thorpej
732dd94a83
Add experimental data mirroring support, derived from code written by
...
Satoshi Asami and Nisha Talagala. For details on using data mirroring,
see the ccd(4) manual page.
1996-02-01 20:47:13 +00:00
jonathan
c72cd6e76c
Set sc->sc_cookie appropriately for the ioasic and TC option cases.
...
Tested on Decstation: ioasic, kn02 baseboard, and TC option card.
Add untested for pmax 3100/5100 baseboard ethernet.
1996-02-01 06:12:16 +00:00
briggs
e5ece749b2
Handle COMMAND ABORTED by forcing a retry. PR#2003, but with some more
...
diagnostic info.
1996-01-31 15:16:06 +00:00
cgd
40628fb3e8
update for new version of 'pcidevs'
1996-01-31 00:45:25 +00:00
cgd
8a3babe178
update/clean entries for Adaptec PCI scsi chips/boards.
1996-01-31 00:43:02 +00:00
gwr
f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
thorpej
919f6728ab
Accept DIOCEJECT as a synonym for CDIOCEJECT. Implement DIOCLOCK
...
separately from CDIOCALLOW and CDIOCPREVENT, even though they perform
basically the same function (with a different interface XXX).
1996-01-30 18:28:02 +00:00
thorpej
c7a20f0ee3
Implement DIOCLOCK and DIOCEJECT. DIOCEJECT is limited to removable
...
media. Fixes PR #1975 .
1996-01-30 18:24:47 +00:00
gwr
c2c1c1b11a
Move struct definitions to MD code.
1996-01-24 19:21:40 +00:00
gwr
a3c19fb08a
Oops, I didn't mean to check in that file.
1996-01-24 16:03:31 +00:00
gwr
c68a32fc95
New "child" drivers for Sun keyboard and mouse attached to z8530sc.
1996-01-24 01:15:34 +00:00
gwr
ca633a9f35
Reorganized, machine-independent z8530 driver, based on the sparc/sun3 zs.
...
Uses autoconfig to attach keyboard, mouse, or tty. (See z8530.doc)
1996-01-24 01:07:21 +00:00
gwr
5886eb474f
Use the function pointers sc_pio_in, sc_pio_out to call the PIO functions
...
for transfers in data phase so those functions may be MD implementations
that do "pseudo-DMA" if desired. Also correct some comments.
1996-01-23 19:47:00 +00:00
cgd
0d743e5a05
update PCIVERBOSE code in various ways:
...
(1) remove the 'UNSUPP' keyword from the device list,
because it can't be reasonably used (becuase different
devices may be supported on different machines, for
good reason).
(2) enhance pci_devinfo so that class/subclass information
is optional (so pci_devinfo can be used by drivers that
match classes of devices, and want to look up the
devices' names easily).
(3) more known vendors and devices.
1996-01-22 21:08:09 +00:00
mycroft
02317d25bb
Make the panic message for ISA clone devices more informative.
1996-01-16 07:52:38 +00:00
christos
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
thorpej
f08d96426e
Oops. Fix RCS id.
1996-01-13 02:06:30 +00:00
thorpej
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
thorpej
8068d9eeb2
Handle cases like the following:
...
- controller calls scsi_done() with error XS_TIMEOUT
- scsi_done() calls sddone()
- sddone() calls disk_unbusy()
- scsi_done() calls controller to retry command (missing the
call to disk_busy())
- controller calls scsi_done()
- scsi_done() calls sddone()
- sddone() calls disk_busy(), which panics because of the imbalance.
Bug noticed by Leo Weppleman, who also suggested this fix; pass an additional
boolean argument ("complete") to the device's "done" routine, with a
value of `0' passed from the previous call to "done", and add an additional
call to "done" when the xfer resources are freed.
1996-01-12 22:43:26 +00:00
pk
59dd89e3b1
LUN deficient device: Tandberg 3600 (Ken Raeburn; PR#1933).
1996-01-12 11:32:37 +00:00
thorpej
48bb61e0d7
Use WTDBPRINT() instead of DEBUG() for driver debugging printf()s..
...
Fixes PR #1927 , from Erik Bertelsen <erik@arhpc214.uni-c.dk>
1996-01-12 00:54:23 +00:00
thorpej
5b51ec5cc8
Honor cache request and implement erase command, and add the SCSI tape
...
device configuration page. Fixes PRs 807, 1201, and 1705.
