5b519fb0f9
Fill in framebuffer address for jornada720.
2001-03-21 14:05:10 +00:00
45480ac3bc
Move rules to create m68k and machine symlinks to common Makefile.inc.
2001-03-21 13:43:58 +00:00
577fa61b83
Enable interrupts before calling interrupt handler(s).
2001-03-21 11:38:39 +00:00
34e44075e0
- Remove "NOMAN= yes"
...
- Use "WARNS?= 1" rather than add warning options to COPTS.
2001-03-21 11:08:52 +00:00
650e6506dc
Remove "NOxxx= yes" lines since "MKxxx= no" is enough.
2001-03-21 11:02:24 +00:00
9ae0cb4d12
Make sure to create m68k and machine symlinks to include loadfile_machdep.h.
2001-03-21 10:58:54 +00:00
47e6a41505
only lock the kernel around sy_call if !SYCALL_MPSAFE
2001-03-21 09:01:16 +00:00
be5f917514
Add a small delay before reset at attach time, required by one old ATAPI
...
CD. Reported by Onno van der Linden.
2001-03-21 08:44:14 +00:00
93b8b31feb
set rmx_mtu to L2 interface mtu, instead of 0, on mtudisc timeout.
...
ip6_output() change is for safety. sync with kame
2001-03-21 07:52:13 +00:00
5947ce8284
make this compile without rnd.
2001-03-21 03:35:11 +00:00
11fe9ca446
use ubc_winshift instead of ubc_winsize in pmaps to set up kernel
...
virtual space. the latter isn't initialized yet when the value is needed.
fixes PR 12440.
2001-03-21 03:16:05 +00:00
af58b235e0
adapt to systems with out interrupt-map & interrupt-map-mask properties.
2001-03-21 01:33:47 +00:00
b11582be50
regen for trident cyberclade
2001-03-21 01:10:06 +00:00
d54969d21f
Add Trident CyberBlade as found in Toshiba Satellite Pro 4600
2001-03-21 01:09:36 +00:00
b54ea24924
Merge in4_cksum().
2001-03-21 00:38:47 +00:00
de59def2f2
Remove spurious #define mod_base.
2001-03-20 23:29:07 +00:00
998606396f
Move struct podule_list and struct podule_description to podulebus.h.
...
They're MI, even if only arm32 actually uses them at present.
2001-03-20 23:27:04 +00:00
86d6442c28
Move machine-dependent podulebus headers to <machine/podulebus_machdep.h>.
...
<dev/podulebus/podulebus.h> is the canonical file to include, and includes
<machine/podulebus_machdep.h>.
<arch/${MACHINE}/poudulebus/podulebus.h> remains for backward compatibility.
2001-03-20 22:59:39 +00:00
61e80eef9b
As Richard Earnshaw pointed out, bus_space_copy_1() and bus_space_copy_2()
...
had the wrong names and did the wrong things. Both are now fixed.
2001-03-20 22:56:16 +00:00
2ff439c85c
Add quirks for Panasonic MultiMediaCard adapter (attaches via USB).
2001-03-20 22:39:51 +00:00
93b623b541
Extend quirks to 32 bits. Add two new ATAPI quirks, one to
...
deal with a bad byte5 of the capacity descriptor, one to
handle devices that lack the flex geometry page.
2001-03-20 22:39:08 +00:00
7a3c8f81a5
Two changes, designed to make us even more resilient against TCP
...
ISS attacks (which we already fend off quite well).
1. First-cut implementation of RFC1948, Steve Bellovin's cryptographic
hash method of generating TCP ISS values. Note, this code is experimental
and disabled by default (experimental enough that I don't export the
variable via sysctl yet, either). There are a couple of issues I'd
like to discuss with Steve, so this code should only be used by people
who really know what they're doing.
2. Per a recent thread on Bugtraq, it's possible to determine a system's
uptime by snooping the RFC1323 TCP timestamp options sent by a host; in
4.4BSD, timestamps are created by incrementing the tcp_now variable
at 2 Hz; there's even a company out there that uses this to determine
web server uptime. According to Newsham's paper "The Problem With
Random Increments", while NetBSD's TCP ISS generation method is much
better than the "random increment" method used by FreeBSD and OpenBSD,
it is still theoretically possible to mount an attack against NetBSD's
method if the attacker knows how many times the tcp_iss_seq variable
has been incremented. By not leaking uptime information, we can make
that much harder to determine. So, we avoid the leak by giving each
TCP connection a timebase of 0.
