6b1f642521
Calculate the equivalent of `SHIFT_HZ' at run time, in initclocks().
1996-03-15 07:56:00 +00:00
1b7b5cb771
support nested #if/#else/#endif sets, to allow ULTRIX compat code to handle
...
Mips ULTRIX and VAX ULTRIX from the same syscall table.
1996-03-15 01:25:12 +00:00
e79beaff89
- fdopen -> filedescopen
...
- bring kgdb prototype in scope.
1996-03-14 19:01:08 +00:00
65bd075be8
Reran makesyscalls.sh.
1996-03-08 21:05:40 +00:00
79bb0bd2c7
Move an assignment inside #ifdef NTP.
1996-03-08 06:27:30 +00:00
4a43afe50f
- Make things compile cleanly after the NTP additions.
...
- Remove unused variables in exec_ecoff.c
1996-03-07 14:31:16 +00:00
a8804b9fb4
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft. (These are now generated files.)
1996-02-29 21:01:12 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
d66ea3596c
Add dependency for syscallargs.h.
1996-02-29 16:02:30 +00:00
1f6d8c1c1f
Fix for PR kern/2140: a typo in the nested CPP if/else/endif caused
...
SHIFT_HZ to be undefined for values of HZ other than 64.
1996-02-29 02:48:53 +00:00
c6a9e56518
Replace config_found() with config_found_sm(), which adds a cfmatch_t to the
...
argument list. This allows easy 'submatching', which will eliminate a fair
bit of slightly tricky duplicated code from various busses. config_found()
is now a #define in sys/device.h, which invokes config_found_sm().
1996-02-27 21:45:46 +00:00
e7ef034c05
Add NTP kernel precision timekeeping from Dave Mill's xntp distribution
...
and the "kernel.tar.Z" distribution on louie.udel.edu, which is older than
xntp 3.4y or 3.5a, but contains newer kernel source fragments.
This commit adds support for a new kernel configuration option, NTP.
If NTP is selected, then the system clock should be run at "HZ", which
must be defined at compile time to be one value from:
60, 64, 100, 128, 256, 512, 1024.
Powers of 2 are ideal; 60 and 100 are supported but are marginally less
accurate.
If NTP is not configured, there should be no change in behavior relative
to pre-NTP kernels.
These changes have been tested extensively with xntpd 3.4y on a decstation;
almost identical kernel mods work on an i386. No pulse-per-second (PPS)
line discipline support is included, due to unavailability of hardware
to test it.
With this in-kernel PLL support for NetBSD, both xntp 3.4y and xntp
3.5a user-level code need minor changes. xntp's prototype for
syscall() is correct for FreeBSD, but not for NetBSD.
1996-02-27 04:20:30 +00:00
c0cdc0cf04
when printing data modified on the free list:
...
(1) do not cast it to (void *), and
(2) print it as 0x%x, rather than %p.
This is not perfect (because the data being printed is "int32_t"-sized), but
is more correct than printing it as a pointer because the data is _not_ a
pointer, it is data to be printed in hex, and on some systems, pointers are
wider than the data items being printed, which leads to excess and misleading
output. The only 'right' solution to this is to have a printf specifier
that prints the fixed-sized types the right way, and that's not really
practical.
1996-02-20 23:56:16 +00:00
56a654e17f
Changes for NVSv3 code: pull in more NFS include files into kern_time.c
...
to get types right (overkill for just one function call, but oh well).
Clear B_NEEDCOMMIT in bdwrite().
1996-02-18 11:57:06 +00:00
20df3b41ab
uipc_proto.c: No need for the forward decls anymore; everything is prototyped.
...
kern_time.c: add header to get the NFS prototypes if needed.
1996-02-13 21:10:43 +00:00
09afd77655
More proto fixes
1996-02-09 18:59:18 +00:00
06a1236be9
Rearrange the locking in sys_unlink(), more like nfsrv_remove().
