5e1ff60d11
Change the name rc.conf.local to rc.local.conf. This makes *.conf match all
...
config files. Thanks to Greg Oster for the suggestion.
2000-01-18 22:43:23 +00:00
0028c40c50
While we're waiting for the new all singing, all dancing rc system, add
...
a way to configure local stuff; if the file rc.conf.local exists it
is sourced at the end of rc.conf.
2000-01-18 21:52:38 +00:00
f2672a9b29
We need to put /usr in critical_filesystems_beforenet since rc.subr
...
("mount_critical_filesystems local") makes no assumptions about /usr.
Under certain (semi-normal) conditions, /usr is never mounted until
"mount -a" late in rc(8), and This Is Bad.
1999-12-31 04:42:02 +00:00
623ede0b32
nit-picking spaces at EOL
1999-12-23 15:07:21 +00:00
be53038389
Consistency nit - use X11 in all comments not sometimes x11
1999-12-23 12:22:13 +00:00
c2ca3a16f3
Add a comment about the ifconfig_xxN variables.
1999-12-22 22:55:49 +00:00
c7a34c1de0
check for IPv6 kernel by exit status of "ifconfig lo0 inet6".
...
now IPv6 portion of netstart does not require /usr mount, it will mount it
as necessary (like pppd configuration do).
thanks goes to christos for the tip.
1999-12-20 15:12:23 +00:00
2d6fbd2789
Default to -z in savecore_flags
1999-12-06 20:38:13 +00:00
acc78cad94
accounting should be controllable via $accounting=YES in rc.conf...
1999-11-23 08:05:04 +00:00
0f6157b181
Remove update, it's no longer used.
1999-11-15 20:04:50 +00:00
80cfefa569
Disable portmap by default, and add some more comments in that section.
1999-11-05 11:19:49 +00:00
6e5d9aa87d
Add -f /var/db/ntp.drift to default xntpd parameters.
1999-10-09 21:07:19 +00:00
eac2fbdb83
Add support for $defcorename
1999-09-28 14:53:17 +00:00
02972f5985
add sanity check on rtadvd invocation (allowed on IPv6 routers only).
...
add rc.conf entry for rtsold.
1999-09-03 13:40:15 +00:00
79de537d1c
Screenblank has supported more than sun3 and sparc for a long, long time.
1999-08-16 20:01:03 +00:00
db20439533
repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus
...
"/usr" must be mounted. mount_critical_filesystems() didn't mount it,
even if listed in "critical_filesystems", if it is nfs.
Solution: introduce another rc.conf variable
"critical_filesystems_beforenet" which contains filesystems to be mounted
before "netstart".
Perhaps "netstart" should be split up, but this would make things even
more complex...
1999-07-07 21:24:56 +00:00
94e64335b4
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd).
...
Right now netsetart does not bother you even if you do not have
"options INET6" in the kernel.
1999-07-03 03:29:29 +00:00
aed7c5dbd9
usbd is dead.
1999-06-30 06:48:05 +00:00
05bdcfc198
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 03:30:02 +00:00
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
668efbbcec
Change mount_critical_filesystems() so that if given an argument
...
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.
1999-04-01 03:58:44 +00:00
5a90dbf495
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 13:10:17 +00:00
fce1081120
Add critfs_require_network, dhclient and dhclient_flags variables.
1999-03-24 18:50:07 +00:00
1cc109aa7d
rc.wscons can take arguments, so we shouldn't simply source it but exec in
...
a subshell. Being here, add a prototype wscons_flags variable.
1999-03-17 15:49:47 +00:00
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
4471dfd72e
oops, do not set a default securelevel.
1999-02-01 00:32:52 +00:00
eddf0f4e2c
increase the securelevel (using the same rules as before) much earlier in the
...
boot process. before cron, sendmail, inetd, etc, are run, but after lkms are
loaded. this avoids the chances of `@reboot', mail .forwards, remote logins,
etc., happening before the securelevel has been raised.
1999-01-31 08:46:58 +00:00
97a24ca055
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 12:42:46 +00:00
f6cc762de0
Enable cron to be turned on and off from rc.conf, like other daemons.
...
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 04:58:37 +00:00
4b0bbbdbe6
Add $portmap_flags variable, now that portmap has optional flags, and
...
by default, pass '-l' flag (libwrap logging) by analogy with inetd
1999-01-11 21:04:38 +00:00
d26897ab43
Separate hardware daemons and add comments.
1998-12-22 13:58:37 +00:00
76ee97dd88
do not start usbd by default.
1998-12-06 08:37:29 +00:00
96cda5fe94
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
...
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).
1998-10-29 20:24:56 +00:00
52c5bfaee0
Disable rc.lkm by default. This has the nontrivial, hidden effect that if
...
rc.lkm is run, and BIND is used to resolve names, the BEFORENET stage of
rc-calling-rc.lkm will hang trying to mount a nfs /usr.
1998-09-14 18:22:20 +00:00
55c8240d52
add /usr/pkg/sbin:/usr/pkg/bin to (commented out) PATH entry
1998-08-04 04:09:05 +00:00
250dd33583
Turn on the usbd daemon per default. It's harmless since it just
...
exits if there are no USB controller.
1998-08-01 20:57:59 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
048c02b861
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 19:01:13 +00:00
4c04041950
add "screenblank" support.
1998-04-07 04:47:33 +00:00
a6fc46b600
fix indentation
1998-01-26 12:01:35 +00:00
0a66272517
PR/3638: David Brownlee: Add /etc/ipnat.conf functionality.
1997-12-20 20:11:53 +00:00
40fa2961dc
fix formatting
1997-12-03 16:41:53 +00:00
d2cfb19c3d
print a warning if no swap devices are configured and "no_swap" is not YES.
1997-11-23 04:17:57 +00:00
dae7a8ed1d
- remove additional `adding interface aliases:' message.
...
- add `ppp_peers' support, which will run `pppd call <peer>' for each
peer listed in the ppp_peers file that also has a /etc/ppp/peers/<peer>
configuration file.
1997-11-17 17:45:28 +00:00
6ba565c4d3
Add options to rc.conf and rc to start xfs (x font server) and xdm.
...
Add entries to rc.conf.5.
While we're here, note that the domestic kerberos damons are still
Kerberos IV, not kerberos version 5.
1997-11-11 02:28:58 +00:00
a06997e6bd
Replace the (slightly broken) check to avoid double mounting of
...
filesystems by a correct one. (too bad that there was no agreement
about a mount option doing the same...)
Introduce a new rc.conf variable to mount user-defined filesystems
early in startup (eg for syslog, crashdumps, ...).
1997-10-10 09:37:54 +00:00
cb57cd9636
add $ipmon and $ipmon_flags, to control startup of ipmon(8)
1997-10-07 12:11:48 +00:00
augustss