Commit Graph

12069 Commits

Author SHA1 Message Date
cgd 56db5baced print slot number as decimal, not hex 1996-06-05 01:32:00 +00:00
cgd 666c7f6fd4 interrupt counters for TurboChannel systems. 1996-06-05 00:30:48 +00:00
thorpej 56543dfb7d In sddump(), don't check the SDEV_MEDIA_LOADED bit of the device, since
that bit might have been cleared by successful unmounting of all filesystems
on the dump device, e.g. in the case of "reboot -d".
1996-06-04 23:12:14 +00:00
mhitch 3a8d18d828 Fix the oversight that the ASC SCSI adapter can also be on the
Turbochannel as well as the IOASIC.  It should now work on the 5000/200.
Removed the "aborts" which could leave the disk trashed when the abort
rebooted the system.  Fix the data corruption problem by clearing the
FIFO before starting a data transfer.
1996-06-04 21:08:24 +00:00
cgd 78937ab274 change > to >= in #endif comment, too. 1996-06-04 20:01:58 +00:00
cgd 6110ea9366 #ifdef tty_attach() with PCVT_NETBSD >= 120 (rather than just >),
since tty_attach() is now in the 1.2 release.
1996-06-04 19:53:28 +00:00
cgd abc294c9d9 don't tty_attach() the mouse emulator tty. 1996-06-04 19:47:51 +00:00
cgd 2d03e599c7 don't depend on being able to read the IMR. Apparently, it doesn't
work (as documented in the DEC 3000/[3-9]00 System Programmer's Manual)
in some of the older 3000/500 systems.
1996-06-04 19:02:16 +00:00
mrg b9c4c21d8e add a comment on how to use tty_attach(). 1996-06-04 13:59:10 +00:00
briggs 6959d64eeb Some more constants from Bob Nestor--MacTV ADB works, now. 1996-06-04 03:04:49 +00:00
pk 3dfb6ab8c0 Code the residual computation a bit differently. 1996-06-03 23:48:41 +00:00
mark b58401e04e Not needed. This was identical to the VOYAGER config. 1996-06-03 22:50:07 +00:00
mark 8477987501 Fixed lots and lots and lots of -Wall compiler warnings. 1996-06-03 22:44:53 +00:00
mark f2a8347cc4 Fixed -Wall compiler warnings.
Implemented a setsoftintr() function.
1996-06-03 22:44:36 +00:00
mark bfe01da7b5 Tidied up the prototype declarations. 1996-06-03 22:41:14 +00:00
mark 4732cc6c39 Make sure that the ethernet address has been set correctly before
attaching the interface to the network code.
1996-06-03 22:39:12 +00:00
mark 45842a3af6 Merged in the latest changes that have been mode to the isa lpt driver.
Merged in the latest plip code from the pc532 port.
1996-06-03 22:36:23 +00:00
mark 0217e55278 Fixed the softnet interrupt code to properly use netisr. 1996-06-03 22:33:51 +00:00
mark e2391b47fd Merged in the latest changes that have been made to the isa com driver. 1996-06-03 22:30:36 +00:00
mark f941f8cdb9 Fixed -Wall compiler warnings. 1996-06-03 22:20:32 +00:00
mark 1c9f0501fc Don't complain about a drive type of zero, just treat it as no drive
present.
1996-06-03 22:19:21 +00:00
mark 59e4127d96 Use the sync information in the mode definition to set the VIDC sync
polarity.
1996-06-03 22:14:56 +00:00
mark 2f6e37b679 Fixed -Wall compiler warnings. 1996-06-03 22:11:34 +00:00
pk 433594b99d missing semicolon 1996-06-03 22:11:23 +00:00
mark d4b96c659d Fixed -Wall compiler warnings introduced when fixing the vt220 printing
bug.
1996-06-03 22:08:37 +00:00
mark a2a08dd859 Removed the old QUADMOUSE_* ioctl names. Everything now uses the
generic mouse ones.