1996-02-09 15:39:12 +00:00
53fccab940
Fix vop_link, vop_symlink, and vop_remove semantics in several ways:
...
* Change the argument names to vop_link so they actually make sense.
* Implement vop_link and vop_symlink for all file systems, so they do proper
cleanup.
* Require the file system to decide whether or not linking and unlinking of
directories is allowed, and disable it for all current file systems.
1996-02-09 14:45:36 +00:00
d6b5a89f90
Use a default, 'safe' address to map the loader to in case the an emulation-
...
specific probe function did not specify it. It picks the same address
as mmap() does for a non-fixed map at address 0. See also the comment
around a similar line of code in vm/vm_mmap.c.
1996-02-09 13:25:54 +00:00
bf6bf23e7b
If parent is in ppwait, wake it up early to prevent deadlock.
1996-02-09 01:19:21 +00:00
7366dec9ec
No need for LOCKPARENT in sys_lstat(), and eliminate dead variables.
1996-02-08 02:54:20 +00:00
d9d402d0fb
Revert to sane symlink semantics. This something we should have done
...
long ago. Fixes many PRs.
1996-02-07 16:55:56 +00:00
00acf2040e
unp_detach() return type botch.
1996-02-04 20:32:15 +00:00
4aea4494ff
new files...
1996-02-04 02:19:27 +00:00
e630447d8c
First pass at prototyping
1996-02-04 02:17:43 +00:00
cc3c2e69cd
First pass at prototyping
1996-02-04 02:17:39 +00:00
8a5b1b92e2
First pass at prototyping
1996-02-04 02:15:01 +00:00
df9a562f20
Removed tty_compat.c; it is part of the kernel compat library...
1996-02-02 18:49:42 +00:00
bb7cccd06d
Do the previous change a little differently.
1996-02-02 07:49:52 +00:00
e19bfae4f9
Rename struct timespec fields to conform to POSIX.1b
1996-02-01 00:18:04 +00:00
99686e0059
Add a vnode** argument to getvnode(), prototype it, and make it return
...
EBADF if the file descriptor has been revoked.
1996-01-30 20:05:33 +00:00
436d930db5
Use insmntque() rather than manually frobbing the mount list.
1996-01-30 18:21:08 +00:00
6ffadcadf6
fix off-by-one error in tickfix code. (should increment when count >=
...
interval, because count goes from 0->(interval-1) to count interval
ticks.)
1996-01-17 04:37:31 +00:00
961c294fd5
* Don't rely on the protection bits of segments anymore to decide whether
...
it's text or data; use the entry point instead (this solves some trouble
with ELF executables with strange permissions)
* Incorporate some fixes from r_friedl@informatik.uni-kl.de sent to
netbsd-bugs a while ago
1996-01-16 23:07:18 +00:00
ba8a7101f0
Correct test for ECHONL (from der Mouse; PR#1922).
1996-01-10 20:52:27 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
f597a53319
Remove the process from zombproc and its parent's child list before freeing
...
its resources.
1995-12-24 11:23:33 +00:00
f183fc14f7
If __FORK_BRAINDAMAGE, continue stuffing retval[1] for the benefit of main().
1995-12-10 08:26:02 +00:00
6652367efa
(1) undef various EXEC_ cpp symbols before defining them, in case
...
they're already defined for some reason (this can happen
on the alpha, for example, which needs to define EXEC_ECOFF
in the std.alpha config file).
(2) minor spacing consistency.
1995-12-09 05:34:47 +00:00
af942a9add
Only expect vm_fork() to return if __FORK_BRAINDAMAGE is defined.
...
Use splstatclock() rather than splhigh() in one place.
Eliminate unused third arg to vm_fork().
1995-12-09 04:23:07 +00:00
bcd91943f8
Remove unused third arg to shmfork().
1995-12-09 04:12:56 +00:00
feb42498e3
If we abort, make sure to free ep_emul_arg.
