chris
551471e419
Restore the other files needed for cats build, should really move these elsewhere.
2002-02-09 11:43:27 +00:00
skrll
3f587bd84e
Bring this file back as it is needed by CATS, atm.
2002-02-09 11:03:55 +00:00
lukem
971861de37
use ${INSTALL_FILE} as appropriate
2002-02-09 09:35:59 +00:00
eeh
48198ba7ca
Fix microsecond calculation in microtime.
2002-02-09 05:01:39 +00:00
eeh
c068b28bac
Increase NMBCLUSTERS.
2002-02-09 04:58:53 +00:00
eeh
c42bdc6b14
Correctly take into account the satck bias in CLKF_INTR().
2002-02-09 04:50:13 +00:00
thorpej
e01bd95698
* The Npwr only has 5 interrupt sources, all in XINT3, so don't bother
...
reading XINT0 (which isn't even implemented by the CPLD on Npwr).
* Adjust the mask of valid IRQ bits for the Npwr.
2002-02-09 03:52:31 +00:00
thorpej
727b4699ce
The Npwr has a 19-bit timer. Make sure values programmed into
...
the counter fit.
2002-02-08 23:50:53 +00:00
eeh
424177d21b
Provide more info in psycho_ue.
2002-02-08 20:04:14 +00:00
eeh
bfba946595
Handle the case where a DMA operation wraps from the end of a page to the
...
beginning of the same page properly by double-mapping that page.
2002-02-08 20:03:45 +00:00
uwe
7948c19410
Cosmetic changes: clean up debugging ifdefs and use consistent wording
...
in panic messages.
2002-02-08 13:10:42 +00:00
chris
fbc89911ed
Fix location of some headers, IPAQ kernel now manages to make depend.
2002-02-08 10:37:16 +00:00
gmcgarry
787dd8e0e3
Enter DDB on break if console.
2002-02-08 07:26:16 +00:00
gmcgarry
dad6eb472b
Remove old, custom files.
2002-02-08 06:17:03 +00:00
uch
b3308f4d3d
TLB dump command added to DDB
2002-02-08 06:12:00 +00:00
uch
da20ab3589
add SH3/SH4 namespace free defines.
2002-02-08 06:11:38 +00:00
uch
66510b76a9
add SH-internal memory mapped register access method.
2002-02-08 06:11:16 +00:00
thorpej
9716a068b6
* No need to specify the console speed anymore; it defaults to the
...
correct speed if IOP310_TEAMASA_NPWR is defined.
* Just wildcard the "wm" and "siop" devices.
* Comment out raid and ccd for now.
2002-02-08 03:43:41 +00:00
thorpej
66c81951ae
Default the console to the correct speed on the Npwr (so that
...
it doesn't have to be set in the kernel config file).
2002-02-08 03:41:56 +00:00
briggs
efca4d520d
Wire the internal devices to the right interrupts on NPWR.
2002-02-08 03:28:24 +00:00
thorpej
987cb42a95
No point in setting the ATU Subsys vendor/dev ID on boards that
...
can't plug into a PCI host.
2002-02-08 02:31:12 +00:00
thorpej
367a9543a7
The Npwr doesn't have the board_rev/cpld_rev/backplane_det registers,
...
do don't bother reading them.
2002-02-08 02:30:12 +00:00
jmcneill
a7ff227011
Wups, forgot to add it to some other kernel configs as well.
2002-02-08 01:49:33 +00:00
jmcneill
f7c49dc7e6
Add another pcic at isa attachment. This enables the top PCMCIA slot on
...
my AST Ascentia 910N, and closes port-i386/11797
2002-02-08 01:47:59 +00:00
briggs
6331bb5b24
Let this compile with the IOP310_TEAMASA_NPWR option.
2002-02-08 01:42:41 +00:00
briggs
07ec97aeba
finish conversion from TEAMASA_NPWR to IOP310_TEAMASA_NPWR
2002-02-08 01:41:48 +00:00
eeh
4daea20c93
Move a brace so this will compile w/o DEBUG.
2002-02-08 00:47:04 +00:00
thorpej
140c8fe847
Don't hard-code the console address in error messages.
2002-02-07 23:53:01 +00:00
tv
e716d57285
Don't spew so much to the console without DEBUG.
2002-02-07 23:23:29 +00:00
eeh
d3d818a6f4
Fix register allocation in microtime().
2002-02-07 22:23:01 +00:00
eeh
6390142ec0
Make bus_space_barrier() an inline instead of a function vector.
2002-02-07 21:36:54 +00:00
eeh
92ef550481
Overhaul iommu_dvmamap_load_raw().
2002-02-07 21:35:26 +00:00
thorpej
2b9837b4d9
Add support for the Team ASA Npwr IOP310-based server appliance.
2002-02-07 21:34:23 +00:00
uch
b4156f9314
fix # of page directory entry.
2002-02-07 17:06:00 +00:00
uch
6b71166f4e
add missing cache flush code.
2002-02-07 17:05:22 +00:00
briggs
9827f27b9f
Update from thorpej:
...
* Define type and size of _mcount stub to make PIC code happy.
* Rename mcount to __mcount to get it out of the user namespace.
2002-02-07 05:13:35 +00:00
ross
5014982b5b
add ess0
2002-02-07 02:16:04 +00:00
jdolecek
104f7c34d6
joyvar.h is now at <dev/ic/joyvar.h>
2002-02-06 21:32:16 +00:00
thorpej
d17cc4f043
* Move some generic ARM OpenFirmware stuff into arch/arm/ofw (still
...
more can move, but not yet).
* Garbage-collect some cruft from arch/arm32 in preparation for
renaming to arch/shark.
2002-02-06 21:30:25 +00:00
kleink
3b7a9506f7
Printf the 601's HID0.
2002-02-06 20:00:48 +00:00
thorpej
690f10fea7
Use arm/conf/Makefile.arm, and add support for building ELF kernels
...
and converting them to a.out.
2002-02-06 19:59:41 +00:00
kleink
69e30815cf
Add a printf bitmask for HID0.
2002-02-06 19:59:30 +00:00
thorpej
c9a1155bcf
Adjust for new location of elf2aout.sh, and echo the command before
...
executing it (like we do for other commands).
2002-02-06 19:59:01 +00:00
wiz
2e56fbc7e0
Another <tab> -> <sp><tab> noted by Patrick Welche.
2002-02-06 19:58:02 +00:00
thorpej
5113cbfb17
A slightly cleaned up version of chris/nick's elf2aout.sh for ARM
...
platforms.
2002-02-06 19:54:47 +00:00
thorpej
da13cb2fb5
Back out all the vm_page_md changes. They are causing some
...
mysterious problems (a similar change to the i386 pmap causes
mysterious problems there, as well), and the issue needs to
be investigated more.
2002-02-06 17:41:42 +00:00
thorpej
4611193917
Efficiency tweaks, some made possible by vm_page_md.
2002-02-06 17:32:35 +00:00
kleink
8785df9eae
Oops, typo in previous, too.
2002-02-06 12:26:02 +00:00
kleink
ec9a0b843e
* Fix typos and misusage !PMAP_MAP_POOLPAGE mb_map allocation.
...
* Use pmap_kenter_pa() for mapiodev().
2002-02-06 12:24:48 +00:00
chris
ffd3311a48
LINKADDRESS != LOADADDRESS, so fix that typo.
...
Also move the elf2aout conversion to be last in the build sequence, this means that strip is run on the elf kernel.
Also have dbsym run on the kernel, this should allow us to have symbols in the kernel.
This now means kernels boot and run, and can also have ddb symbols.
2002-02-06 00:55:56 +00:00