From John Kohl <jtk@kolvir.blrc.ma.us>.
1996-01-11 03:36:34 +00:00
hpeyerl
5e81dcd27a
Make it a tad more obvious that this is a 3c505 driver.
1996-01-10 18:21:52 +00:00
chuck
75caa8c729
Imported from OpenBSD/FreeBSD:
...
Add support for the SMC8416 (EtherEZ) ISA ethernet card.
The 8416 has an 8K shared mem (the old driver assumed 16K
and failed at attach time).
1996-01-10 16:49:22 +00:00
mycroft
3441f118d5
Make sure we disk_busy() for every transfer we start.
1996-01-08 21:21:56 +00:00
thorpej
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
mycroft
0b6a86dfe5
Make the block size always a whole number of samples.
1996-01-07 06:21:02 +00:00
pk
0548b8e5ad
SCSI sense `info' field is a signed value (from John Kohl; PR#1597).
1996-01-05 16:03:35 +00:00
pk
de0584fa25
Avoid zero blocksize (from David Huang; PR#1770).
1996-01-05 13:16:30 +00:00
jonathan
3b6b27f9d5
Commit trivial changes from Mach MK84 to force sup'ables source to be updated:
...
Drop spurious interrupts in asc_intr(). Read back the pending SCSI command
so asc_intr() can add it to the asc SCSI log.
1996-01-04 17:43:23 +00:00
thorpej
efb493a4e0
Back out the rint/tint hook stuff, and remove need to LEINTR_UNIT. The
...
hp300 was the last to use it.
1996-01-02 21:51:56 +00:00
thorpej
1bd3fee124
Switch to David Jones' new machine-independent NCR5380 driver. It's been
...
in use by the sun3 port for some time, and is now used by the sparc port.
1996-01-01 22:24:30 +00:00
thorpej
19c3f6d999
Add another broken CD-ROM drive to The List (Chinon CDS-525), per PR #1686 .
...
From Kortelainen Mika <k125374@cs.tut.fi>.
1995-12-31 02:40:53 +00:00
thorpej
0df0df026b
Add hooks at the top of the tint and rint functions, conditionally called
...
if the CPP symbols LE_TINT_HOOK and LE_RINT_HOOK are defined, respectively.
The hooks are called by jumping though the sc_tint_hook and sc_rint_hook
members of the softc, and take the softc as an argument. Only ports which
need these hooks need to declare them in the softc.
1995-12-30 20:59:17 +00:00
thorpej
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
thorpej
3ee815f0ce
Squish a couple of rogue old-style RCS ids.
1995-12-28 08:58:15 +00:00
chopps
fd9084650c
make changed from pr#1824 from Ignatios Souvatzis
1995-12-27 07:51:40 +00:00
mycroft
b9c37470a0
Fix Ultrastor 24f probe, per Andrew Gillham.
1995-12-26 17:16:55 +00:00
mycroft
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
tls
69d57286dc
merge latest Thomas version with our minimal changes
1995-12-23 06:22:46 +00:00
cgd
f519e9db90
files file to define 'tcbus' attribute, to which 'tc's attach.
...
also defines tc device. does _not_ define le driver, because
of conflicts with other (e.g. ISA) le drivers. (Alpha kernel
configuration files include files.isa and files.tc.)
1995-12-20 00:54:18 +00:00
cgd
cf967a312f
Machine-independent TurboChannel LANCE driver. As-is, this driver
...
should work properly with:
(1) LANCE chips hanging off the system IOCTL asic,
(2) LANCE chips TurboChannel option boards.
Support for various PMAX-family baseboard options isn't yet in this
file, but should be easy to add.
1995-12-20 00:52:16 +00:00
cgd
4c042472eb
autoconfiguration information for the TurboChannels System ("IOCTL") ASIC
...
found in many DECstations and all of the TC-bus Alphas. This is
provided so that the machine-independent TC if_le driver will be able
to use it.
1995-12-20 00:50:42 +00:00
cgd
eb45b93a9a
machine-independent TurboChannel bus configuration. These files
...
deal with stuff like:
(1) configuring built-in devices,
(2) looking at TC slots configuring any devices found.
