +00:00
801712f01a
Extend use of vm_object_prefer() to vm_allocate_with_pager().
...
Make vm_object_prefer() call MD aligner for "pageless" objects too,
so we can have more control over the virtual address to be used.
Implementation could be simpler if we by-pass the object to mapped, but
we'd loose the ability to adapt alignment to objects that were previously
mmap'ed with MAP_FIXED on.
1995-12-05 22:54:36 +00:00
9c784e07c1
Fix the integer overflow problem in pmap_init() when the user PT map is
...
allocated, as noticed by Chuck Cranor. In addition to re-arranging
the assignment as suggested by Niklas Hallqvist, check to see if maxproc
is higher than the number of available user PTs. If it is, lower maxproc
to that value, the rationale being that it's much more desirable to have
fork() return EAGAIN than to have your system wedge.
XXX note that root can still raise maxproc with sysctl(2) later. It's
probably worth having further discussion about this issue, but until
everyone has time to think about it, this seems like an acceptable solution
for the time being.
1995-12-05 20:01:54 +00:00
c94210debc
sync with termcap 9.11.5
1995-12-05 04:03:29 +00:00
0076a482bb
fix typo
1995-12-05 03:33:39 +00:00
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
955f6c4af4
Changed to unconditionally include <sys/types.h> as required by X/Open XPG4.2.
1995-12-05 03:09:19 +00:00
7439a63b22
Rename uuencode.format(5) to uuencode(5) as recommended by PR #1786
1995-12-05 03:02:31 +00:00
aa84d55d99
environmental -> environment
1995-12-05 02:55:55 +00:00
9a3ca97f12
ENVIRONMENTAL -> ENVIRONMENT
1995-12-05 02:41:35 +00:00
31f199d4e6
Added earlier forgotten MACHINE_ARCH, pointed out by Arne Henrik Juul.
...
Cleaned up a bit.
1995-12-04 22:32:53 +00:00
c6813ecb89
Didn't take care of errors when return parameter was long long.
...
Bug pointed out by Arne Henrik Juul.
1995-12-04 21:52:44 +00:00
fff3137419
this probably needs to be a syscall to work with our new core format, per pk
1995-12-04 09:57:13 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
f5d344126b
Have the ns32k architecure use gcc instead of gcc2.
1995-12-03 21:13:18 +00:00
fc587cf917
Something forgotten in the namespace changes.
1995-12-03 14:34:24 +00:00
70875fa68f
Return a more sensible errno when someone is trying to set the unsupported
...
mdmbuf option.
1995-12-03 14:32:39 +00:00
99e494a984
Fix from Niklas Hallqvist / Chuck Cranor / Michael Hitch / OpenBSD to avoid
...
integer overflow in initial pmap setup. Triggerred by high values for
maxusers.
1995-12-03 13:52:50 +00:00
52ec09e420
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
1995-12-02 18:21:49 +00:00
deb00c27b3
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to
the softc rather than a unit number.
Pointers to hardware and software constructs are now stored per port
in each instance of the softc (one softc per board) rather than indexed
by minor number.
1995-12-02 18:18:50 +00:00
41cf6f071f
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to the
softc rather than a unit number.
1995-12-02 18:15:50 +00:00
3ac76475ea
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting drivers prepared for new config.
1995-12-02 18:11:21 +00:00
de5ce5f48c
Change "hilloop" to "hilsoftc" and make slightly more new config-friendly.
...
Remove all uses of curproc.
1995-12-02 02:48:47 +00:00
b618522128
Make the DMA controller driver a little more new config-friendly. Still
...
more work to do, but this is a step in the right direction.
1995-12-02 02:46:45 +00:00
9b64dd253e
update trunk with recent change that fixes mount_ados mistake.
1995-12-01 21:09:54 +00:00
5f2ab2109f
Use files.fpe
1995-12-01 19:53:07 +00:00
ca1cc64e20
Remove forgotten #endif
1995-12-01 19:51:53 +00:00
45d824de05
DELUA/DENUA & DELQA/DEQNA Ethernet adapters converted to new config.
1995-12-01 19:37:55 +00:00
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
34527405c3
Import gcc-2.7.2. Since it is in the gcc directory instead of the gcc2
...
directory, this is being done now. We will live with two trees until
the "formal" switch over by changing src/gnu/usr.bin/Makefile.
1995-12-01 17:58:53 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
b488cc87de
Added World AIDS Day. Which is today.
...
12/01 World AIDS Day
1995-12-01 09:42:09 +00:00
3fbc1f7e9b
Enable flock(2).
1995-12-01 07:26:58 +00:00
8a1606d530
Don't return `XS_DRIVER_STUFFUP' too easily; this can hose buffer cache
...
writes. Say XS_TIMEOUT in stead so the scsi code will retry.
1995-12-01 01:00:55 +00:00
fe934606c7
NBPG may not be computable by the preprocessor. Make "do clustered io"
...
a run-time decision. Note: the compiler can optimize it away.
1995-12-01 00:47:33 +00:00
c9f22dd6ec
Undo bogus directory mode.
1995-11-30 23:57:58 +00:00
b760357314
Fix pasto.
1995-11-30 23:46:57 +00:00
e267646321
KNF-ify
1995-11-30 21:55:01 +00:00
291d8cbf3a
Add kernel option for separate {stat,prof}clock
1995-11-30 21:52:46 +00:00
10ebaa7036
Don't overwrite dirclust, it's needed later on
1995-11-30 19:00:57 +00:00
9dd5549e5d
Fix thinko with block boundaries in directories
1995-11-30 17:50:26 +00:00
c069674663
Handle PRU_CONTROL (David Maltz; PR#1664).
1995-11-30 16:42:18 +00:00
9c90327339
Make consistent with `make install' (from Arne Juul; PR#1665).
1995-11-30 16:34:26 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
mycroft