52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
963921febe
regen
1999-07-20 20:59:03 +00:00
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
bouyer