exec case, as the emulation already has the ability to intercept that
with the e_proc_exec hook. It is the responsability of the emulation to
take appropriaye action about lwp_emuldata in e_proc_exec.
Patch reviewed by Christos.
so that a specific emulation has the oportunity to filter out some signals.
if sigfilter returns 0, then no signal is sent by kpsignal2().
There is another place where signals can be generated: trapsignal. Since this
function is already an emulation hook, no call to the sigfilter hook was
introduced in trapsignal.
This is needed to emulate the softsignal feature in COMPAT_DARWIN (signals
sent as Mach exception messages)
and make the stack and heap non-executable by default. the changes
fall into two basic catagories:
- pmap and trap-handler changes. these are all MD:
= alpha: we already track per-page execute permission with the (software)
PG_EXEC bit, so just have the trap handler pay attention to it.
= i386: use a new GDT segment for %cs for processes that have no
executable mappings above a certain threshold (currently the
bottom of the stack). track per-page execute permission with
the last unused PTE bit.
= powerpc/ibm4xx: just use the hardware exec bit.
= powerpc/oea: we already track per-page exec bits, but the hardware only
implements non-exec mappings at the segment level. so track the
number of executable mappings in each segment and turn on the no-exec
segment bit iff the count is 0. adjust the trap handler to deal.
= sparc (sun4m): fix our use of the hardware protection bits.
fix the trap handler to recognize text faults.
= sparc64: split the existing unified TSB into data and instruction TSBs,
and only load TTEs into the appropriate TSB(s) for the permissions.
fix the trap handler to check for execute permission.
= not yet implemented: amd64, hppa, sh5
- changes in all the emulations that put a signal trampoline on the stack.
instead, we now put the trampoline into a uvm_aobj and map that into
the process separately.
originally from openbsd, adapted for netbsd by me.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
it checks both the alternative/emul tree, and the non-emul tree.
This makes it possible to run chrooted emulated binaries without need
to setup shadow /emul tree within the chroot hierarchy.
XXX sligh code rearrangement was necessary, change not tested
memory fault handler. IRIX uses irix_vm_fault, and all other emulation
use NULL, which means to use uvm_fault.
- While we are there, explicitely set to NULL the uninitialized fields in
struct emul: e_fault and e_sysctl on most ports
- e_fault is used by the trap handler, for now only on mips. In order to avoid
intrusive modifications in UVM, the function pointed by e_fault does not
has exactly the same protoype as uvm_fault:
int uvm_fault __P((struct vm_map *, vaddr_t, vm_fault_t, vm_prot_t));
int e_fault __P((struct proc *, vaddr_t, vm_fault_t, vm_prot_t));
- In IRIX share groups, all the VM space is shared, except one page.
This bounds us to have different VM spaces and synchronize modifications
to the VM space accross share group members. We need an IRIX specific hook
to the page fault handler in order to propagate VM space modifications
caused by page faults.
format specific.
Struct emul has a e_setregs hook back, which points to emulation-specific
setregs function. es_setregs of struct execsw now only points to
optional executable-specific setup function (this is only used for
ECOFF).
From the NetBSD and OSF man pages, the arguments and operation of the
2 flocks are identical. The only differences are in some of the possible
values for errno which may be set in the event of certain errors. These
differences are (again from the manual pages):
The NetBSD flock may set errno to
[EOPNOTSUPP] The argument fd refers to an object other than a file.
and the OSF flock doesn't list this is a possible error code.
The OSF flock may set errno to:
[EINTR] A signal interuppted the flock call.
[ENOLCK] The lock table is full. Too many regions are already locked.
[EDEADLK] The lock is blocked by some lock from another process. Putting
the calling process to sleep while waiting for that lock to
become free would cause a deadlock.
while the NetBSD flock does not list these as possibilities.
The remainder of the possible error codes are the same.
commit cleared with thorpej first.
Async I/O OS specifities should now handled in OS specific code. Linux
has been done, but other emulation should be handled. See case LINUX_F_SETFL
in sys/compat/linux/common/linux_file.c:linux_sys_fcntl() for more details.
The data that has been collected yet:
Net Free Open Linux SunOS AIX OSF1 Darwin
send SIGIO to write end of pipe Y N N N N N Y Y
send SIGIO to read end of pipe Y Y N N N ? Y ?
send SIGIO to write end of socket Y Y Y N N Y Y Y
send SIGIO to read end of socket Y Y Y Y Y ? Y ?
between creation of a file descriptor and close(2) when using kernel
assisted threads. What we do is stick descriptors in the table, but
mark them as "larval". This causes essentially everything to treat
it as a non-existent descriptor, except for fdalloc(), which sees a
filled slot so that it won't (incorrectly) allocate it again. When
a descriptor is fully constructed, the code that has constructed it
marks it as "mature" (which actually clears the "larval" flag), and
things continue to work as normal.
While here, gather all the code that gets a descriptor from the table
into a fd_getfile() function, and call it, rather than having the
same (sometimes incorrect) code copied all over the place.
EMUL_BSD_ASYNCIO_PIPE notes that the emulated binaries expect the original
BSD pipe behavior for asynchronous I/O, which is to fire SIGIO on read() and
write(). OSes without this flag do not expect any SIGIO to be fired on
read() and write() for pipes, even when async I/O was requested. As far as
we know, the OSes that need EMUL_BSD_ASYNCIO_PIPE are NetBSD, OSF/1 and
Darwin.
EMUL_NO_SIGIO_ON_READ notes that the emulated binaries that requested
asynchrnous I/O expect the reader process to be notified by a SIGIO, but
not the writer process. OSes without this flag expect the reader and the
writer to be notified when some data has arrived or when some data have been
read. As far as we know, the OSes that need EMUL_NO_SIGIO_ON_READ are Linux
and SunOS.
callers and appropriate routines to cope. This makes fo_stat more
consistent with rest of fileops routines and also makes the fo_stat
match FreeBSD as an added bonus.
Discussed with Luke Mewburn on tech-kern@.
now obsolete, so that kernels will at least compile. I guess it was too
much trouble to change all 10 call sites, or perhaps, these days, only
things that build on i386 are important. Maybe it's the full moon tonight.
* __HAVE_SYSCALL_INTERN. If this is defined, e_syscall is replaced by
e_syscall_intern, which is called at key places in the kernel. This can be
used to set a MD syscall handler pointer. This obsoletes and replaces the
*_HAS_SEPARATED_SYSCALL flags.
* __HAVE_MINIMAL_EMUL. If this is defined, certain (deprecated) elements in
struct emul are omitted.
*_emul_path variables
change macros CHECK_ALT_{CREAT|EXIST} to use that, 'root' doesn't need
to be passed explicitly any more and *_CHECK_ALT_{CREAT|EXIST} are removed
change explicit emul_find() calls in probe functions to get the emulation
path from the checked exec switch entry's emulation
remove no longer needed header files
add e_flags and e_syscall to struct emul; these are unsed and empty for now
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
incomplete at the moment (notable the fp_control stuff) but they need to
exist for the linux compatibilty code. All other osf1 syscalls needed for
linux compat are already here.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
macro was lost. For lack of the macro, the function was lost. For lack
of the function, the syscall was lost. For lack of the syscall, the
application was lost. For lack of the application, my time was lost.
count is 0, wait for use count to drain before finishing the close.
This is necessary in order for multiple processes to safely share file
descriptor tables.
fvdl