slightly, but autoinitialize mode is impossible to use reliably, since it
means that if disc interrupts are blocked for long enough (or sec_copyout
is too slow), the uPD71071 can run off the end of a block before the
base registers have been updated and end up processing the same block
twice. With this change, the SEC in my A540 seems finally to be solid.
driver uses the board's DMA system, uses the machine-independent WD33C93
driver, works on NetBSD/acorn26, and doesn't share a name with six other
machine-dependent SCSI drivers. Not tested on acorn32, but it seems to
work tolerably well on my A540.
This allows us to convert aucom to just another com attachment, and cleanup
some code in the com_arbus.c.
Additionally, we use a common com_cleanup routine rather than having a
zillion copies of it in the attachment points.
This has been tested on a number architectures, and it has been shown to get
close to comparable performance when COM_REGMAP is defined, and comparable
when it is not defined.
Approved by core@. Fixes PR port-evbmips/32362.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
-convert submatch() style functions (passed to config_search() or
config_found_sm()) to the locator passing variants
-pass interface attributes in some cases
-make submatch() functions look uniformly as far as possible
-avoid macros which just hide cfdata members, and reduce dependencies
on "locators.h"
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
cegger