1995-12-09 04:11:00 +00:00
00be80b604
Add a limfree(), and use it.
1995-12-09 04:09:32 +00:00
27b9d9f436
Eliminate an extra variable.
1995-12-09 04:07:41 +00:00
65806fd730
When converting from termios to sgtty, if RAW is set, use the previous\
...
settings of LITOUT and PASS8, since these cannot be determined from the\
termios modes.
1995-12-07 00:53:29 +00:00
a5d3f68110
Add hooks for COMPAT_HPUX.
1995-11-28 08:07:25 +00:00
b69dc1f62c
move ../sys/syscallargs.h out of the way when making new version,
...
just like we do for init_sysent.c, syscalls.c, and ../sys/syscall.h.
1995-11-22 23:11:32 +00:00
a321588516
update for new syscalls.master
1995-11-22 23:09:26 +00:00
a2ce90f34c
change definition of profil() to make it 64-bit friendly. This has
...
no practical consequence on 32-bit systems. old prototype was
int profil(char *, int, int, int), and new one is int profile(char *,
size_t, u_long, u_int). the size_t is the size of the buffer,
and the u_long is the 'starting offset'. (I changed the last int
to u_int, because it's treated as a u_int everywhere, and isn't
logically a signed value.)
1995-11-22 23:07:19 +00:00
7edc899fdd
ffs -> ufs
1995-11-11 22:00:15 +00:00
dd962ebbf6
Make sys_mount accept "ufs" as an alias for "ffs"
1995-11-07 22:41:02 +00:00
16c4374c1f
Make the ktrace code emit a record that indicates the current emulation
...
every time there is an attach or detach event.
1995-10-22 00:35:06 +00:00
ec64328797
Check for todo<0, done<0, and done>todo.
1995-10-10 02:51:45 +00:00
5a44558c93
Reran makesyscalls.sh.
1995-10-10 01:33:26 +00:00
44a38d8470
Add aliases for all compat functions.
1995-10-10 01:32:53 +00:00
2dd293d3c3
Add hooks for COMPAT_FREEBSD, from Noriyuki Soda.
1995-10-10 01:26:36 +00:00
c819cd372d
In lkmioctl(), disallow LMRESERV, LMLOADBUF, LMUNRESRV, LMREADY,
...
and LMUNLOAD if securelevel > 0. From Matthew Green <mrg@eterna.com.au>
1995-10-10 00:23:20 +00:00
55c46e9514
Reran makesyscalls.sh.
1995-10-07 06:41:34 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
2d9aa901e9
Write core dumps with mode 0600.
1995-10-06 16:12:05 +00:00
62f5268325
Fix oversight in previous.
1995-10-05 08:50:02 +00:00
9806359967
Make PARENB depend on RAW and ANYP, but not on LITOUT or PASS8.
1995-10-05 08:38:55 +00:00
1c5d240ffa
Make PASS8 = !ISTRIP and LITOUT = !OPOST, if CSIZE is CS8.
1995-10-05 02:45:06 +00:00
f5f86fc38b
Fix type errors.
1995-10-05 01:42:22 +00:00
210951a875
Switch to using SET(), CLR(), and ISSET() macros, like tty.c.
1995-10-05 01:35:07 +00:00
42c10934c1
Fix typo in declaration of exit(), pointed out by Chris Demetriou.
1995-09-27 20:26:51 +00:00
08cae70f24
fix annoying but non-critical rounding but in ttyinfo(). (If
...
microseconds goes over 10^6 when rounding, increment seconds.)
1995-09-22 00:11:35 +00:00
60024eb978
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 21:40:36 +00:00
1f5a887dbf
makesyscalls.sh changed
1995-09-19 21:31:49 +00:00
70bf3eea21
Emit prototypes for system call functions and append them to the
...
`syscallargs' header file.