1996-06-03 22:07:39 +00:00
mark aa4be90f73 General code format tidy up.
Added missing function prototypes.
1996-06-03 22:04:40 +00:00
mark 0ba929925d Added proper definitions of quadrature mouse button register. 1996-06-03 22:03:36 +00:00
mark 258f83367c Added setsoftintr() prototype. 1996-06-03 22:00:50 +00:00
mark 0b265889c6 RCS Id police. 1996-06-03 21:58:25 +00:00
mark 515759c222 Added PLIP soft interrupt. 1996-06-03 21:57:52 +00:00
mark 10d9fbd5fe RCS Id police. 1996-06-03 21:55:46 +00:00
mark 89711a59f0 Fixed -Wall compiler warnings. 1996-06-03 21:53:33 +00:00
mark 17582aa655 Removed some dead code from cpu_exit().
Fixed -Wall compiler warnings.
1996-06-03 21:46:15 +00:00
mark 7d3a5033a5 Use special versions of the IRQdisable and IRQenable macros that
keep FIQ's active.
1996-06-03 21:43:06 +00:00
mark 2d9f11e999 Add visibale debugging info for the RC7500 board. 1996-06-03 21:41:09 +00:00
mark 2a56b05b3d Implemented cache and tlb flush functions for the StrongARM.
RCS Id police.
1996-06-03 21:38:05 +00:00
mark 8251f6e1f7 Fixed copyright message. 1996-06-03 21:36:14 +00:00
mark 6da55f03ee RCS Id police. 1996-06-03 21:35:10 +00:00
mark 6ecba1cbe0 Added extra diagnostic information that can be printed when the ARM700
prefetch abort bug occurs.
Fixed -Wall compiler warnings.
1996-06-03 21:32:11 +00:00
mark ff542922fa getdevice() now defaults to returning the a partition if no partition
is specified in the string.
Fixed -Wall compiler warnings.
1996-06-03 21:28:59 +00:00
mark bd72d43fdc Major code clean up. Now satisfies the source code style guide. 1996-06-03 21:27:21 +00:00
mark 5a66df3d3d RCS Id police. 1996-06-03 21:21:29 +00:00
cgd b1b4f705ba convert alpha vtophys() #defines to use __alpha_bus_XXX_dmamap(), to
get rid of the nasty (vtophys(va) | 0x40000000) expressions, and to make
the code more correct.
1996-06-03 20:30:21 +00:00
cgd c6dd609e7f gross hack to get around the fact that there are currently devices with
common back-ends that live on multiple very-different busses (e.g. PCI and
TC), which need bus-specific DMA mapping support.  As a nice side effect,
this will allow the especially nasty (vtophys(va) | 0x40000000) expressions
to go away in favor of less nasty bus-specific function calls.
1996-06-03 20:18:48 +00:00
cgd e038a84b34 add "le* at pci?", because it compiles and may actually work. 1996-06-03 20:10:52 +00:00
cgd 729d7a8aa8 only do tty_attach() for first tty of each chip; that's the only real tty. 1996-06-03 19:43:31 +00:00
is 7aaddee417 #define GRFIOCBLANK_LIVE and GRFIOCBLANK_DARK in grfioctl.h to make absolutely
clear which switches the video signal on and which off.
Make all grf_??.c (which supported it) use the same polarity of the test.
While being here, use a > test instead of implicit != to make it extensible
to darker than dark values for power managment systems.
1996-06-03 18:55:08 +00:00
cgd afe080291e fix pasto: s/NETISR_CCITT/NETISR_PPP/ at the appropriate place in
netintr().  From Matt Thomas <matt@lkg.dec.com>.
1996-06-03 18:32:37 +00:00
is 1530e15480 Don't get fooled by the CyberSCSI MK I, which uses the same man/prod id
as the Fastlane Z3, but is different enough to let the kernel crash.
Closes PR #2492 by Matthias Scheler. [thanks also to Ralph Schmidt for
confirmation of the patch]
1996-06-03 17:07:20 +00:00