Commit Graph

29 Commits

Author SHA1 Message Date
dyoung 71e77a61b4 Constify: LLADDR -> CLLADDR. I'm aiming here to make it easier to
identify sockaddr_dl abuse that remains in the kernel, especially
the potential for overwriting memory past the end of a sockaddr_dl
with, e.g., memcpy(LLADDR(), ...).
2007-08-26 22:45:55 +00:00
ad 88ab7da936 Merge some of the less invasive changes from the vmlocking branch:
- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements
2007-07-09 20:51:58 +00:00
christos 53524e44ef Kill caddr_t; there will be some MI fallout, but it will be fixed shortly. 2007-03-04 05:59:00 +00:00
mlelstv f192518511 Make watchdog poll interrupts before re-initializing the chip.
Fixes kern/34834.
2007-01-07 12:57:20 +00:00
christos 168cd830d2 __unused removal on arguments; approved by core. 2006-11-16 01:32:37 +00:00
christos 4d595fd7b1 - sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386
2006-10-12 01:30:41 +00:00
christos 63bbcb495a re-factor the pci powestate api. reviewed by gimpy 2006-06-17 23:34:26 +00:00
christos 95e1ffb156 merge ktrace-lwp. 2005-12-11 12:16:03 +00:00
perry f31bd063e9 nuke trailing whitespace 2005-02-27 00:26:58 +00:00
thorpej e9818f5b5e When adding/deleting multicast addresses, only whack the address
filter if the interface is marked RUNNING.

Fixes kern/27678.
2004-10-30 18:08:34 +00:00
thorpej d17a849385 Use ANSI function decls and make use of static. 2004-08-21 22:48:18 +00:00
mycroft a127f24934 Program the "MaxFrameSize" register so that it's correct for VLAN
encapsulation, per PR 20195.
2004-07-08 18:27:14 +00:00
tsutsui 18e6b982e3 Add a missed htole32() for DMA txdescs.
Problem reported by Todd Mortimer on port-macppc.
2003-06-05 16:33:43 +00:00
tsutsui 238efe4697 Replace magic numbers for power management control with PCI_PMCSR* macros.
XXX Should we use pci_get_powerstate() and pci_set_powerstate() in pci.c?
2002-12-23 02:58:36 +00:00
fair 2104199dc3 Change the "dontcare bits" argument to ifmedia_init() to IFM_IMASK
so that it is possible select PHY instances other than the first
one (instance zero), if there is more than one PHY attached.
2002-10-21 23:38:10 +00:00
thorpej b75a007d9f Add trailing ; to CFATTACH_DECL. 2002-10-02 16:51:16 +00:00
thorpej 387fc6dc87 Use CFATTACH_DECL(). 2002-09-30 20:37:04 +00:00
thorpej f818766afe Declare all cfattach structures const. 2002-09-27 20:31:45 +00:00
bouyer 10f940facc STE_CarrierSenseErrors is 8bit wide, not 16bit.
Reenable statistics interrupts, reading it as 16bit caused it to not be cleared,and thus the eventual interrupt to not be cleared (and this caused an
infinite loop in interrupt routine).
While I'm there count STE_CarrierSenseErrors as oerror (this is incremented
each time we try to send a packet and the link is down).
2002-06-05 16:27:29 +00:00
bouyer aad58d87e1 Rework transmit underrun logic:
- when a transmit underrun occurs, only reset the transmit logic. This prevents
  the link from going down at the MII level (the same logic can probably
  be used for other transmit errors)
- set the urgent threshold to half the start threshold. From experiments
  this helps a bit decreasing the number of underruns

Now that underruns don't cause the interface to stop for several seconds,
make back out the default transmit threshold to 128.
2002-06-05 15:24:31 +00:00
bouyer dc66b51bca When the chip gets a transmit underrun, the driver resets the chip, which
cause the link to go down for several seconds on my Dlink DFE580-TX (quad-port
DL1002). This behavior is unacceptable, especially as the driver usually
gets several underrun at once, causing the link to be almost unaviable
for several 10s of seconds.
Bump the default transmit threshold to 1504 bytes to avoid transmit underrun.
2002-06-01 17:24:38 +00:00
bouyer 208589bfca On a Dlink DFE580-TX (DL-1002), attempting to transmit packets while the link
is down cause the chip to create an IE_UpdateStats condition which can't be
cleared, causing the driver to enter an interrupt loop.
Workaround: mask IE_UpdateStats
2002-06-01 17:20:13 +00:00
lukem 9048aaae21 add RCSID 2001-11-13 07:48:40 +00:00
thorpej bd35a1b7ed Make sure to initialize the all Rx descriptors properly in *_init()
even if mbufs for them are already allocated.
2001-07-23 17:26:50 +00:00
thorpej 536f4fded2 Adjust some reset delays. 2001-07-23 17:23:09 +00:00
thorpej 44e529fecc Use BUS_DMA_READ and BUS_DMA_WRITE in some obvious places. 2001-07-19 16:36:14 +00:00
thorpej 2642760b40 Update for D-Link ST201 change. 2001-06-30 01:05:25 +00:00
thorpej abda6184c0 In the `copy small' path, make sure to align the payload. 2001-06-29 23:36:03 +00:00
thorpej 7e843c3ccb Device driver for the Sundance Tech. ST-201 10/100 Ethernet. This
chip is found on the D-Link DFE-550TX.
2001-06-19 23:00:47 +00:00