The lists of slots, slot locations, etc. and built-in devices
are provided by machine-dependent code. Interrupt handling
is also provided by machine-dependent code, but the MD code provides
hooks so that standard names for 'establish' and 'disestablish'
can be used in drivers.
This code requires <machine/tc_machdep.h>, which defines some
portability types specific to the TurboChannel bus code.
1995-12-20 00:48:32 +00:00
ragge
e7aba578d3
MicroVAX III support added.
...
Dummy match/attach routines for tmscp.
Conversion of uda.c towards new config.
1995-12-13 19:02:47 +00:00
mycroft
7bb08a12f6
Make lewatchdog() take an int, not a short.
1995-12-11 19:48:53 +00:00
pk
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
mycroft
89f8e05c10
Trim NULs, in addition to spaces, in scsi_strvis().
1995-12-11 04:43:01 +00:00
mycroft
d51f726204
Fix typo, and eliminate some unneeded local variables.
1995-12-11 02:30:44 +00:00
mycroft
333f2e0065
Make several informational messages #ifdef LEDEBUG.
1995-12-11 02:21:56 +00:00
mycroft
77fce9fe33
Change format of probe messages slightly.
...
Add work-around for LANCE rev. C bug, iff LANCE_REVC_BUG is defined.
1995-12-10 08:55:07 +00:00
thorpej
7268bf552d
When unconfiguring a ccd, only free as many interleave indices as
...
were allocated, which may not be the same as the number of components
in the ccd. From Don Lewis <gdonl@gv.ssi1.com>. Fixes PR #1820 .
1995-12-08 19:13:26 +00:00
thorpej
1cd2ca323b
Remove a couple of now unneeded assignments.
1995-12-07 21:54:24 +00:00
thorpej
b6c6d46a82
In sdminphys(), add a comment about the semantics of the "length" field
...
in a 6-byte read/write cdb (namely, length == 0 really means 256), and
that we handle this conservatively by limiting the transfer to 255 blocks.
*sigh* One just never knows how a pre-scsi-1 device is going to behave.
1995-12-07 19:46:00 +00:00
thorpej
c9895db015
In both cd.c and sd.c:
...
If the read or write request can fit into a 6-byte cdb, then
use a 6-byte cdb, otherwise use the 10-byte as before.
In sd.c:
In sdattach(), make a note if the device is "ancient" (i.e.
inqbuf.version & SID_ANSII == 0).
Implement sdminphys(): if the device is "ancient", shorten the
transfer so it will fit into a 6-byte cdb.
These changes have eliminated the rejected read/write requests on my
Sun 3/60 with 2 ESDI disks behind an Emulex MD21.
1995-12-07 19:11:32 +00:00
christos
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
ragge
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
pk
7a7ca00077
Add quirk for Exabyte 8200/rev. 263H (from Paul Goyette; PR#1797).
1995-11-30 10:12:04 +00:00
jtc
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
pk
3b2862c858
Make it work on little-endian monochrome buffers; per Ted.
1995-11-29 22:12:58 +00:00
pk
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
cgd
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
cgd
523c12167c
fix definition of nullcnpollc, and add a prototype for it.
1995-11-25 00:03:35 +00:00
cgd
540ab1b88d
since 'long's in this code are meant to be exactly 32-bits wide, use
...
'int32_t's instead, so that this code is usable on the alpha.
1995-11-24 23:50:51 +00:00
cgd
13bf4371ae
delete extra (blank) line in comment block
1995-11-24 23:45:40 +00:00
gwr
97fc3b8321
get size of softc right
1995-11-17 23:33:34 +00:00
christos
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
christos
7a68425190
Don't use the softc at probe time on pci devices because it has not been
...
allocated yet. Thanks Charles...
1995-11-12 20:55:26 +00:00
mycroft
fbecb8d22b
Remove the gratuitous code to check for a disc at boot time.
1995-11-11 20:07:57 +00:00
christos
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
christos
ffa8bfeda1
pcidevs was changed
1995-11-10 19:36:29 +00:00
christos
c3ae59171a
- pcidevs: add 3c590 and adaptec ultra
...