1995-09-19 21:28:56 +00:00
7f6d48201f
s/memcmp/bcmp/
1995-09-16 00:28:08 +00:00
166530c153
Distribute cache entries more evenly
1995-09-08 14:15:07 +00:00
873ed30f83
so_pcb should be a void *.
1995-08-17 02:57:20 +00:00
a87c08a36e
Access rights are now stored in MT_CONTROL mbufs. Document this.
1995-08-16 01:03:19 +00:00
0ecd5256ad
Allocate PCBs with malloc(), more mgetclr(). Be more careful to free the
...
PCB after it's done with.
1995-08-16 00:29:50 +00:00
d23236204d
When resetting a signal, change ps_sigact, just to be sure.
1995-08-14 06:07:55 +00:00
5c03d498db
Fix typos.
1995-08-14 01:47:03 +00:00
2e95cf3d31
Implement SA_RESETHAND and SA_NODEFER.
...
Only return SA_NOCLDSTOP in the sigaction struct for SIGCHLD.
Rename ss_flags bits.
1995-08-13 22:53:59 +00:00
36a94a031a
Lock the process in core before operating on it.
1995-08-13 09:05:51 +00:00
5482957905
splnet --> splsoftnet
1995-08-12 23:59:09 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
0f77910137
Add and document a `kern.rawpartition' sysctl.
1995-08-04 18:36:08 +00:00
32b4385a97
fix bug pointed out by, and do the cleanup suggested by
...
Alasdair Baird <alasdair@wildcat.demon.co.uk>. From pr 1301.
1995-08-02 22:01:46 +00:00
605a125097
After an I/O operation completes, immediately set B_BUSY again. Also,
...
lower spl sooner, and remove an unneeded splbio()/splx() pair.
1995-07-27 02:37:12 +00:00
e9d17d38b5
avoid unnecessary aging of buffers. This used to make sense, when buffer
...
caches were much smaller, but makes little sense now, and will become more
useless as RAM (and buffer cache) sizes grow. Suggested by Bob Baron.
1995-07-24 21:19:27 +00:00
b45221af72
prototype strategy and minphys, use & check minphys return value
1995-07-24 07:45:24 +00:00
73d0d3717e
Don't toss out tty stop signals if we're being traced.
1995-07-24 03:18:42 +00:00
7de0fcfd12
Add KTR_EMUL to indicate a switch between syscall emulations.
...
Currently this record is emitted only on exec. Maybe it should
be emitted on ktrace() attach too.
1995-07-19 15:19:08 +00:00
f5bbdfba41
bdwrite() should upgrade writes to tape devices by sending them to
...
bawrite(). it's logically more correct (doesn't return an error code,
because it's async; bdwrite is also async), it still writes things
in-order, it makes sure the proper accountins is done (see the
wasdelayed cases in bwrite()), and it allows writes to vnodes on volumes
mountd with the MNT_ASYNC to be converted into delayed writes the way
God, err, Kirk intended. Convert synchronous bwrite()s on MNT_ASYNC
file systems to delayed writes.
1995-07-12 07:56:31 +00:00
9c3fe30d92
fix long-standing XXX in getblk(): NFS does funky things (somewhat
...
explained in comments), which can cause a race condition. amazingly,
the _only_ time i've ever seen or heard of this problem was in some
comments and sources by Rick Macklem, and when running against the
a DEC OSF/1 NFS server running on an Alpha.
1995-07-12 07:39:00 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
083ba962e2
Oops; need fcntl.h.
1995-07-03 16:58:38 +00:00
9a4505cb89
Close routines take file flags, not I/O flags. Fix two incorrect usages.
1995-07-02 18:13:02 +00:00
1654fca494
Remove unused define
1995-06-30 02:57:20 +00:00
3748c1aef7
try to insure that the 'default' address for shm segments is the same
...
from process to process. It apparently is on SysV systems, and some
programs depend on this. Suggested by John Birrell <jb@werple.mira.net.au>.
