the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
Rumors say there are archs without ISA busses, so avoid including
(uneccesarily) isa bus headers in MI files.
XXX this is the minimal solution, layer interface calls will have
XXX to be revisited later
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
fvdl