- aic7xxx.c: fix the probe routines to use pcidevs.h
1995-11-10 19:36:08 +00:00
ragge
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
mycroft
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
mycroft
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
mycroft
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
thorpej
20783f6b85
Bring in several changes from the ccd:
...
* Be a bit better with prototypes
* Use struct dkdevice in vnd_softc.
* Prevent the unit from being unconfigured while open.
* Implement a simple locking mechanism and use it for sanity's
sake.
Still needs more work; needs to support disklabels and the like.
1995-11-06 20:28:09 +00:00
thorpej
664cb04670
Fix a race condition where if a process is asleep waiting on an
...
exclusive lock of a ccd device while another process is unconfiguring
that same device, the first process would never awaken (unless interrupted).
1995-11-06 19:58:01 +00:00
thorpej
f85819bc44
In ccdstart(), only translate the block number from partition-relative
...
to absolute if part != RAW_PART.
1995-11-03 02:35:54 +00:00
pk
8d78a257c0
More rogues.
1995-11-01 01:15:07 +00:00
gwr
4671e1d753
Add coyright, id string; fix comments
1995-10-26 15:46:24 +00:00
gwr
c35fd76e91
Fix a comment
1995-10-26 15:38:45 +00:00
pk
4ad1c05d71
DV_NULL should be DV_DULL.
1995-10-23 15:42:50 +00:00
pk
bcff7be6b7
DV_DISK => DV_NULL (from Mike Long; PR#1607).
1995-10-22 20:45:07 +00:00
pk
2f9169d20b
Correct NE7CMD_FORMAT command (from John Kohl; PR#1637).
1995-10-20 00:02:20 +00:00
thorpej
cbef9e5129
Add missing spindle synch control, rotational offset, and RPM members
...
to the rigid geometry mode page. These missing members are at the
end of the page, in space wich was previously marked "reserved".
1995-10-15 23:32:02 +00:00
mycroft
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
gwr
444e2789c6
Add quirk entries for Wangtek SCSI tapes. Also, add entry for
...
Tandberg 3800 (fixes PR#1592 - from Jochen Pohl).
1995-10-13 20:01:03 +00:00
thorpej
89d4987e5d
Fix bad pointer deref, memory leak, and geometry calculation, pointed
...
out by Jochen Pohl in PR #1588 . Change the interleave index to an
array of ints rather than an array of chars to avoid losing in the event
one has more than 127 components.
1995-10-12 21:28:32 +00:00
mycroft
dbce1a97aa
Add specs for ahc driver.
1995-10-10 12:16:54 +00:00
mycroft
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
mycroft
92221a1399
Return EINVAL if something other than a whole number of blocks is requested.
1995-10-10 02:52:56 +00:00
chopps
78bd894529
add prototypes for isr stuff fixes pr# 1284 and 1569
1995-10-09 15:19:58 +00:00
chopps
3973aeb080
fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de>
1995-10-09 14:05:24 +00:00
mycroft
b216bead49
Add an Adaptec 2940 driver, by John Aycock and Justin Gibbs, ported to NetBSD by Stefan
...
Grefen, with several bug fixes by me.
1995-10-09 09:49:30 +00:00
thorpej
a1bc374083
Batting 1.000: fix a potential panic situation in ccdioctl() that can occur
...
if ccdinit() fails.
1995-10-09 05:37:57 +00:00
thorpej
ab0109ad89
Fix up a couple of comments.
1995-10-09 05:21:09 +00:00
thorpej
4e3112d39b
Add the partition offset to the block number in ccdstart() as opposed
...
to ccdstrategy(), and do it in a way that doesn't corrupt the block number
for residuals. (What was I _thinking_?!)
1995-10-09 01:45:34 +00:00
thorpej
b8dcfbd303
Implement a simple locking mechanism and use it, for sanity's sake.
...
In ccdopen(), don't update the disklabel if any partition is already open.
Prevents race bewteen ccdstrategy() and ccdgetdisklabel().
1995-10-09 00:46:45 +00:00
gwr
9a79c5a043
Machine-independent RAM-disk driver.
1995-10-08 23:30:57 +00:00
mycroft
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
pk
476de93402
Remove `rc_font_ascent' from structure.
1995-10-05 13:17:51 +00:00
mycroft
d40c1f54bd
Lock the underlying vnode around VOP_BMAP() and VOP_READ(). From John Kohl.