2001-03-20 20:07:51 +00:00
df2b9ae2bd
Initial commit of wscons for the RiscPC/A7000 arm32 family. There is still lots
...
to do notably the mouse, some issues about 4 bpp modes and most of all Xwscons !
This code will still allow usage of the old vidcconsole complete with X etc.
Note that the wscons code can now only be booted with the new bootloader but
kernels compiled with vidcconsole can still be booted the old way.
2001-03-20 18:20:53 +00:00
1f21d8b280
hpcarm kernel is ELF.
2001-03-20 18:01:49 +00:00
66f705d045
Don't set up PDC2xx_SCR the same way for promise Ultra/66 & Ultra/100,
...
this special setup seems to break some adapters.
Reported by Kazushi Marukawa.
2001-03-20 17:56:46 +00:00
df43ec1064
Add BUS_DMA_STREAMING for the data bus_dmamap_load().
2001-03-20 17:54:39 +00:00
b4095cd8bf
support HITACHI PERSONA configuration.
2001-03-20 16:05:42 +00:00
889e6d332a
initialize TMU
2001-03-20 16:04:01 +00:00
39081f8af1
make HD64461 UART module usable on HITACHI PERSONA
2001-03-20 16:03:28 +00:00
dc7eafe744
Redo previous. Instead of defining another type, mask upper bits of pvr.
2001-03-20 15:52:07 +00:00
d7858fb571
Add RiscPC (arm32) keyboard. It basicly returns AT scancodes but since it has to
...
use a seperate keyboard driver (pckbdc not available) i cant guarantee that it is
100% compatible with AT scan codes
2001-03-20 15:51:18 +00:00
4cefebdf8d
Fix fall-out from previous change: the map's DMA address is valid only
...
after bus_dmamap_load().
2001-03-20 15:39:20 +00:00
482f11868a
Added dependency for "VIDCCONSOLE" (old console code) for the physcon char
...
device on console (makedev(4,0)) to aid in wscons transition.
2001-03-20 15:39:16 +00:00
056ea0d17a
+#include <dev/i2o/iopio.h>
2001-03-20 13:21:00 +00:00
ef80e73a4e
Split limits and ioctl defs out of iopvar.h.
2001-03-20 13:02:25 +00:00
ebf5110997
Major update; basically, improve performance somewhat and play nicer with
...
Intel and AMI IOPs. There still exists one nasty problem with Intel adapters
when under load, which I'm working on.
2001-03-20 13:01:48 +00:00
adbed15428
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:52:03 +00:00
e8f67fd5b7
`bitsperpixel' in the bootconfig structure is replaced by `log2_bpp'
...
for thats the value that is in it anyway and not the number of bits per pixel !
This to avoid confusion.
2001-03-20 12:50:08 +00:00
2ac5b2f7cf
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:48:37 +00:00
96184e84cf
Add a diagnostic when we encounter an unknown boot device type.
2001-03-20 05:51:35 +00:00
7fec679447
sync to GENERIC 1.400
2001-03-20 05:49:32 +00:00
4ed1ad8e29
A generic implementation of the Fowler/Noll/Vo hash (FNV hash),
...
as described at:
http://www.isthe.com/chongo/tech/comp/fnv/
This was implemented for FreeBSD by Peter Wemm.
2001-03-20 02:10:18 +00:00
b10a79d548
regen
2001-03-20 00:41:19 +00:00
f921de978d
add sun device ids found on sunblade1000 systems.
2001-03-20 00:39:12 +00:00
b4d35ec9a7
ei(4) is now MI, in a limited sense at least.
2001-03-20 00:15:26 +00:00
0fe2c0aedc
These have moved to sys/dev/podulebus.
2001-03-20 00:13:16 +00:00
2c4e09f4c9
Revert last change, which shouldn't have applied to this file.
2001-03-20 00:04:28 +00:00
23836945a3
Redefine bus_space_addr_t to be a raw address, for compatibility with arm32
...
podulebus drivers.
2001-03-20 00:03:10 +00:00
34cca2e23e
Pull in shared podulebus drivers.
2001-03-20 00:01:37 +00:00
90567f2deb
Quick hack to pull in podulebus.h for the current architecture.
...
This should be done better (probably with <machine/podulebus_machdep.h> later.
2001-03-19 23:59:33 +00:00
toshii