2cc07c0541
Add a DIAGNOSTIC panic if (count-using) bus_space macros are called with
...
a count of zero. Some drivers do this accidentally and some bus_space
implementations will fail if count is passed as zero (they are set up in
a do-{}-while structure).
2000-07-31 14:59:15 +00:00
978acd5367
sync with GENERIC32; enable rnd
2000-07-31 13:21:45 +00:00
ec14782383
hardcode onboard "hme" to "hme0"
2000-07-31 13:16:24 +00:00
b5ce82b4a0
define BDPRINTF in the !DEBUG case to nothing. PR#10688.
2000-07-31 05:40:22 +00:00
3717acff97
We may wish to install from an SMC-based ethernet, too.
2000-07-31 02:06:48 +00:00
f5882c7ffa
Make sure that bus_space read/write functions that take a count will not be
...
called if count is zero. The smc91cxx driver, for example, may try to call
bus_space_write_multi_2() with a count of 0.
2000-07-30 23:17:23 +00:00
2f76646af1
Some uncommitted poking around. No functional change.
2000-07-30 21:48:54 +00:00
1e909ae3ca
Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case).
2000-07-30 21:46:39 +00:00
e74ae8ee59
M.d. glue for nubus SMC 91cxx-based cards--including Focus Interlan and
...
AsanteFAST.
2000-07-30 21:43:40 +00:00
fb9995989b
Make bus_space_write_region_2 usage match prototype.
2000-07-30 21:41:59 +00:00
d13747524c
Fixup for bogus assumptions about bus_space_handle_t.
2000-07-30 21:40:49 +00:00
c131e0d1b7
Remove unsupported Focus hardware--this is now probed in if_sm_nubus.
2000-07-30 21:40:09 +00:00
2bb296de77
Update hack to point to bus_space_handle base address.
2000-07-30 21:39:16 +00:00
9c85d4dc6a
Add byte-swap and stride options to bus_space. Allocate as normal, then
...
call mac68k_bus_space_handle_swapped() or mac68k_bus_space_handle_set_stride().
Stride is untested. Swapped code works for SMC ethernet.
2000-07-30 21:38:02 +00:00
a3f6fd2274
Add nubus attachment for smc91cxx driver.
2000-07-30 21:36:04 +00:00
77a537a1ba
Use M_SOFTINTR for soft interrupt sructures
2000-07-30 16:39:18 +00:00
537da4726d
Refresh screen when the system resume.
2000-07-30 11:16:54 +00:00
5f1e746912
Remove duplicated entry 22 in chrtoblk table.
...
Pointed out by Greg Kritsch on port-macppc mailing list.
2000-07-30 07:17:27 +00:00
1483e8c25e
Fix "suggest parentheses around assignment ..." warning in normally
...
unused code segment.
2000-07-30 06:11:38 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
bb1a798cbe
Move from sys/dev/apm. And rename apm -> apmdev.
2000-07-30 04:29:22 +00:00
d760e0b407
Add code to read the EISA configuration NVRAM as set up by
...
an EISA Configuration Utility. Code to access this data
is forthcoming.
XXX This could probably be made MI at some point.
2000-07-29 23:18:46 +00:00
e25636b5da
g/c RB_DFLTROOT
...
I've tried hard to find also various usage() messages and remove the
appropriate flag from there as well, hopefully all occurences are covered.
2000-07-29 20:06:27 +00:00
25e447156e
Fix printf format string. (recently SECDAY changed from unsigned long to int)
2000-07-29 11:11:53 +00:00
f23a2f015d
Set hostid.
2000-07-29 08:21:43 +00:00
44c9e5e16e
Really make this work for `dependall'. Also strip bootst.bug before
...
running it through wrtvid.
2000-07-28 20:08:20 +00:00
fe3f6176b4
Make 64-bit stack traces look prettier.
2000-07-28 19:10:33 +00:00
652a74ef51
Don't dump if there's no address space reserved for it.
2000-07-28 19:08:25 +00:00
0505a9e28a
Eliminate the other %:, using vsnprintf followed by printf.
2000-07-28 15:40:24 +00:00
85ae8ebac7
Prototype netintr().
2000-07-28 14:58:01 +00:00
ce9fd05593
Avoid a nonstandard %: format: printf("%:", fmt, ap) -> vprintf(fmt, ap)
2000-07-28 14:46:37 +00:00
4d52022987
Comment tidying
2000-07-28 09:54:56 +00:00
61edac627c
Convert the arm26 rtc driver to use pk's new todr(9) interface internally.
...
Nothing outside the driver will notice until we get proper MI I^2C.
2000-07-27 23:51:43 +00:00
379de37900
Make these work for the `dependall' target.
2000-07-27 21:06:53 +00:00
4a353b5330
Moving to a default of 64 PTYs.
2000-07-27 17:53:35 +00:00
b63ed164a1
convert PRID handling to use macros on an int, not bit-fields.
...
there's no reason to use bit-fields, and they just complexity to
the header.
2000-07-27 17:29:05 +00:00
0d5db1f645
Bump DFLDSIZ to 32MB since 16MB is no longer enough for some
...
parts of `make build'.
2000-07-27 14:48:58 +00:00
256fc99a68
include the 32-bit kernel, not myself
2000-07-27 14:39:50 +00:00
8b5a1a1dea
do the 32 bit / 64 bit name swap, as per GENERIC.
2000-07-27 14:38:45 +00:00
cc41b6af8f
remove COMPAT_AOUT option.
2000-07-27 14:34:06 +00:00
8f4e16a29e
G/C some obsolete HP-UX related flags, and prevent multiple
...
inclusion while I'm here.
2000-07-27 14:26:15 +00:00
110b948408
G/C MDP_HPUXTRACE since it is never set anywhere, so we don't actually
...
support HP-UX processes doing the tracing.
2000-07-27 14:25:14 +00:00
a254dae933
ebus sc_is is a pointer now, already.
2000-07-27 14:17:10 +00:00
dea4c479f5
intr_list_handler() should only take one argument. it ignored the 2nd anyway.
2000-07-27 14:13:50 +00:00
556a915306
add commented LOCKDEBUG
2000-07-27 14:10:25 +00:00
2726e45533
fix warnings.
2000-07-27 13:59:26 +00:00
270fd5cc55
delete unused variable.
2000-07-27 13:58:54 +00:00
eafc0ade2d
fix warnings.
2000-07-27 13:57:23 +00:00
926ed939b6
Fix grammatical error in panic msg
2000-07-27 10:12:31 +00:00
3eae1609f1
Fix to actually compile MIPS1 only.
2000-07-27 08:28:36 +00:00
briggs