1995-06-29 11:43:17 +00:00
1a5a3c9199
Extracted all of the compat_xxx routines, and created a library [libcompat]
...
for them. There are a few #ifdef COMPAT_XX remaining, but they are not easy
or worth eliminating (yet).
1995-06-24 20:33:55 +00:00
8ef93cbcf5
Generic mi ELF loader; delete Linux and Svr4 compat conf entries and
...
add generic ELF entry to exec_conf.c
1995-06-22 21:29:47 +00:00
3176641085
fix pr 1128; change vfs_bufstats defn from DIAGNOSTIC - > DEBUG
1995-06-20 10:42:33 +00:00
8f62c773e8
don't assume the f_fsnamelen is nul-truncated or longer than MFSNAMELEN
1995-06-18 14:45:14 +00:00
d0601a093f
copy some format specifiers from kprintf to sprintf. b & r still missing
1995-06-16 10:52:17 +00:00
0cdb827026
Add Linux ELF module to the list of things to try.
1995-06-11 20:22:12 +00:00
d7e904a697
Fix various signal handling bugs:
...
* If we got a stopping signal while already stopped with the same signal,
the second signal would sometimes (but not always) be ignored.
* Signals delivered by the debugger always pretended to be stopping
signals.
* PT_ATTACH still didn't quite work right.
1995-06-08 23:51:01 +00:00
4a975bbe6f
If necessary, wake up the child during attach so we always get a SIGCHLD.
1995-06-05 20:57:54 +00:00
1e52ad70a9
We need some compat_10 routines if COMPAT_SUNOS is on (PR #1008 ).
1995-06-05 12:56:54 +00:00
3e6f699a75
Only do software flow control if IXOFF is set. Also fix hardware flow control
...
case in ttyblock().
1995-06-04 14:01:37 +00:00
3cd36c72ef
Use ISSET() and CLR() in two cases.
1995-06-04 12:57:52 +00:00
3eeacbcb2d
#include <sys/vnode.h>, for prototypes.
1995-06-03 05:53:28 +00:00
8dc3fb5a63
Use vaccess().
1995-06-02 19:04:22 +00:00
95ded74f58
Moved egid credential from cr_groups[0] to new field cr_gid. POSIX.1
...
requires that sgid executables and the setuid() syscall *not* change
the supplemental group list.
1995-06-01 22:43:30 +00:00
4a04bbaa09
add a facility by which to register 'hooks' to be run at shutdown time.
1995-05-31 20:41:44 +00:00
53eb79fc69
Preserve the ISWHITEOUT flag between cache_enter() and cache_lookup().
1995-05-30 09:02:02 +00:00
ce5fcc40af
Remove gratuitous extra indirections.
1995-05-23 06:11:29 +00:00
7e68171a95
properly determine if send/rcv timeout values are out of range.
1995-05-23 00:19:30 +00:00
bfd22ffde8
Generate the new ps_strings format.
1995-05-16 14:19:03 +00:00
fb371ccef0
tty_tb.c: need to include ioctl_compat.h in order to compile.
...
sysv_shm.c: make shm_find_segment_by_shmid global so it can be used by
COMPAT_HPUX. There should be a better way...
rest: Add #ifdef COMPAT_HPUX where needed
1995-05-10 16:52:53 +00:00
78356f06b3
Add two vprint()s, to give more informative panic messages.
1995-05-04 03:11:06 +00:00
3d9ffd41f3
make this work sanely on a 64-bit machine. Sacrifices a small bit of
...
error checking in the DIAGNOSTIC case. These changes might be backed out,
if it's decided that MINBUCKET should be 5 (rather than 4) on the alpha.
However, doing that has its own set of nasty consequences.
1995-05-01 22:39:11 +00:00
2581c66077
remember first error code (if any) that's different than ENOEXEC.
...
Not perfect, but there's no perfect solution to the "multiple interesting
error codes" problem.
