adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
72a5ed2e26
allow "sh MAKEDEV ttyNN", where NN is 00 to 99.
...
single-digit "sh MAKEDEV ttyN" works in backward-compatible way.
XXX should bring it to other ports as well?
2000-01-09 02:37:06 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
47523083ea
support fully qualified machdep names.
1999-12-15 05:23:13 +00:00
a87378c54a
Prototype file that selects i387 if the fpu is present.
1999-12-13 10:17:49 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
62d46f73e8
Improve the USB comments.
1999-09-15 21:18:10 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
735b324857
Add "audio" target to create links "audio", "audioctl", "mixer" and
...
"sound" pointing to the first unit's device nodes.
1999-07-12 09:33:59 +00:00
412733582c
typo
1999-06-09 01:45:49 +00:00
efffa3db54
Make sure fd is a directory before we df it.
1999-06-09 01:39:29 +00:00
7658a91815
Create *wd[23]? device nodes, so that machines with more than two IDE
...
drives can be installed.
XXX The 1.4 single-floppy install has only 24 free inodes, but 32 are needed
by this. Some more work is needed (e.g., change newfs parameters for the
ram disk, or switch back to a 2-floppy install).
1999-05-31 11:14:07 +00:00
a3f17d2959
Don't barf when we have fdesc mounted. Just skip the devices fdesc provides
1999-05-28 21:00:50 +00:00
7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
1fad0940a8
Need pseudo-ttys on INSTALL disk now (due to sysinst).
1999-03-09 19:31:00 +00:00
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
275e4ce247
wscons is default now - replace the "ttyv0" getty by a number of
...
"ttyEn" lines.
Thanks to "Johnny C. Lam" <lamj@stat.cmu.edu> for pointing out.
1999-02-02 14:33:04 +00:00
37ac3cf82a
Add an entry for 2.88MB floppies, even though we can't write them
...
directly yet. Useful for El Torito bootable CDs, though.
1999-02-01 20:20:00 +00:00
93fc448539
Add tty2 to 'all' and 'floppy' targets (that's how a PnP or pcmcia modem
...
will get called with a standart kernel).
1999-01-27 10:26:08 +00:00
d7ec8ee3a8
Because PCVT only offers 8 virtual consoles by default create only 8
...
device nodes. Fixes PR port-i386/6876 by Scott Telford.
1999-01-25 21:44:22 +00:00
thorpej