Commit Graph

521 Commits

Author SHA1 Message Date
msaitoh
5bf3b4ba22 regen 2000-11-02 07:16:16 +00:00
msaitoh
24429db457 add support:
MELCO		LPC2-TX
	Telecom Device	TCD-HPC100
	MACNICA		ME1-JEIDA
2000-11-02 07:15:43 +00:00
msaitoh
41cfcbebb0 Fix two bugs.
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.

- Check whether LIOBASE register is writable or not (dirty hack!).
  Fix PR. 11285
2000-11-02 07:04:46 +00:00
haya
a4df364077 METHOD CHANGE: Use CIS_FUNCE data which is decoded by pcmcia_cis.c,
instead of decode cis tuple by itself.  This change leads to suppress
one power-cycling.
2000-10-25 09:32:11 +00:00
haya
8130f0ec5d Add a cis decoding function which decodes some CISTPL_FUNCE tuples for
disk and network functions.
2000-10-17 10:13:46 +00:00
shin
6444136d42 cosmetic change. 2000-10-17 01:50:40 +00:00
itojun
d01f7f6e2b correct memory size to be mapped. PR 11242. 2000-10-16 10:26:41 +00:00
jonathan
6e67f82712 Fix wi_intr() to avoid touching card registers during insert/remove events,
when sharing an interrupt with other devices:
check sc->sc_enabled,  and drop the interrupt if its' off.

Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
2000-10-13 19:15:08 +00:00
enami
3a909c64a6 Use splnet instead of splimp in wi_ioctl. 2000-10-12 04:50:58 +00:00
enami
4c00a9d6aa Bail out initailzation on buffer allocation failure. 2000-10-12 03:29:59 +00:00
enami
b204f9e433 Use ether_ioctl. 2000-10-12 02:24:08 +00:00
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
enami
b4b2cdf575 Replace misused DIAGNOSTIC with WI_DEBUG. 2000-09-28 06:29:41 +00:00
enami
2f625bf43f Remove unnecessary and commented out code. 2000-09-28 06:24:48 +00:00
joda
00305bb997 provide some randomness 2000-08-28 13:25:22 +00:00
jhawk
ce7a425d77 Revert last, softc is now updated.
I neglected to checkin the if_wivar.h update earlier, sorry.
2000-08-26 00:08:43 +00:00
jhawk
a44862dea9 oops, missed this file earlier (Doh!):
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-26 00:05:54 +00:00
sommerfeld
3a2b5d49a6 partial backout of last commit: #if 0 references to sc->wi_mor_enabled
since it doesn't exist in the softc.
2000-08-25 03:11:14 +00:00
imp
9386fe0821 Sync to 1.98 of pcmciadevs 2000-08-24 07:12:20 +00:00
imp
cbacec4196 Sort BAY into numerical order. 2000-08-24 07:10:36 +00:00
jhawk
5056d0ce7c Add support for "microwave oven robustness" with wiconfig -M. 2000-08-23 19:01:04 +00:00
jhawk
8c3116e66a Copy wi_{dst,src}_addr from struct wi_frame into faked-up ether_header
instead of addr1 and addr2. THis means that tcpdump -e will show the
correct MAC address for communications with access points instead of showing
the BSSID.

In the future there should be 802.11 support for bpf/libpcap/tcpdump,
but that is aways down the road.