1995-05-01 22:36:45 +00:00
2ca157b084
Make this compile again; from Ted Lemon
1995-04-25 21:10:01 +00:00
1c1cf96baf
makesyscalls.sh was changed
1995-04-22 19:43:50 +00:00
3d1b06ab09
- new copyargs routine.
...
- use emul_xxx
- deprecate nsysent; use constant SYS_MAXSYSCALL instead.
- deprecate ep_setup
- call sendsig and setregs indirectly.
1995-04-22 19:42:47 +00:00
5fe7be7a26
be a little smarter when printing syscall names & args
1995-04-22 14:17:18 +00:00
954487037b
Rearrange vfs_shutdown() slightly.
1995-04-21 22:09:53 +00:00
84f803aef6
Add a return type for vaccess().
1995-04-21 22:03:24 +00:00
f51cb8c974
Print a message for each file system that does not unmount cleanly. Add a
...
vfs_shutdown() routine that does the unmount and sync.
1995-04-21 21:55:11 +00:00
b92e5976ff
Rename pttty() to ptytty() to mimic ptyioctl().
1995-04-19 22:33:56 +00:00
cdd1a8eb54
Fix typo.
1995-04-19 18:58:14 +00:00
7aaa443e99
Implement pttty(), and rename pt_ioctl to pt_softc.
1995-04-19 18:50:21 +00:00
20b6b4f24d
Change ttselect() to use a callback to get the tty structure.
1995-04-19 18:46:10 +00:00
72adfee7f7
EMUL_IBCS2_ELF -> EMUL_SVR4; EMUL_IBCS2_{COFF,XOUT} -> EMUL_IBCS2
1995-04-13 20:48:14 +00:00
6cabaea642
Define vfs_unmountall(), to unmount file systems at shutdown time.
1995-04-10 19:46:56 +00:00
c75f9f2e07
Change `fdclose' to `fdrelease', to avoid confusion with device interfaces.
1995-04-10 18:27:59 +00:00
04a0a9a518
Use the new d_type field.
1995-04-10 00:46:51 +00:00
366ba9b889
Use sigcode fields in package structure. This seems to be the cleanest
...
way to deal with seperate trampoline code for emulation of other OSs,
it avoids having to clutter up kern_exec.c any further.
1995-04-07 22:33:23 +00:00
bb85930bbe
Add missing argument to closef().
1995-04-05 21:26:40 +00:00
9255f898e8
Added TIOCGSID for COMPAT_SVR4 [get session id]
1995-03-31 03:07:41 +00:00
46b2bb599f
Make definition of b_cylinder global.
1995-03-29 20:57:35 +00:00
a046d2374e
don't default return types to ints; specify them.
...
ktrsyscall takes (vp, code, argsize, args), and stores argsize rather
than nargs.
1995-03-26 07:48:47 +00:00
0310dd8f78
add an 'INSECURE' option which makes securelevel default to -1
1995-03-26 00:01:08 +00:00
fd10fb94e5
make it reasonable for processes to not double-map it's user area and kstack
1995-03-25 22:05:15 +00:00
f75ba16b09
Update to use timer{add,sub}().
1995-03-21 13:33:34 +00:00
7439778432
Use %p.
1995-03-19 23:44:44 +00:00
20a403a292
Nuke startinit_verbose.
1995-03-19 23:27:03 +00:00
fe62f9afca
Actually, do the previous differently.
1995-03-19 23:23:11 +00:00
feb5b4b126
Add a `%p' format.
1995-03-19 23:17:16 +00:00
a1615c4d35
Clean up comments related to last change, and remove an unneeded
...
splclock/splx pair.
1995-03-18 14:35:14 +00:00
b3f539b09c
add prototypes before each inline
1995-03-10 04:13:52 +00:00
fab1d8444c
Update to match syscalls.master.
1995-03-09 17:33:07 +00:00
mycroft