Commit Graph

120830 Commits

Author SHA1 Message Date
enami b3f1752123 Initialize an uninitialized variable. 2003-11-14 01:31:24 +00:00
uwe b12f3576c6 Use assembler version of bswap64. 2003-11-14 00:39:17 +00:00
uwe be72e49c47 bswap64 written in assembler. 2003-11-14 00:38:17 +00:00
scw bb0221494d Since data_abort_handler() may have to decode the instruction at tf->tf_pc
to determine if a fault is read or write, make sure tf->tf_pc is 32-bit
aligned before dereferencing it.

Otherwise, deliver an illegal instruction signal to the process. We don't
support execution of Thumb code at this time.
2003-11-14 00:21:30 +00:00
uwe 8fdd163272 Eliminate bzero. 2003-11-13 23:55:20 +00:00
fvdl 6cdccae32c Remove leftover debugging printf. 2003-11-13 23:00:54 +00:00
scw c86e508708 On Rhine III, don't set VR_EECSR_LOAD before reading the MAC address.
This reloads the entire EEPROM, not just the MAC address, which can
cause problems for the host PCI bus under certain circumstances. The
chip already loads the EEPROM at powerup/reset anyway.

XXX: This probably applies to the other Rhine variants too, but I don't
have a data sheet to confirm this behaviour.
2003-11-13 22:29:09 +00:00
bouyer 9494bbf9c9 If we detected an old drive on a channel, clear (ATA|ATAPI) for both
drives on the channel.
2003-11-13 22:18:10 +00:00
simonb d707aa947b Be consistent with "#define<tab>" in previous change. 2003-11-13 20:14:27 +00:00
itojun 08cbee504f avoid bswapl, which is post-i486 (including i486) insn. markus@openbsd 2003-11-13 19:36:31 +00:00
tsutsui 302df7965a Backout part of rev 1.4 which caused uninitialized pointer dereference.
(How does it works!?)
2003-11-13 15:53:31 +00:00
tsutsui d859f28a2d Use 32bit daddr_t for now so that uboot.lif works again.
XXX The real fix is adding prototype declarations for all functions.
2003-11-13 15:50:46 +00:00
christos 6dfe125b9c we could have lpt at puc. 2003-11-13 14:39:38 +00:00
sekiya 466d2c1848 libsa's iso9660 routines don't handle rockridge. Alter installation kernel
fixup routines accordingly -- we'll use "ip2x" and "ip3x" for install kernel
names rather than "netbsd-INSTALL32_IPxy".
2003-11-13 14:31:54 +00:00
sekiya c516224170 The bootloader names appeared in many more places than I originally
thought.  This commit should, finally, take care of all instances.
2003-11-13 14:07:38 +00:00
tsutsui 9b10e90d9a Don't use htobe32() for int16_t values. 2003-11-13 14:07:01 +00:00
tsutsui a0795dd18e Use int16_t and int32_t rather than short and int. 2003-11-13 14:06:22 +00:00
manu b5139de154 Enforce good santity checks with Mach messages sizes:
1) make sure Mach servers will not work on data beyond the end of the
   request message buffer.
2) make sure that on copying out the reply message buffer, we will not
   leak kernel data located after the buffer.
3) make sure that the server will not overwrite memory beyond the end
   of the reply message buffer. That check is the responsability of the
   server, there is just a DIAGNOSTIC test to check everything is in
   good shape. All currently implemented servers in NetBSD have been
   modified to check for this condition

While we are here, build the mach services table (formerly in mach_namemap.c)
and the services prototypes automatically from mach_services.master, just
as this is done for system calls.

The next step would be to fold the message formats in the mach_services.master
file, but this tends to be difficult, as some messages are quite long and
complex.
2003-11-13 13:40:39 +00:00
sekiya 27c0556eae -fno-gcse is unneccessary. 2003-11-13 13:18:56 +00:00
dsl 7a7ad1c63b Look for siginfo in the correct place - otherwise kdump is rebuilt all the time. 2003-11-13 13:07:01 +00:00
sekiya c93054ffbf typo in include directive. 2003-11-13 12:53:05 +00:00
sekiya 959569cd0c bootloader targets have changed, which confused the install rules. 2003-11-13 12:42:18 +00:00
yamt 5ee0718f8f plug memory leak on error. 2003-11-13 11:59:46 +00:00
itojun 6de72ce0f8 typo. minoura 2003-11-13 10:35:40 +00:00
dsl d7d05c9ee2 roundup() write of hp300 boot code to a multiplr of the disk sector size.
and re-instate the hp300 code - seems to work.
2003-11-13 08:19:43 +00:00
dsl 55302b835d Add hp300 LIF definitions 2003-11-13 08:17:12 +00:00
sekiya 40c0a4c30b loadfile truth check should be >=0, not >= 1. 2003-11-13 08:06:25 +00:00
sekiya 32b29fc3c8 Use new bootloader names. 2003-11-13 08:03:03 +00:00
sekiya 1ba2b99e3e More bootloader changes:
* if loading from cdrom, assume we're performing an install and
	  fix up bootpath/kernel to load the proper install kernel.
	* maximum filename length in volume header is eight characters.
	  Change boot.elf to ip2xboot, boot.ip32 to ip3xboot, and boot
	  to aoutboot (which matches kernel naming scheme as well).
2003-11-13 08:01:17 +00:00
simonb 967d9a12d5 Add NetBSD RCS id's. 2003-11-13 06:48:31 +00:00
wiz 6346fe2807 Bump date for uvm_useracc removal. 2003-11-13 06:46:02 +00:00
simonb bc4e986724 -traditional-cpp and spaces after commas is not a happy combination. 2003-11-13 06:29:39 +00:00
matt 9e7bfda285 Use ${HOST_LN}
Fix how hppa gets to -lgcc_pic
2003-11-13 05:56:30 +00:00
matt 707e787138 Add a HOST_LN. 2003-11-13 05:54:44 +00:00
matt 9bd74136be Use envariable AWK 2003-11-13 05:52:12 +00:00
chs c2d581f4ec uvm_useracc() is gone. 2003-11-13 03:45:01 +00:00
chs e07f0b9362 eliminate uvm_useracc() in favor of checking the return value of
copyin() or copyout().

