entering rtentry's for hosts we're not actually communicating
with.
Do this by invoking the ctlinput for the protocol, which is
responsible for validating the ICMP message:
* TCP -- Lookup the connection based on the address/port
pairs in the ICMP message.
* AH/ESP -- Lookup the SA based on the SPI in the ICMP message.
If validation succeeds, ctlinput is responsible for calling
icmp_mtudisc(). icmp_mtudisc() then invokes callbacks registered
by protocols (such as TCP) which want to take some sort of special
action when a path's MTU changes. For TCP, this is where we now
refresh cached routes and re-enter slow-start.
As a side-effect, this fixes the problem where TCP would not be
notified when a path's MTU changed if AH/ESP were being used.
XXX Note, this is only a fix for the IPv4 case. For the IPv6
XXX case, we need to wait for the KAME folks.
Reviewed by sommerfeld@netbsd.org and itojun@netbsd.org.
basis. default: 100pps
set default value for net.inet.tcp.rstratelimit to 0 (disabled),
NOTE: it does not work right for smaller-than-1/hz interval. maybe we should
nuke it, or make it impossible to set smaller-than-1/hz value.
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
RTM_IFINFO is now 0xf, 0xe is RTM_OIFINFO which returns the old (if_msghdr14)
struct with 32bit counters (binary compat, conditioned on COMPAT_14).
Same for sysctl: node 3 is renamed NET_RT_OIFLIST, NET_RT_IFLIST is now node 4.
Change rt_msg1() to add an mbuf to the mbuf chain instead of just panic()
when the message is larger than MHLEN.
MSS advertisement must always be:
max(if mtu) - ip hdr siz - tcp hdr siz
We violated this in the previous code so it was fixed.
tcp_mss_to_advertise() now takes af (af on wire) as its argument,
to compute right ip hdr siz.
tcp_segsize() will take care of IPsec header size.
One thing I'm not really sure is how to handle IPsec header size in
*rxsegsizep (inbound segment size estimation).
The current code subtracts possible *outbound* IPsec size from *rxsegsizep,
hoping that the peer is using the same IPsec policy as me.
It may not be applicable, could TCP gulu please comment...
Stale syn cache entries are useless because none of them will be used
if there is no listening socket, as tcp_input looks up listening socket by
in_pcblookup*() before looking into syn cache.
This fixes race condition due to dangling socket pointer from syn cache
entries to listening socket (this was introduced when ipsec is merged in).
This should preserve currently implemented behavior (but not 4.4BSD
behavior prior to syn cache).
Tested in KAME repository before commit, but we'd better run some
regression tests.
when ip header and tcp header are not adjacent to each other
(i.e. when ip6 options are attached).
To test this, try
telnet @::1@::1 port
toward a port without responding server. Prior to the fix, the kernel will
generate broken RST packet.
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
where one side can think a connection exists, where the other side thinks
the connection was never established.
The original problem was first reported by Ty Sarna in PR #5909. The
original fix I made to the code didn't cover all cases. The problem this
fix addresses was reported by Christoph Badura via private e-mail.
Many thanks to Bill Sommerfeld for helping me to test this code, and
for finding a subtle bug.
- Don't use tcp_respond(), instead create the tcp/ip header from scratch,
and send it ourself.
- Reuse the mbuf that carried the SYN, or allocate one if that is not
available.
- Cache the route we look up to do the Path MTU Discovery check, and
transfer the reference to that route to the inpcb when the connection
completes.
* Macro'ize a small, but often repeated code fragment.
syn_cache_unreach() should remove the entry, or just continue on.
Algorithm is to only remove the entry if we've had more than one unreach
error and have retransmitted 3 or more times. This prevents the following
scenario, as noted in PR #5909 (PR from Ty Sarna, scenario from
Charles Hannum):
* Host A sends a SYN.
* Host A retransmits the SYN.
* Host B gets the first SYN and sends a SYN-ACK.
* Host B gets the second SYN and sends a SYN-ACK.
* One of the SYN-ACK bounces with an
ICMP unreachable, causing the `SYN cache' entry to be
removed with no notification.
* Host A receives the other SYN-ACK, sends an ACK, and goes to
ESTABLISHED state.
Should fix PR #5909.
- Don't use home-grown queue manipulation. Use <sys/queue.h> instead. The
data structures are a little larger, but we are otherwise wasting the
memory chunk anyway (we're already a 64-byte malloc bucket).
- Fix a bug in the cache-is-full case: if the oldest element removed from
the first non-empty bucket was the only element in the bucket, the
bucket wouldn't be removed from the bucket cache, causing queue corruption
later.
- Optimize the syn cache timers by using PRT timers rather than home-grown
decrement-and-propagate timers.
This code is now a fair bit smaller, and significantly easier to read
and understand.
the protocol dispatch layer for TCP timers. This saves having to
modify a potentially large number of timer values (which were shorts,
and expanded to ... a lot of code on the Alpha).
the burst size allowed, but rather a fixed number of packets, as
described in the Internet Draft. Default allowed burst is 4 packets,
per the Draft.
Make the use of CWM and the allowed burst size tunable via sysctl.
conditional (tcp_compat_42). The kernel config option TCP_COMPAT_42
will still enable this by default, or disable this by default if the
option is not included (i.e. current behavior). This will be made a
sysctl soon.
TCP connections by using the MTU of the interface. Also added
a knob, mss_ifmtu, to force all connections to use the MTU of
the interface to calculate the advertised MSS.
code, as clarified in the TCPIMPL WG meeting at IETF #41: If the SYN
(active open) or SYN,ACK (passive open) was retransmitted, the initial
congestion window for the first slow start of that connection must be
one segment.
in the packet. This fixes a bug that was resulting in extra packets
in retransmissions (the second packet would be 12 bytes long,
reflecting the RFC1323 timestamp option size).
The sysctl'able variable "tcp_init_win", when set to 0, selects an
auto-tuning algorithm for selecting the initial window, based on transmit
segment size, per discussion in the IETF tcpimpl working group.
Default initial window is still 1 segment, but will soon become 2 segments,
per discussion in tcpimpl.