1995-10-05 06:20:57 +00:00
pk
6a7edf0b56
Move font defs back into machine-dependent area (per Jonathan Stone).
...
Integrate patches from der Mouse (8-bit cleanliness, FULLSCREEN option,
SMALLFONT option).
The (MD) caller of rcons_init() is now responsible for initialising `rc_font'.
1995-10-04 23:57:17 +00:00
pk
0e646ae994
Move RCONSOLE files here and rename option to RASTERCONSOLE.
1995-10-04 23:35:31 +00:00
mycroft
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
mycroft
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
mycroft
0bc6ad73eb
Fix an oversight in the minphys routine.
1995-10-02 16:48:36 +00:00
mycroft
b5beeaaca9
Incorporate recent changes from Wolfgang and Stefan.
1995-10-01 20:51:34 +00:00
pk
db0107b895
Specify SCSI_DATA_OUT in sddump() (from John Kohl; PR#1482).
1995-09-30 22:57:19 +00:00
thorpej
b93138b93d
Add another broken NEC CD-ROM drive to The List. Fixes PR #1451 .
1995-09-26 23:37:50 +00:00
thorpej
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
pk
601a054fb3
Remove a sun3-ism.
1995-09-26 21:04:27 +00:00
thorpej
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
thorpej
249cddaaa7
Don't declare Debugger(). It's handled in <sys/systm.h>.
...
#include <sys/systm.h> where necessary, as suggested by Jonathan Stone.
Fixes PR #1511 .
1995-09-26 19:26:48 +00:00
thorpej
dd2f3dddef
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:24:26 +00:00
hpeyerl
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
pk
a8e925d362
rcons (Raster CONSole) brought over here from the sparc area.
...
sparc device dependencies have been removed, as well as all references
to `struct fbdevice's. Clients need to #include <dev/rcons/rcons.h>.
1995-09-17 19:56:30 +00:00
pk
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
hpeyerl
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
jonathan
d7b9b56e07
Rename the old pmax SCSI driver's "struct scsi_device" to
...
"struct pmax_scsi_device", to avoid name conflicts with the sys/dev/scsi
SCSI driver.
1995-09-13 19:35:53 +00:00
jonathan
dec12b783d
Initialization and keymapping code for DEC LK-201 and successor keyboards,
...
abstrated out of the pmax scc and dc7085 drivers.
1995-09-11 21:23:07 +00:00
jonathan
23366c17ff
Rename the old 4.4bsd/pmax old-style config "struct device" to
...
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-11 08:29:11 +00:00
thorpej
7e85a5a412
Fix misplaced #ifdef.
1995-09-06 04:15:59 +00:00
pk
589d83d6a8
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422).
...
Also repairs a problem noted by David Jones: detect scsi phase correctly.
1995-09-03 22:26:02 +00:00
thorpej
0696b30519
Wrap dk stats stuff in `#ifdef WORKING_DISK_STATISTICS'. Takes care
...
of PR #1388 until such time as dk stats works on all ports. XXX !!
1995-08-29 23:13:44 +00:00
thorpej
d6160bdc1b
Fix typo in comment, from Chris P. Ross.
1995-08-23 01:08:10 +00:00
jonathan
97cf65df4a
Change pmax ASC driver to use dynamically-allocated softc structures.
...
Concomitant changes to code that prints driver/unit name: use dv_xname
and dv_unit, instead of doing pointer arithmetic on elements of the static
softc array.
Remove support for old config. The old-config "driver" structure
is still present, because the pmax non-MI SCSI driver needs it.
Merge some off Per Fogelstrom's changes for the Pica driver,
which uses the machine-independent SCSI code. This is #ifdef'ed
out until the DMA is fixed to work on Decstations, too.
1995-08-21 21:22:43 +00:00
thorpej
a2db2c1899
Fix typo, pointed out by cross@va.pubnix.com (Chris P. Ross).
1995-08-21 18:25:52 +00:00
pk
d9e37f2bc7
Set the scsi link before calling config_attach(), so target/lun info is
...
available to, say, dk_establish().
1995-08-21 09:30:09 +00:00
leo
b7680d7c14
Select the right register structure for the Atari. Although it's big-endian,
...
it uses the odd bytes. Also make the registers volatile.