Also fix a typo in a comment.
2000-08-18 04:11:48 +00:00
jhawk
324576262d Fix typo in comment for WI_RID_AUTH_TYPE 2000-08-14 00:44:22 +00:00
ad
19fd9da968 Define SIOC[SG]IFGENERIC in <sys/sockio.h>, as FreeBSD and OpenBSD do. 2000-08-10 11:48:41 +00:00
gmcgarry
f21a75dee3 XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE 2000-07-31 21:49:47 +00:00
enami
35913a898c Sync internal state and ifmedia state. Addresses PR#10424. 2000-07-31 03:25:11 +00:00
briggs
e6dde2bd42 Add MII support to smc91cxx driver. This is supported for the 91c100
and 91c100FD (FEAST) controllers.  Existing controllers should continue
to work as they have.  Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
drochner
457d8d7c7e print parent device name too, so we know which socket a card was probed at
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
onoe
188122248a I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
with WEP enabled.
2000-07-26 07:28:56 +00:00
onoe
cc8e6675e2 add Samsung MagicLAN SWL-2000N 2000-07-26 07:24:15 +00:00
onoe
27d41a1de3 Map txrate for prism2, where each bit is apparently assigned to the
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
gmcgarry
5463f7b316 Improve the model identification and match. Addresses PR-10485. 2000-07-24 21:50:10 +00:00
gmcgarry
b023fdd2b7 Regen. 2000-07-24 21:47:40 +00:00
gmcgarry
0f37cacaf1 Add entries for all Xircom ethernet models. 2000-07-24 21:45:00 +00:00
onoe
afa5b645c2 add support for SIOCS80211NWKEY and SIOCG80211NWKEY. 2000-07-21 04:48:55 +00:00
abs
c9355a957c Add the pccard controller for a Toshiba Portege drive. No vendor ID, no
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
2000-07-20 23:20:01 +00:00
onoe
47f692248f add WEP support also for PRISM2 cards.
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
onoe
905b4e497f Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
onoe
4a2a3bf091 Add Farallon SkyLINE 11mb card as Intersil Prism2
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
	"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
jun
ceafcbd834 apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900

FIX:
  Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
itojun
e93c7e8dd2 typo. From: jdolecek 2000-07-05 18:47:51 +00:00
itojun
5f1c4bb519 use memory mapped address, instead of i/o memory access, for control
registers.  rationale:
- Netwave cards choke if we map i/o memory to >= 0x400
- even though, CIS tuple talks nothing about it
- it is not possible to specify range in pcmcia_io_map
- it would be very bad to do a try-and-error bus_space allocation for
  i/o memory regions < 0x400
- we can have exactly the same functionality with memory mapped access
this should correct PR 10139.

the memory mapped access idea was from WIDE wildboar/bsdi cnw code.
2000-07-05 18:42:19 +00:00
onoe
807a12c8cd change the argument of SIOCS80211NWID and SIOCG80211NWID ioctls from
u_int8_t array to struct ieee80211_nwid to prepend length field.
The length field is necessary because IEEE 802.11 spec doesn't prohibit
even '\0' for SSID.
Though the name and the value of SIOC... macro is unchanged, this change
breaks binary compatibility.  The only affected userland program on the
tree is ifconfig(8).
As Jason suggested on tech-net, it is better than live with problems
since there are no releases for this ioctls yet.
2000-07-05 02:35:53 +00:00
onoe
af32c63489 remove unneeded include "opt_awi.h" 2000-07-05 02:27:25 +00:00
onoe
793eb28211 Support WEP functions for awi driver.
arc4 implementation by Kalle Kaukonen has been added.
	define "wlan" in files.
		XXX: only awi depends on wlan for now.
	Allow authentication for adhoc (IBSS) mode.
Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio.
	FH cannot work without synchronization by beacons.
Align IP header for ethernet encapsulation (IFF_FLAG0) mode.
Print available access points for IFF_DEBUG.
2000-07-04 14:27:56 +00:00
joda
5f9b72f44c match 3Com 3CRWE737A (AirConnect) 2000-06-30 16:40:31 +00:00
joda
c8edea398b regen 2000-06-30 16:33:38 +00:00
joda
35c8e4d91e add 3Com 3CRWE737A (AirConnect) 2000-06-30 16:33:17 +00:00
mrg
261538ecac remove include of <vm/vm.h> 2000-06-28 16:39:25 +00:00
soren
d157be73ff Update from Onno: add media selection. 2000-06-14 22:54:37 +00:00