kleink
cdcf9f46c5
Add definitions of C99 integer constant macros.
...
Tidy Makefiles up a little.
2001-04-14 22:46:19 +00:00
kleink
a7c20e5788
Add definitions of C99 integer constant macros.
2001-04-14 22:38:33 +00:00
kleink
7affdab52e
Add definitions of C99 minimum-width and greatest-width integer types.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-14 12:19:49 +00:00
thorpej
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
itojun
fbc07662f5
$NetBSD$ tag cleanup
2001-04-13 08:11:44 +00:00
itojun
eb0cfc6af5
s/$Id$/$NetBSD$/
2001-04-13 08:09:07 +00:00
thorpej
316dcc474b
splvec.splimp -> splvec.splvm
2001-04-12 19:21:20 +00:00
sato
5dd91b669c
add VR4101 specific BCU registers.
...
add VR4122 specific BCU registers.
add cpu specific comments.
2001-04-11 08:52:59 +00:00
sato
68d21310de
opt_vr41x1.h -> opt_vr41xx.h.
...
add 'options VR41XX' and kill 'options VR41X1'.
add 'options VR4101' (not yet supported)
add 'options VR4102'
add 'options VR4111'
add 'options VR4121'
add 'options VR4122' (not yet supported)
add 'options VR4181' (not yet supported)
these are for config level size optimization.
currenty, no optimization codes are exist.
NOTE: there are some incompatibility in VR4181 & VR4101 &
VR4102,4111,4121 group & VR4122.
GENERIC (for VR41XX series) has options VR4102, VR4111, VR4121.
2001-04-11 08:23:26 +00:00
wiz
14dbdf5518
Negative exit code cleanup: Replace exit(-x) with exit(x).
...
As seen on tech-userlevel.
2001-04-06 11:13:45 +00:00
sato
6601895830
add vrc4172pwm for MC-R510, MC-R520.
2001-04-03 09:02:24 +00:00
uch
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
sato
6c5da9bd76
o Change initialization for config_hook() base lcd control.
...
o Fix backlight control in case that light is controlable but not be
able to get status.
o change some verbose prints.
2001-03-26 09:40:45 +00:00
sato
887d70ab8f
CONFIG_HOOK_GET support for get current port status.
2001-03-26 08:57:02 +00:00
uch
ed26af9e66
recognize hpcboot.exe's ELF symbol table.
2001-03-25 15:15:18 +00:00
takemura
44e4c53338
Add MQ200_USECRT option, which enables CRT output on MC/R530.
...
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.
2001-03-25 13:06:52 +00:00
sato
c5956b89f8
change backlihght parameter value type to int8_t.
2001-03-24 16:08:36 +00:00
sato
8c78f7fad3
add vrc4172pwm for MC/R520A(MobilePro770)
2001-03-24 15:56:59 +00:00
sato
1907b28be1
add MobilePro770(MC/R520A) parameters.
2001-03-24 15:53:37 +00:00
sato
8f5f11180a
o add sysctl machdep.booted_kernel support.
...
o add sysctl machdep.root_devoce support.
2001-03-23 11:09:49 +00:00
lukem
723cd818d8
move duplicate definitions for:
...
pc, lpt, joy, ocis, apm, satlink, i4bctl, i4brbch, i4btel, i4btrc, i4b
from the port-specific arch/*/*/conf.c files into sys/conf.h
2001-03-21 22:25:52 +00:00
soren
912c115675
s/vm_page_alloc_memory/uvm_pglistalloc/ in panic message.
2001-03-21 18:40:28 +00:00
chs
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
sato
ae8397d1f8
comment out:options WSDISPLAY_DEFAULTSCREENS=4
2001-03-13 03:44:23 +00:00
sato
ee1d25e7bd
* assume backlight is on if backlight value cannot get.
...
* move the lcd control codes used config_hook_call()
in *_hardpower() to *_power().
2001-03-12 08:54:25 +00:00
sato
859d83dd22
* vrc4172pwm_get_light() return the value masked by VRC2_PWM_LCDEN_MASK.
