2cc07c0541
Add a DIAGNOSTIC panic if (count-using) bus_space macros are called with
...
a count of zero. Some drivers do this accidentally and some bus_space
implementations will fail if count is passed as zero (they are set up in
a do-{}-while structure).
2000-07-31 14:59:15 +00:00
978acd5367
sync with GENERIC32; enable rnd
2000-07-31 13:21:45 +00:00
067f5e9814
Previous would have misbehaved if polled commands overlapped.
2000-07-31 13:16:34 +00:00
ec14782383
hardcode onboard "hme" to "hme0"
2000-07-31 13:16:24 +00:00
b5ce82b4a0
define BDPRINTF in the !DEBUG case to nothing. PR#10688.
2000-07-31 05:40:22 +00:00
35913a898c
Sync internal state and ifmedia state. Addresses PR#10424.
2000-07-31 03:25:11 +00:00
3628f3e00c
Make sure that we do not call bus_space_*_multi_* with zero count.
2000-07-31 02:14:47 +00:00
3717acff97
We may wish to install from an SMC-based ethernet, too.
2000-07-31 02:06:48 +00:00
f5882c7ffa
Make sure that bus_space read/write functions that take a count will not be
...
called if count is zero. The smc91cxx driver, for example, may try to call
bus_space_write_multi_2() with a count of 0.
2000-07-30 23:17:23 +00:00
100a4a6b22
Add support for the W83781D and W83782D hardware monitors.
2000-07-30 22:23:53 +00:00
2f76646af1
Some uncommitted poking around. No functional change.
2000-07-30 21:48:54 +00:00
1e909ae3ca
Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case).
2000-07-30 21:46:39 +00:00
e74ae8ee59
M.d. glue for nubus SMC 91cxx-based cards--including Focus Interlan and
...
AsanteFAST.
2000-07-30 21:43:40 +00:00
fb9995989b
Make bus_space_write_region_2 usage match prototype.
2000-07-30 21:41:59 +00:00
d13747524c
Fixup for bogus assumptions about bus_space_handle_t.
2000-07-30 21:40:49 +00:00
c131e0d1b7
Remove unsupported Focus hardware--this is now probed in if_sm_nubus.
2000-07-30 21:40:09 +00:00
2bb296de77
Update hack to point to bus_space_handle base address.
2000-07-30 21:39:16 +00:00
9c85d4dc6a
Add byte-swap and stride options to bus_space. Allocate as normal, then
...
call mac68k_bus_space_handle_swapped() or mac68k_bus_space_handle_set_stride().
Stride is untested. Swapped code works for SMC ethernet.
2000-07-30 21:38:02 +00:00
a3f6fd2274
Add nubus attachment for smc91cxx driver.
2000-07-30 21:36:04 +00:00
e6dde2bd42
Add MII support to smc91cxx driver. This is supported for the 91c100
...
and 91c100FD (FEAST) controllers. Existing controllers should continue
to work as they have. Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
057458abac
msdosfs_getattr(): do not report archived files (those with ATTR_ARCHIVE unset)
...
as having flag SF_ARCHIVED on; this is wrong for directories, which don't
have any mode flags on msdosfs, so it's always treated as archived,
which leads to problems described in pr #8439 . The semantics of the
archive flag differs between Unix and msdos/windoze, so it's better
to not set the flag at all even for regular files, to avoid surprises.
This fixes bin/8439 by Thomas Klausner.
2000-07-30 20:16:48 +00:00
538126d75a
swap lm_match() and wb_match(), as wb_match() is more restrictive.
...
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
2000-07-30 17:22:26 +00:00
77a537a1ba
Use M_SOFTINTR for soft interrupt sructures
2000-07-30 16:39:18 +00:00
537da4726d
Refresh screen when the system resume.
2000-07-30 11:16:54 +00:00
560ce4e272
Don't need to include <uvm/uvm_extern.h> in NetBSD case anymore.
2000-07-30 09:29:28 +00:00
5f1e746912
Remove duplicated entry 22 in chrtoblk table.
...
Pointed out by Greg Kritsch on port-macppc mailing list.
2000-07-30 07:17:27 +00:00
4bb34ff30e
Remove inclusion of <uvm/uvm_extern.h> that was there only to keep
...
<sys/sysctl.h> happy.
2000-07-30 06:22:04 +00:00
1483e8c25e
Fix "suggest parentheses around assignment ..." warning in normally
...
unused code segment.
2000-07-30 06:11:38 +00:00
32ef6bb0e7
sync comment with reality
2000-07-30 05:30:37 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
0036ac92be
clarify comment. from jhawk. sync with kame.
2000-07-30 04:33:34 +00:00
bb1a798cbe
Move from sys/dev/apm. And rename apm -> apmdev.
2000-07-30 04:29:22 +00:00
5e8b5a35e4
make ipsec_strerror(3) to return const char *, not char *. sync with kame.
2000-07-30 02:38:35 +00:00
d760e0b407
Add code to read the EISA configuration NVRAM as set up by
...
an EISA Configuration Utility. Code to access this data
is forthcoming.
XXX This could probably be made MI at some point.
2000-07-29 23:18:46 +00:00
e25636b5da
g/c RB_DFLTROOT
...
I've tried hard to find also various usage() messages and remove the
appropriate flag from there as well, hopefully all occurences are covered.
2000-07-29 20:06:27 +00:00
d569dc2fb5
Whitespace fix (space rather than tab after #ifdef)
2000-07-29 17:49:08 +00:00
cbd3022e31
Make this compile without PUCCN defined.
2000-07-29 17:43:38 +00:00
25e447156e
Fix printf format string. (recently SECDAY changed from unsigned long to int)
2000-07-29 11:11:53 +00:00
f23a2f015d
Set hostid.
2000-07-29 08:21:43 +00:00
597ed25d3d
Adoid excessive use of "return" in "excessive()".
2000-07-28 21:49:09 +00:00
db4919f6b7
Use "NULL" and not "0" for null pointers.
2000-07-28 21:38:44 +00:00
b2bf026f39
Guard the console code in puc.c with the defopt PUCCN so we can
...
use the puc driver without having the com drivers.
2000-07-28 20:43:45 +00:00
44c9e5e16e
Really make this work for `dependall'. Also strip bootst.bug before
...
running it through wrtvid.
2000-07-28 20:08:20 +00:00
457d8d7c7e
print parent device name too, so we know which socket a card was probed at
...
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
fe3f6176b4
Make 64-bit stack traces look prettier.
2000-07-28 19:10:33 +00:00
652a74ef51
Don't dump if there's no address space reserved for it.
2000-07-28 19:08:25 +00:00
67c55e543e
Fix CTRL-T to behave properly. It should swaps the current and previous
...
characters, not the previous and second-to-previous.
2000-07-28 16:33:39 +00:00
0505a9e28a
Eliminate the other %:, using vsnprintf followed by printf.
2000-07-28 15:40:24 +00:00
85ae8ebac7
Prototype netintr().
2000-07-28 14:58:01 +00:00
ce9fd05593
Avoid a nonstandard %: format: printf("%:", fmt, ap) -> vprintf(fmt, ap)
2000-07-28 14:46:37 +00:00
briggs