1995-08-20 13:24:05 +00:00
mycroft
4fec83b441
Fix oversights in previous change.
...
Remove ugly casts and correct spelling.
1995-08-19 04:58:44 +00:00
cgd
b0dc5d3d7f
local adaptations, and fix a could of compilation errors
1995-08-19 04:35:18 +00:00
cgd
1c8b202de7
use I/O ports on the i386
1995-08-19 04:27:31 +00:00
cgd
01597582c1
fix botch in one of my previous imports
1995-08-19 04:15:29 +00:00
cgd
9980150670
Generic FDDI support by Matt Thomas. Support for DEC "PDQ" FDDI chipset
...
and for the PCI attachment of said chipset ("if_fpa"), also from Matt Thomas.
Arguably, pdq* doesn't belong in sys/dev/ic, but it's going to be shared by
various bus attachment devices at some point in the future, and there's no
other place that seems to fit as well.
1995-08-19 00:59:47 +00:00
cgd
8b417fd28b
add 'fpa' for Matt Thomas's driver for DEC PCI FDDI boards. alphabetize.
1995-08-19 00:44:48 +00:00
cgd
c9dbf2d1d2
clean up 7/26 de snapshot import
1995-08-17 18:04:55 +00:00
thorpej
77d85de272
New version of ccd. Allows dynamic run-time configuration and
...
unconfiguration and supports disklabels.
1995-08-17 16:31:30 +00:00
cgd
a2e0a97608
check for null subclass pointer. From Todd Mummert
1995-08-16 04:54:50 +00:00
briggs
3560df43af
CHINON CDS-535 version Q117 also needs NOLUNS. Assume all 535s do.
1995-08-14 13:01:42 +00:00
briggs
19f3c3099f
Another SDEV_NOLUNS device from paul@pgoyette.bdt.com (Paul Goyette).
1995-08-13 17:48:57 +00:00
mycroft
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
mycroft
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
mycroft
8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
mycroft
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
jonathan
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
mycroft
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
mycroft
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
mycroft
92637a6d42
Add another Seagate disk to the list, and make all the disks match any
...
firmware revision.
1995-08-06 00:04:00 +00:00
mycroft
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
mycroft
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
mycroft
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
jonathan
1bacfdc2dd
Add preliminary support for new-style configuration: struct cfdriver,
...
and match and attach code. Still use the static softc so that drivers
work with kernels configured with either new or old config.
1995-08-04 00:26:35 +00:00
mycroft
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
mycroft
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
mycroft
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
mycroft
e04a2a7a7f
Add needs-flags for pci_subr.c.
1995-07-27 04:43:19 +00:00
mycroft
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
mycroft
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
mycroft
fc427776a7
Add stuff for I/O mapping.
1995-07-27 00:29:02 +00:00
mycroft
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
mycroft
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
cgd
d8e7ea659c
restore a deleted semicolon
1995-07-24 09:03:00 +00:00
cgd
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
cgd
4d0bd10d53
kill structure offest comments in non-fixed-size structures.
...
In some of our worlds, pointers just Aren't 4 bytes.
1995-07-24 07:08:14 +00:00
cgd
3301cf82fd
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 06:55:37 +00:00
cgd
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
cgd
979cf41d87
merge changes from update
1995-07-24 05:26:53 +00:00
mycroft
607e071f1b
Fix pasto.
1995-07-24 04:34:51 +00:00
mycroft
8170afdb2d
Copy changes from ISA version.
1995-07-24 04:15:35 +00:00
mycroft
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
cgd
267dd7012f
merge updated version from Matt Thomas, which includes dc21041 support.
...
There are a couple of questionable changes in here, that i'm going to
hammer out of him in the next week or so...
1995-07-24 03:54:14 +00:00
mycroft
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
mycroft
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
mycroft
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
mycroft
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
mycroft
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
mycroft
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
mycroft
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
mycroft
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
mycroft
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
mycroft
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
mycroft
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
mycroft
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
mycroft
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
mycroft
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
mycroft
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
mycroft
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
mycroft
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
mycroft
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
mycroft
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
mycroft
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
mycroft
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
mycroft
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
mycroft
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
mycroft
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
mycroft
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
brezak
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
brezak
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00