...
* when resume from suepend, restore saved value instead of always on.
2001-03-12 08:46:27 +00:00
uch
cb1bebe07e
remove unneeded include.
2001-03-11 16:45:13 +00:00
takemura
1ab9404c3c
Fix definition of MQ200_GCR(n). This definition was quite bad!
2001-03-11 13:53:31 +00:00
takemura
5cb5569c63
Apply 'CF hack' to all model of Cassiopeia E series.
2001-03-11 05:18:51 +00:00
sato
80214041c7
support WSDISPLAYIO_SVIDEO/WSDISPLAYIO_GVIDEO.
...
lcd on/off
2001-03-09 08:54:18 +00:00
thorpej
2c4c690f14
Add the BUS_DMA_STREAMING flag.
2001-03-07 22:42:16 +00:00
sato
1a533a81d6
add sigmarion parameter.
2001-03-06 03:14:39 +00:00
takemura
c074920294
Add PocketPostPet entry.
...
The version number is 1.17.2 2001.03.04.
2001-03-04 05:38:19 +00:00
takemura
0cb5085286
BUGFIX: These string data, 'MEMORI- KA-DO...' didn't have any terminater.
2001-03-04 05:11:31 +00:00
takemura
e18e70f67e
Add some diagnostic code.
2001-03-04 05:08:29 +00:00
sato
f199529e4b
add MC/R430(copy of MC/R530)
2001-03-02 09:14:36 +00:00
sato
b8e5bc569c
* add WSDISPLAYIO_PARAM_BACKLIGHT, WSDISPLAYIO_PARAM_CONTRAST,
...
WSDISPLAYIO_PARAM_BRIGHTNESS supports.
2001-02-27 08:54:17 +00:00
sato
269197a956
add vrc4172pwm for MC/R530A, MC-R700.
2001-02-27 08:51:06 +00:00
sato
66261e817a
* update copyright year.
...
* some machines(MC-R700 etc) have pre-vrc4172 asic.
they don's work as vrc4172 specification, so skip some probe sequence.
- add platid related parameter.
- add VRC4172PWM_BROKEN_PROBE code.
* add MC-R700,700A parameters (tested on MC-R700).
* add contrast parameters.(but no one use yet).
* turn some message in probing to VPRINTF().
* enlarge VRC2_PWM_N_BRIGHTNESS.
2001-02-27 08:48:38 +00:00
sato
42127a3ffd
register vrc4172pwm driver for MC/R530 etc..
2001-02-26 09:34:22 +00:00
sato
fb03c1ad33
DPRINTF/VPRINTF change.
2001-02-26 09:33:03 +00:00
takemura
074b36937c
Make it compilable, syncing with the relocation of the platid stuff.
2001-02-25 12:58:36 +00:00
uch
b81de58f77
I forgot to move Makefile.
2001-02-23 14:08:54 +00:00
uch
659f65e0ee
hpc common files are moved to dev/hpc.
2001-02-22 18:37:54 +00:00
uch
8b060aaf64
hpc* common disksubr.c
2001-02-21 16:34:00 +00:00
sato
ed219529f5
* vrc4172pwm_light(): workaround when brightness is max.
...
if light turn off, brightness must be minimum.
* more DPRINTF().
2001-02-16 12:31:46 +00:00
sato
6602ad15b5
* show framebuffer address in boot time.
2001-02-15 09:17:18 +00:00
sato
bcece69eb6
* add MC/R430/530/530A parameters in vrc4172pwm_platid_param_table.
...
* fix typo in cf_loc access.
* add some DPRINTF()s.
* fix default value if no params in vrc4172pwm_platid_param_table.
2001-02-15 03:20:10 +00:00
uch
f19685fa10
I forgot to initialize bicons for hpcmips.
2001-02-09 20:42:27 +00:00
uch
68b5de4251
sync with bicons change.
2001-02-09 19:47:28 +00:00