uvm_useracc() tells us whether the mapping permissions allow access to
the desired part of an address space, and many callers assume that
this is the same as knowing whether an attempt to access that part of
the address space will succeed.  however, access to user space can
fail for reasons other than insufficient permission, most notably that
paging in any non-resident data can fail due to i/o errors.  most of
the callers of uvm_useracc() make the above incorrect assumption.  the
rest are all misguided optimizations, which optimize for the case
where an operation will fail.  we'd rather optimize for operations
succeeding, in which case we should just attempt the access and handle
failures due to insufficient permissions the same way we handle i/o
errors.  since there appear to be no good uses of uvm_useracc(), we'll
just remove it.
2003-11-13 03:09:28 +00:00
dbj be929a0a55 update to most recent versions 2003-11-13 03:06:40 +00:00
sekiya 2818624aab Include proper GENERIC32 templates (mechanical edit). 2003-11-13 02:59:37 +00:00
chs 709a3b4e52 two changes in improve scalability:
(1) split the single list of pages allocated to a pool into three lists:
     completely full, partially full, and completely empty.
     there is no longer any need to traverse any list looking for a
     certain type of page.

 (2) replace the 8-element hash table for out-of-page page headers
     with a splay tree.

these two changes (together with the recent enhancements to the wait code)
give us linear scaling for a fork+exit microbenchmark.
2003-11-13 02:44:01 +00:00
sekiya c034f6b247 Missed a mechanical edit in previous commit. 2003-11-13 02:34:24 +00:00
sekiya 96dd3017c1 Adapt to new config file naming convention. 2003-11-13 02:33:39 +00:00
sekiya 28bee58d65 Rationalize config file scheme. Discussed at length with rafal@, pooka@, soren@. 2003-11-13 02:31:46 +00:00
itojun 015dc7875b accelerate sha1 by using asm (i386). markus@openbsd.
there's internal symbol name changes, but it does not warrant shlib minor
bump as the symbol is totally internal.
2003-11-13 02:10:00 +00:00
jonathan fa24e6f3f8 Add m_tag_delete_nonpesrsistent(), for deleting all packet tags on
mbuf chains which are recycled (e.g., ICMP reflection, loopback
interface).  A consensus was reached that such recycled packets should
behave (more-or-less) the same way if a new chain had been allocated
and the contents copied to that chain.

Some packet tags may in future be marked as "persistent" (e.g., for
mandatory access controls) and should persist across such deletion.
NetBSD as yet hos no persistent tags, so m_tag_delete_nonpersistent()
just deletes all tags. This should not be relied upon.
2003-11-13 01:48:12 +00:00
christos a0e314dfe4 add noop wrapper functions for i386 2003-11-13 01:44:36 +00:00
cl 803f13c062 check deferred signals for all unblocked threads 2003-11-12 22:21:21 +00:00
cl e2c29624f5 Prevent sa_newcachelwp() from creating new LWPs when the process is exiting.
This should fix PR 23418 which was also reported by Thomas Klausner and
Ian Fry (who also provided core dumps for analysis - thanks!).

Also g/c sa_yieldcall since it's now safe to put LWPs back into the cache.
Also return stacks in failure case.
2003-11-12 21:27:46 +00:00
dsl 0342c9586a - Count number of zombies and stopped children and requeue them at the top
of the sibling list so that find_stopped_child can be optimised to avoid
  traversing the entire sibling list - helps when a process has a lot of
  children.
- Modify locking in pfind() and pgfind() to that the caller can rely on the
  result being valid, allow caller to request that zombies be findable.
- Rename pfind() to p_find() to ensure we break binary compatibility.
- Remove svr4_pfind since p_find willnow do the job.
- Modify some of the SMP locking of the proc lists - signals are still stuffed.

Welcome to 1.6ZF
2003-11-12 21:07:37 +00:00
dbj d3bad238a2 XXX an impossible malloc failure check in set_statfs_info 2003-11-12 20:38:24 +00:00